// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
error TokenAddressIsZero();
error TokenNotSupported();
error CannotBridgeToSameNetwork();
error ZeroPostSwapBalance();
error NoSwapDataProvided();
error NativeValueWithERC();
error ContractCallNotAllowed();
error NullAddrIsNotAValidSpender();
error NullAddrIsNotAnERC20Token();
error NoTransferToNullAddress();
error NativeAssetTransferFailed();
error InvalidBridgeConfigLength();
error InvalidAmount();
error InvalidContract();
error InvalidConfig();
error UnsupportedChainId(uint256 chainId);
error InvalidReceiver();
error InvalidDestinationChain();
error InvalidSendingToken();
error InvalidCaller();
error AlreadyInitialized();
error NotInitialized();
error OnlyContractOwner();
error CannotAuthoriseSelf();
error RecoveryAddressCannotBeZero();
error CannotDepositNativeToken();
error InvalidCallData();
error NativeAssetNotSupported();
error UnAuthorized();
error NoSwapFromZeroBalance();
error InvalidFallbackAddress();
error CumulativeSlippageTooHigh(uint256 minAmount, uint256 receivedAmount);
error InsufficientBalance(uint256 required, uint256 balance);
error ZeroAmount();
error InvalidFee();
error InformationMismatch();
error NotAContract();
error NotEnoughBalance(uint256 requested, uint256 available);
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
interface IDiamondCut {
    enum FacetCutAction {
        Add,
        Replace,
        Remove
    }
    // Add=0, Replace=1, Remove=2
    struct FacetCut {
        address facetAddress;
        FacetCutAction action;
        bytes4[] functionSelectors;
    }
    /// @notice Add/replace/remove any number of functions and optionally execute
    ///         a function with delegatecall
    /// @param _diamondCut Contains the facet addresses and function selectors
    /// @param _init The address of the contract or facet to execute _calldata
    /// @param _calldata A function call, including function selector and arguments
    ///                  _calldata is executed with delegatecall on _init
    function diamondCut(
        FacetCut[] calldata _diamondCut,
        address _init,
        bytes calldata _calldata
    ) external;
    event DiamondCut(FacetCut[] _diamondCut, address _init, bytes _calldata);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
import { LibDiamond } from "./Libraries/LibDiamond.sol";
import { IDiamondCut } from "./Interfaces/IDiamondCut.sol";
import { LibUtil } from "./Libraries/LibUtil.sol";
contract LiFiDiamond {
    constructor(address _contractOwner, address _diamondCutFacet) payable {
        LibDiamond.setContractOwner(_contractOwner);
        // Add the diamondCut external function from the diamondCutFacet
        IDiamondCut.FacetCut[] memory cut = new IDiamondCut.FacetCut[](1);
        bytes4[] memory functionSelectors = new bytes4[](1);
        functionSelectors[0] = IDiamondCut.diamondCut.selector;
        cut[0] = IDiamondCut.FacetCut({
            facetAddress: _diamondCutFacet,
            action: IDiamondCut.FacetCutAction.Add,
            functionSelectors: functionSelectors
        });
        LibDiamond.diamondCut(cut, address(0), "");
    }
    // Find facet for function that is called and execute the
    // function if a facet is found and return any value.
    // solhint-disable-next-line no-complex-fallback
    fallback() external payable {
        LibDiamond.DiamondStorage storage ds;
        bytes32 position = LibDiamond.DIAMOND_STORAGE_POSITION;
        // get diamond storage
        // solhint-disable-next-line no-inline-assembly
        assembly {
            ds.slot := position
        }
        // get facet from function selector
        address facet = ds.selectorToFacetAndPosition[msg.sig].facetAddress;
        if (facet == address(0)) {
            revert LibDiamond.FunctionDoesNotExist();
        }
        // Execute external function from facet using delegatecall and return any value.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // copy function selector and any arguments
            calldatacopy(0, 0, calldatasize())
            // execute function call using the facet
            let result := delegatecall(gas(), facet, 0, calldatasize(), 0, 0)
            // get any return value
            returndatacopy(0, 0, returndatasize())
            // return any return value or error back to the caller
            switch result
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    // Able to receive ether
    // solhint-disable-next-line no-empty-blocks
    receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
library LibBytes {
    // solhint-disable no-inline-assembly
    // LibBytes specific errors
    error SliceOverflow();
    error SliceOutOfBounds();
    error AddressOutOfBounds();
    error UintOutOfBounds();
    // -------------------------
    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;
        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)
            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)
            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)
            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }
            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))
            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)
            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }
            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }
        return tempBytes;
    }
    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.
                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(
                    sc,
                    add(
                        and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00),
                        and(mload(mc), mask)
                    )
                )
                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))
                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))
                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)
                sstore(sc, add(sload(sc), and(mload(mc), mask)))
                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }
                mask := exp(0x100, sub(mc, end))
                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }
    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        if (_length + 31 < _length) revert SliceOverflow();
        if (_bytes.length < _start + _length) revert SliceOutOfBounds();
        bytes memory tempBytes;
        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)
                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)
                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)
                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }
                mstore(tempBytes, _length)
                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)
                mstore(0x40, add(tempBytes, 0x20))
            }
        }
        return tempBytes;
    }
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        if (_bytes.length < _start + 20) {
            revert AddressOutOfBounds();
        }
        address tempAddress;
        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }
        return tempAddress;
    }
    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        if (_bytes.length < _start + 1) {
            revert UintOutOfBounds();
        }
        uint8 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }
        return tempUint;
    }
    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        if (_bytes.length < _start + 2) {
            revert UintOutOfBounds();
        }
        uint16 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }
        return tempUint;
    }
    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        if (_bytes.length < _start + 4) {
            revert UintOutOfBounds();
        }
        uint32 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }
        return tempUint;
    }
    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        if (_bytes.length < _start + 8) {
            revert UintOutOfBounds();
        }
        uint64 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }
        return tempUint;
    }
    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        if (_bytes.length < _start + 12) {
            revert UintOutOfBounds();
        }
        uint96 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }
        return tempUint;
    }
    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        if (_bytes.length < _start + 16) {
            revert UintOutOfBounds();
        }
        uint128 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }
        return tempUint;
    }
    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        if (_bytes.length < _start + 32) {
            revert UintOutOfBounds();
        }
        uint256 tempUint;
        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }
        return tempUint;
    }
    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        if (_bytes.length < _start + 32) {
            revert UintOutOfBounds();
        }
        bytes32 tempBytes32;
        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }
        return tempBytes32;
    }
    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;
        assembly {
            let length := mload(_preBytes)
            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1
                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)
                for {
                    let cc := add(_postBytes, 0x20)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }
        return success;
    }
    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;
        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)
                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1
                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)
                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)
                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        // solhint-disable-next-line no-empty-blocks
                        for {
                        } eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }
        return success;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
import { IDiamondCut } from "../Interfaces/IDiamondCut.sol";
import { LibUtil } from "../Libraries/LibUtil.sol";
import { OnlyContractOwner } from "../Errors/GenericErrors.sol";
/// Implementation of EIP-2535 Diamond Standard
/// https://eips.ethereum.org/EIPS/eip-2535
library LibDiamond {
    bytes32 internal constant DIAMOND_STORAGE_POSITION = keccak256("diamond.standard.diamond.storage");
    // Diamond specific errors
    error IncorrectFacetCutAction();
    error NoSelectorsInFace();
    error FunctionAlreadyExists();
    error FacetAddressIsZero();
    error FacetAddressIsNotZero();
    error FacetContainsNoCode();
    error FunctionDoesNotExist();
    error FunctionIsImmutable();
    error InitZeroButCalldataNotEmpty();
    error CalldataEmptyButInitNotZero();
    error InitReverted();
    // ----------------
    struct FacetAddressAndPosition {
        address facetAddress;
        uint96 functionSelectorPosition; // position in facetFunctionSelectors.functionSelectors array
    }
    struct FacetFunctionSelectors {
        bytes4[] functionSelectors;
        uint256 facetAddressPosition; // position of facetAddress in facetAddresses array
    }
    struct DiamondStorage {
        // maps function selector to the facet address and
        // the position of the selector in the facetFunctionSelectors.selectors array
        mapping(bytes4 => FacetAddressAndPosition) selectorToFacetAndPosition;
        // maps facet addresses to function selectors
        mapping(address => FacetFunctionSelectors) facetFunctionSelectors;
        // facet addresses
        address[] facetAddresses;
        // Used to query if a contract implements an interface.
        // Used to implement ERC-165.
        mapping(bytes4 => bool) supportedInterfaces;
        // owner of the contract
        address contractOwner;
    }
    function diamondStorage() internal pure returns (DiamondStorage storage ds) {
        bytes32 position = DIAMOND_STORAGE_POSITION;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            ds.slot := position
        }
    }
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    function setContractOwner(address _newOwner) internal {
        DiamondStorage storage ds = diamondStorage();
        address previousOwner = ds.contractOwner;
        ds.contractOwner = _newOwner;
        emit OwnershipTransferred(previousOwner, _newOwner);
    }
    function contractOwner() internal view returns (address contractOwner_) {
        contractOwner_ = diamondStorage().contractOwner;
    }
    function enforceIsContractOwner() internal view {
        if (msg.sender != diamondStorage().contractOwner) revert OnlyContractOwner();
    }
    event DiamondCut(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);
    // Internal function version of diamondCut
    function diamondCut(
        IDiamondCut.FacetCut[] memory _diamondCut,
        address _init,
        bytes memory _calldata
    ) internal {
        for (uint256 facetIndex; facetIndex < _diamondCut.length; ) {
            IDiamondCut.FacetCutAction action = _diamondCut[facetIndex].action;
            if (action == IDiamondCut.FacetCutAction.Add) {
                addFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else if (action == IDiamondCut.FacetCutAction.Replace) {
                replaceFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else if (action == IDiamondCut.FacetCutAction.Remove) {
                removeFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
            } else {
                revert IncorrectFacetCutAction();
            }
            unchecked {
                ++facetIndex;
            }
        }
        emit DiamondCut(_diamondCut, _init, _calldata);
        initializeDiamondCut(_init, _calldata);
    }
    function addFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        if (_functionSelectors.length == 0) {
            revert NoSelectorsInFace();
        }
        DiamondStorage storage ds = diamondStorage();
        if (LibUtil.isZeroAddress(_facetAddress)) {
            revert FacetAddressIsZero();
        }
        uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
        // add new facet address if it does not exist
        if (selectorPosition == 0) {
            addFacet(ds, _facetAddress);
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; ) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            if (!LibUtil.isZeroAddress(oldFacetAddress)) {
                revert FunctionAlreadyExists();
            }
            addFunction(ds, selector, selectorPosition, _facetAddress);
            unchecked {
                ++selectorPosition;
                ++selectorIndex;
            }
        }
    }
    function replaceFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        if (_functionSelectors.length == 0) {
            revert NoSelectorsInFace();
        }
        DiamondStorage storage ds = diamondStorage();
        if (LibUtil.isZeroAddress(_facetAddress)) {
            revert FacetAddressIsZero();
        }
        uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
        // add new facet address if it does not exist
        if (selectorPosition == 0) {
            addFacet(ds, _facetAddress);
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; ) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            if (oldFacetAddress == _facetAddress) {
                revert FunctionAlreadyExists();
            }
            removeFunction(ds, oldFacetAddress, selector);
            addFunction(ds, selector, selectorPosition, _facetAddress);
            unchecked {
                ++selectorPosition;
                ++selectorIndex;
            }
        }
    }
    function removeFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
        if (_functionSelectors.length == 0) {
            revert NoSelectorsInFace();
        }
        DiamondStorage storage ds = diamondStorage();
        // if function does not exist then do nothing and return
        if (!LibUtil.isZeroAddress(_facetAddress)) {
            revert FacetAddressIsNotZero();
        }
        for (uint256 selectorIndex; selectorIndex < _functionSelectors.length; ) {
            bytes4 selector = _functionSelectors[selectorIndex];
            address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
            removeFunction(ds, oldFacetAddress, selector);
            unchecked {
                ++selectorIndex;
            }
        }
    }
    function addFacet(DiamondStorage storage ds, address _facetAddress) internal {
        enforceHasContractCode(_facetAddress);
        ds.facetFunctionSelectors[_facetAddress].facetAddressPosition = ds.facetAddresses.length;
        ds.facetAddresses.push(_facetAddress);
    }
    function addFunction(
        DiamondStorage storage ds,
        bytes4 _selector,
        uint96 _selectorPosition,
        address _facetAddress
    ) internal {
        ds.selectorToFacetAndPosition[_selector].functionSelectorPosition = _selectorPosition;
        ds.facetFunctionSelectors[_facetAddress].functionSelectors.push(_selector);
        ds.selectorToFacetAndPosition[_selector].facetAddress = _facetAddress;
    }
    function removeFunction(
        DiamondStorage storage ds,
        address _facetAddress,
        bytes4 _selector
    ) internal {
        if (LibUtil.isZeroAddress(_facetAddress)) {
            revert FunctionDoesNotExist();
        }
        // an immutable function is a function defined directly in a diamond
        if (_facetAddress == address(this)) {
            revert FunctionIsImmutable();
        }
        // replace selector with last selector, then delete last selector
        uint256 selectorPosition = ds.selectorToFacetAndPosition[_selector].functionSelectorPosition;
        uint256 lastSelectorPosition = ds.facetFunctionSelectors[_facetAddress].functionSelectors.length - 1;
        // if not the same then replace _selector with lastSelector
        if (selectorPosition != lastSelectorPosition) {
            bytes4 lastSelector = ds.facetFunctionSelectors[_facetAddress].functionSelectors[lastSelectorPosition];
            ds.facetFunctionSelectors[_facetAddress].functionSelectors[selectorPosition] = lastSelector;
            ds.selectorToFacetAndPosition[lastSelector].functionSelectorPosition = uint96(selectorPosition);
        }
        // delete the last selector
        ds.facetFunctionSelectors[_facetAddress].functionSelectors.pop();
        delete ds.selectorToFacetAndPosition[_selector];
        // if no more selectors for facet address then delete the facet address
        if (lastSelectorPosition == 0) {
            // replace facet address with last facet address and delete last facet address
            uint256 lastFacetAddressPosition = ds.facetAddresses.length - 1;
            uint256 facetAddressPosition = ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
            if (facetAddressPosition != lastFacetAddressPosition) {
                address lastFacetAddress = ds.facetAddresses[lastFacetAddressPosition];
                ds.facetAddresses[facetAddressPosition] = lastFacetAddress;
                ds.facetFunctionSelectors[lastFacetAddress].facetAddressPosition = facetAddressPosition;
            }
            ds.facetAddresses.pop();
            delete ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
        }
    }
    function initializeDiamondCut(address _init, bytes memory _calldata) internal {
        if (LibUtil.isZeroAddress(_init)) {
            if (_calldata.length != 0) {
                revert InitZeroButCalldataNotEmpty();
            }
        } else {
            if (_calldata.length == 0) {
                revert CalldataEmptyButInitNotZero();
            }
            if (_init != address(this)) {
                enforceHasContractCode(_init);
            }
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, bytes memory error) = _init.delegatecall(_calldata);
            if (!success) {
                if (error.length > 0) {
                    // bubble up the error
                    revert(string(error));
                } else {
                    revert InitReverted();
                }
            }
        }
    }
    function enforceHasContractCode(address _contract) internal view {
        uint256 contractSize;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            contractSize := extcodesize(_contract)
        }
        if (contractSize == 0) {
            revert FacetContainsNoCode();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
import "./LibBytes.sol";
library LibUtil {
    using LibBytes for bytes;
    function getRevertMsg(bytes memory _res) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }
    /// @notice Determines whether the given address is the zero address
    /// @param addr The address to verify
    /// @return Boolean indicating if the address is the zero address
    function isZeroAddress(address addr) internal pure returns (bool) {
        return addr == address(0);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0 ^0.8.0 ^0.8.17 ^0.8.4;

// lib/solmate/src/tokens/ERC20.sol

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

// src/Errors/GenericErrors.sol

/// @custom:version 1.0.1

error AlreadyInitialized();
error CannotAuthoriseSelf();
error CannotBridgeToSameNetwork();
error ContractCallNotAllowed();
error CumulativeSlippageTooHigh(uint256 minAmount, uint256 receivedAmount);
error DiamondIsPaused();
error ETHTransferFailed();
error ExternalCallFailed();
error FunctionDoesNotExist();
error InformationMismatch();
error InsufficientBalance(uint256 required, uint256 balance);
error InvalidAmount();
error InvalidCallData();
error InvalidConfig();
error InvalidContract();
error InvalidDestinationChain();
error InvalidFallbackAddress();
error InvalidReceiver();
error InvalidSendingToken();
error NativeAssetNotSupported();
error NativeAssetTransferFailed();
error NoSwapDataProvided();
error NoSwapFromZeroBalance();
error NotAContract();
error NotInitialized();
error NoTransferToNullAddress();
error NullAddrIsNotAnERC20Token();
error NullAddrIsNotAValidSpender();
error OnlyContractOwner();
error RecoveryAddressCannotBeZero();
error ReentrancyError();
error TokenNotSupported();
error TransferFromFailed();
error UnAuthorized();
error UnsupportedChainId(uint256 chainId);
error WithdrawFailed();
error ZeroAmount();

// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// src/Interfaces/ILiFi.sol

/// @title LIFI Interface
/// @author LI.FI (https://li.fi)
/// @custom:version 1.0.0
interface ILiFi {
    /// Structs ///

    struct BridgeData {
        bytes32 transactionId;
        string bridge;
        string integrator;
        address referrer;
        address sendingAssetId;
        address receiver;
        uint256 minAmount;
        uint256 destinationChainId;
        bool hasSourceSwaps;
        bool hasDestinationCall;
    }

    /// Events ///

    event LiFiTransferStarted(ILiFi.BridgeData bridgeData);

    event LiFiTransferCompleted(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );

    event LiFiTransferRecovered(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );

    event LiFiGenericSwapCompleted(
        bytes32 indexed transactionId,
        string integrator,
        string referrer,
        address receiver,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount
    );

    // Deprecated but kept here to include in ABI to parse historic events
    event LiFiSwappedGeneric(
        bytes32 indexed transactionId,
        string integrator,
        string referrer,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount
    );
}

// src/Libraries/LibBytes.sol

/// @custom:version 1.0.0

library LibBytes {
    // solhint-disable no-inline-assembly

    // LibBytes specific errors
    error SliceOverflow();
    error SliceOutOfBounds();
    error AddressOutOfBounds();

    bytes16 private constant _SYMBOLS = "0123456789abcdef";

    // -------------------------

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        if (_length + 31 < _length) revert SliceOverflow();
        if (_bytes.length < _start + _length) revert SliceOutOfBounds();

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(
                    add(tempBytes, lengthmod),
                    mul(0x20, iszero(lengthmod))
                )
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(
                        add(
                            add(_bytes, lengthmod),
                            mul(0x20, iszero(lengthmod))
                        ),
                        _start
                    )
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(
        bytes memory _bytes,
        uint256 _start
    ) internal pure returns (address) {
        if (_bytes.length < _start + 20) {
            revert AddressOutOfBounds();
        }
        address tempAddress;

        assembly {
            tempAddress := div(
                mload(add(add(_bytes, 0x20), _start)),
                0x1000000000000000000000000
            )
        }

        return tempAddress;
    }

    /// Copied from OpenZeppelin's `Strings.sol` utility library.
    /// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/8335676b0e99944eef6a742e16dcd9ff6e68e609/contracts/utils/Strings.sol
    function toHexString(
        uint256 value,
        uint256 length
    ) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// lib/solady/src/utils/SafeTransferLib.sol

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/SafeTransferLib.sol)
/// @author Modified from Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @author Permit2 operations from (https://github.com/Uniswap/permit2/blob/main/src/libraries/Permit2Lib.sol)
///
/// @dev Note:
/// - For ETH transfers, please use `forceSafeTransferETH` for DoS protection.
/// - For ERC20s, this implementation won't check that a token has code,
///   responsibility is delegated to the caller.
library SafeTransferLib_0 {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The ETH transfer has failed.
    error ETHTransferFailed();

    /// @dev The ERC20 `transferFrom` has failed.
    error TransferFromFailed();

    /// @dev The ERC20 `transfer` has failed.
    error TransferFailed();

    /// @dev The ERC20 `approve` has failed.
    error ApproveFailed();

    /// @dev The Permit2 operation has failed.
    error Permit2Failed();

    /// @dev The Permit2 amount must be less than `2**160 - 1`.
    error Permit2AmountOverflow();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         CONSTANTS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Suggested gas stipend for contract receiving ETH that disallows any storage writes.
    uint256 internal constant GAS_STIPEND_NO_STORAGE_WRITES = 2300;

    /// @dev Suggested gas stipend for contract receiving ETH to perform a few
    /// storage reads and writes, but low enough to prevent griefing.
    uint256 internal constant GAS_STIPEND_NO_GRIEF = 100000;

    /// @dev The unique EIP-712 domain domain separator for the DAI token contract.
    bytes32 internal constant DAI_DOMAIN_SEPARATOR =
        0xdbb8cf42e1ecb028be3f3dbc922e1d878b963f411dc388ced501601c60f7c6f7;

    /// @dev The address for the WETH9 contract on Ethereum mainnet.
    address internal constant WETH9 = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;

    /// @dev The canonical Permit2 address.
    /// [Github](https://github.com/Uniswap/permit2)
    /// [Etherscan](https://etherscan.io/address/0x000000000022D473030F116dDEE9F6B43aC78BA3)
    address internal constant PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       ETH OPERATIONS                       */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    // If the ETH transfer MUST succeed with a reasonable gas budget, use the force variants.
    //
    // The regular variants:
    // - Forwards all remaining gas to the target.
    // - Reverts if the target reverts.
    // - Reverts if the current contract has insufficient balance.
    //
    // The force variants:
    // - Forwards with an optional gas stipend
    //   (defaults to `GAS_STIPEND_NO_GRIEF`, which is sufficient for most cases).
    // - If the target reverts, or if the gas stipend is exhausted,
    //   creates a temporary contract to force send the ETH via `SELFDESTRUCT`.
    //   Future compatible with `SENDALL`: https://eips.ethereum.org/EIPS/eip-4758.
    // - Reverts if the current contract has insufficient balance.
    //
    // The try variants:
    // - Forwards with a mandatory gas stipend.
    // - Instead of reverting, returns whether the transfer succeeded.

    /// @dev Sends `amount` (in wei) ETH to `to`.
    function safeTransferETH(address to, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(call(gas(), to, amount, codesize(), 0x00, codesize(), 0x00)) {
                mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
                revert(0x1c, 0x04)
            }
        }
    }

    /// @dev Sends all the ETH in the current contract to `to`.
    function safeTransferAllETH(address to) internal {
        /// @solidity memory-safe-assembly
        assembly {
            // Transfer all the ETH and check if it succeeded or not.
            if iszero(call(gas(), to, selfbalance(), codesize(), 0x00, codesize(), 0x00)) {
                mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
                revert(0x1c, 0x04)
            }
        }
    }

    /// @dev Force sends `amount` (in wei) ETH to `to`, with a `gasStipend`.
    function forceSafeTransferETH(address to, uint256 amount, uint256 gasStipend) internal {
        /// @solidity memory-safe-assembly
        assembly {
            if lt(selfbalance(), amount) {
                mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
                revert(0x1c, 0x04)
            }
            if iszero(call(gasStipend, to, amount, codesize(), 0x00, codesize(), 0x00)) {
                mstore(0x00, to) // Store the address in scratch space.
                mstore8(0x0b, 0x73) // Opcode `PUSH20`.
                mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
                if iszero(create(amount, 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
            }
        }
    }

    /// @dev Force sends all the ETH in the current contract to `to`, with a `gasStipend`.
    function forceSafeTransferAllETH(address to, uint256 gasStipend) internal {
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(call(gasStipend, to, selfbalance(), codesize(), 0x00, codesize(), 0x00)) {
                mstore(0x00, to) // Store the address in scratch space.
                mstore8(0x0b, 0x73) // Opcode `PUSH20`.
                mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
                if iszero(create(selfbalance(), 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
            }
        }
    }

    /// @dev Force sends `amount` (in wei) ETH to `to`, with `GAS_STIPEND_NO_GRIEF`.
    function forceSafeTransferETH(address to, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            if lt(selfbalance(), amount) {
                mstore(0x00, 0xb12d13eb) // `ETHTransferFailed()`.
                revert(0x1c, 0x04)
            }
            if iszero(call(GAS_STIPEND_NO_GRIEF, to, amount, codesize(), 0x00, codesize(), 0x00)) {
                mstore(0x00, to) // Store the address in scratch space.
                mstore8(0x0b, 0x73) // Opcode `PUSH20`.
                mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
                if iszero(create(amount, 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
            }
        }
    }

    /// @dev Force sends all the ETH in the current contract to `to`, with `GAS_STIPEND_NO_GRIEF`.
    function forceSafeTransferAllETH(address to) internal {
        /// @solidity memory-safe-assembly
        assembly {
            // forgefmt: disable-next-item
            if iszero(call(GAS_STIPEND_NO_GRIEF, to, selfbalance(), codesize(), 0x00, codesize(), 0x00)) {
                mstore(0x00, to) // Store the address in scratch space.
                mstore8(0x0b, 0x73) // Opcode `PUSH20`.
                mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
                if iszero(create(selfbalance(), 0x0b, 0x16)) { revert(codesize(), codesize()) } // For gas estimation.
            }
        }
    }

    /// @dev Sends `amount` (in wei) ETH to `to`, with a `gasStipend`.
    function trySafeTransferETH(address to, uint256 amount, uint256 gasStipend)
        internal
        returns (bool success)
    {
        /// @solidity memory-safe-assembly
        assembly {
            success := call(gasStipend, to, amount, codesize(), 0x00, codesize(), 0x00)
        }
    }

    /// @dev Sends all the ETH in the current contract to `to`, with a `gasStipend`.
    function trySafeTransferAllETH(address to, uint256 gasStipend)
        internal
        returns (bool success)
    {
        /// @solidity memory-safe-assembly
        assembly {
            success := call(gasStipend, to, selfbalance(), codesize(), 0x00, codesize(), 0x00)
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                      ERC20 OPERATIONS                      */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Sends `amount` of ERC20 `token` from `from` to `to`.
    /// Reverts upon failure.
    ///
    /// The `from` account must have at least `amount` approved for
    /// the current contract to manage.
    function safeTransferFrom(address token, address from, address to, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            let m := mload(0x40) // Cache the free memory pointer.
            mstore(0x60, amount) // Store the `amount` argument.
            mstore(0x40, to) // Store the `to` argument.
            mstore(0x2c, shl(96, from)) // Store the `from` argument.
            mstore(0x0c, 0x23b872dd000000000000000000000000) // `transferFrom(address,address,uint256)`.
            // Perform the transfer, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x1c, 0x64, 0x00, 0x20)
                )
            ) {
                mstore(0x00, 0x7939f424) // `TransferFromFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x60, 0) // Restore the zero slot to zero.
            mstore(0x40, m) // Restore the free memory pointer.
        }
    }

    /// @dev Sends `amount` of ERC20 `token` from `from` to `to`.
    ///
    /// The `from` account must have at least `amount` approved for the current contract to manage.
    function trySafeTransferFrom(address token, address from, address to, uint256 amount)
        internal
        returns (bool success)
    {
        /// @solidity memory-safe-assembly
        assembly {
            let m := mload(0x40) // Cache the free memory pointer.
            mstore(0x60, amount) // Store the `amount` argument.
            mstore(0x40, to) // Store the `to` argument.
            mstore(0x2c, shl(96, from)) // Store the `from` argument.
            mstore(0x0c, 0x23b872dd000000000000000000000000) // `transferFrom(address,address,uint256)`.
            success :=
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x1c, 0x64, 0x00, 0x20)
                )
            mstore(0x60, 0) // Restore the zero slot to zero.
            mstore(0x40, m) // Restore the free memory pointer.
        }
    }

    /// @dev Sends all of ERC20 `token` from `from` to `to`.
    /// Reverts upon failure.
    ///
    /// The `from` account must have their entire balance approved for the current contract to manage.
    function safeTransferAllFrom(address token, address from, address to)
        internal
        returns (uint256 amount)
    {
        /// @solidity memory-safe-assembly
        assembly {
            let m := mload(0x40) // Cache the free memory pointer.
            mstore(0x40, to) // Store the `to` argument.
            mstore(0x2c, shl(96, from)) // Store the `from` argument.
            mstore(0x0c, 0x70a08231000000000000000000000000) // `balanceOf(address)`.
            // Read the balance, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    gt(returndatasize(), 0x1f), // At least 32 bytes returned.
                    staticcall(gas(), token, 0x1c, 0x24, 0x60, 0x20)
                )
            ) {
                mstore(0x00, 0x7939f424) // `TransferFromFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x00, 0x23b872dd) // `transferFrom(address,address,uint256)`.
            amount := mload(0x60) // The `amount` is already at 0x60. We'll need to return it.
            // Perform the transfer, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x1c, 0x64, 0x00, 0x20)
                )
            ) {
                mstore(0x00, 0x7939f424) // `TransferFromFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x60, 0) // Restore the zero slot to zero.
            mstore(0x40, m) // Restore the free memory pointer.
        }
    }

    /// @dev Sends `amount` of ERC20 `token` from the current contract to `to`.
    /// Reverts upon failure.
    function safeTransfer(address token, address to, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x14, to) // Store the `to` argument.
            mstore(0x34, amount) // Store the `amount` argument.
            mstore(0x00, 0xa9059cbb000000000000000000000000) // `transfer(address,uint256)`.
            // Perform the transfer, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
                )
            ) {
                mstore(0x00, 0x90b8ec18) // `TransferFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
        }
    }

    /// @dev Sends all of ERC20 `token` from the current contract to `to`.
    /// Reverts upon failure.
    function safeTransferAll(address token, address to) internal returns (uint256 amount) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, 0x70a08231) // Store the function selector of `balanceOf(address)`.
            mstore(0x20, address()) // Store the address of the current contract.
            // Read the balance, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    gt(returndatasize(), 0x1f), // At least 32 bytes returned.
                    staticcall(gas(), token, 0x1c, 0x24, 0x34, 0x20)
                )
            ) {
                mstore(0x00, 0x90b8ec18) // `TransferFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x14, to) // Store the `to` argument.
            amount := mload(0x34) // The `amount` is already at 0x34. We'll need to return it.
            mstore(0x00, 0xa9059cbb000000000000000000000000) // `transfer(address,uint256)`.
            // Perform the transfer, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
                )
            ) {
                mstore(0x00, 0x90b8ec18) // `TransferFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
        }
    }

    /// @dev Sets `amount` of ERC20 `token` for `to` to manage on behalf of the current contract.
    /// Reverts upon failure.
    function safeApprove(address token, address to, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x14, to) // Store the `to` argument.
            mstore(0x34, amount) // Store the `amount` argument.
            mstore(0x00, 0x095ea7b3000000000000000000000000) // `approve(address,uint256)`.
            // Perform the approval, reverting upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
                )
            ) {
                mstore(0x00, 0x3e3f8f73) // `ApproveFailed()`.
                revert(0x1c, 0x04)
            }
            mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
        }
    }

    /// @dev Sets `amount` of ERC20 `token` for `to` to manage on behalf of the current contract.
    /// If the initial attempt to approve fails, attempts to reset the approved amount to zero,
    /// then retries the approval again (some tokens, e.g. USDT, requires this).
    /// Reverts upon failure.
    function safeApproveWithRetry(address token, address to, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x14, to) // Store the `to` argument.
            mstore(0x34, amount) // Store the `amount` argument.
            mstore(0x00, 0x095ea7b3000000000000000000000000) // `approve(address,uint256)`.
            // Perform the approval, retrying upon failure.
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                    call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
                )
            ) {
                mstore(0x34, 0) // Store 0 for the `amount`.
                mstore(0x00, 0x095ea7b3000000000000000000000000) // `approve(address,uint256)`.
                pop(call(gas(), token, 0, 0x10, 0x44, codesize(), 0x00)) // Reset the approval.
                mstore(0x34, amount) // Store back the original `amount`.
                // Retry the approval, reverting upon failure.
                if iszero(
                    and(
                        or(eq(mload(0x00), 1), iszero(returndatasize())), // Returned 1 or nothing.
                        call(gas(), token, 0, 0x10, 0x44, 0x00, 0x20)
                    )
                ) {
                    mstore(0x00, 0x3e3f8f73) // `ApproveFailed()`.
                    revert(0x1c, 0x04)
                }
            }
            mstore(0x34, 0) // Restore the part of the free memory pointer that was overwritten.
        }
    }

    /// @dev Returns the amount of ERC20 `token` owned by `account`.
    /// Returns zero if the `token` does not exist.
    function balanceOf(address token, address account) internal view returns (uint256 amount) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x14, account) // Store the `account` argument.
            mstore(0x00, 0x70a08231000000000000000000000000) // `balanceOf(address)`.
            amount :=
                mul( // The arguments of `mul` are evaluated from right to left.
                    mload(0x20),
                    and( // The arguments of `and` are evaluated from right to left.
                        gt(returndatasize(), 0x1f), // At least 32 bytes returned.
                        staticcall(gas(), token, 0x10, 0x24, 0x20, 0x20)
                    )
                )
        }
    }

    /// @dev Sends `amount` of ERC20 `token` from `from` to `to`.
    /// If the initial attempt fails, try to use Permit2 to transfer the token.
    /// Reverts upon failure.
    ///
    /// The `from` account must have at least `amount` approved for the current contract to manage.
    function safeTransferFrom2(address token, address from, address to, uint256 amount) internal {
        if (!trySafeTransferFrom(token, from, to, amount)) {
            permit2TransferFrom(token, from, to, amount);
        }
    }

    /// @dev Sends `amount` of ERC20 `token` from `from` to `to` via Permit2.
    /// Reverts upon failure.
    function permit2TransferFrom(address token, address from, address to, uint256 amount)
        internal
    {
        /// @solidity memory-safe-assembly
        assembly {
            let m := mload(0x40)
            mstore(add(m, 0x74), shr(96, shl(96, token)))
            mstore(add(m, 0x54), amount)
            mstore(add(m, 0x34), to)
            mstore(add(m, 0x20), shl(96, from))
            // `transferFrom(address,address,uint160,address)`.
            mstore(m, 0x36c78516000000000000000000000000)
            let p := PERMIT2
            let exists := eq(chainid(), 1)
            if iszero(exists) { exists := iszero(iszero(extcodesize(p))) }
            if iszero(and(call(gas(), p, 0, add(m, 0x10), 0x84, codesize(), 0x00), exists)) {
                mstore(0x00, 0x7939f4248757f0fd) // `TransferFromFailed()` or `Permit2AmountOverflow()`.
                revert(add(0x18, shl(2, iszero(iszero(shr(160, amount))))), 0x04)
            }
        }
    }

    /// @dev Permit a user to spend a given amount of
    /// another user's tokens via native EIP-2612 permit if possible, falling
    /// back to Permit2 if native permit fails or is not implemented on the token.
    function permit2(
        address token,
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        bool success;
        /// @solidity memory-safe-assembly
        assembly {
            for {} shl(96, xor(token, WETH9)) {} {
                mstore(0x00, 0x3644e515) // `DOMAIN_SEPARATOR()`.
                if iszero(
                    and( // The arguments of `and` are evaluated from right to left.
                        lt(iszero(mload(0x00)), eq(returndatasize(), 0x20)), // Returns 1 non-zero word.
                        // Gas stipend to limit gas burn for tokens that don't refund gas when
                        // an non-existing function is called. 5K should be enough for a SLOAD.
                        staticcall(5000, token, 0x1c, 0x04, 0x00, 0x20)
                    )
                ) { break }
                // After here, we can be sure that token is a contract.
                let m := mload(0x40)
                mstore(add(m, 0x34), spender)
                mstore(add(m, 0x20), shl(96, owner))
                mstore(add(m, 0x74), deadline)
                if eq(mload(0x00), DAI_DOMAIN_SEPARATOR) {
                    mstore(0x14, owner)
                    mstore(0x00, 0x7ecebe00000000000000000000000000) // `nonces(address)`.
                    mstore(add(m, 0x94), staticcall(gas(), token, 0x10, 0x24, add(m, 0x54), 0x20))
                    mstore(m, 0x8fcbaf0c000000000000000000000000) // `IDAIPermit.permit`.
                    // `nonces` is already at `add(m, 0x54)`.
                    // `1` is already stored at `add(m, 0x94)`.
                    mstore(add(m, 0xb4), and(0xff, v))
                    mstore(add(m, 0xd4), r)
                    mstore(add(m, 0xf4), s)
                    success := call(gas(), token, 0, add(m, 0x10), 0x104, codesize(), 0x00)
                    break
                }
                mstore(m, 0xd505accf000000000000000000000000) // `IERC20Permit.permit`.
                mstore(add(m, 0x54), amount)
                mstore(add(m, 0x94), and(0xff, v))
                mstore(add(m, 0xb4), r)
                mstore(add(m, 0xd4), s)
                success := call(gas(), token, 0, add(m, 0x10), 0xe4, codesize(), 0x00)
                break
            }
        }
        if (!success) simplePermit2(token, owner, spender, amount, deadline, v, r, s);
    }

    /// @dev Simple permit on the Permit2 contract.
    function simplePermit2(
        address token,
        address owner,
        address spender,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        /// @solidity memory-safe-assembly
        assembly {
            let m := mload(0x40)
            mstore(m, 0x927da105) // `allowance(address,address,address)`.
            {
                let addressMask := shr(96, not(0))
                mstore(add(m, 0x20), and(addressMask, owner))
                mstore(add(m, 0x40), and(addressMask, token))
                mstore(add(m, 0x60), and(addressMask, spender))
                mstore(add(m, 0xc0), and(addressMask, spender))
            }
            let p := mul(PERMIT2, iszero(shr(160, amount)))
            if iszero(
                and( // The arguments of `and` are evaluated from right to left.
                    gt(returndatasize(), 0x5f), // Returns 3 words: `amount`, `expiration`, `nonce`.
                    staticcall(gas(), p, add(m, 0x1c), 0x64, add(m, 0x60), 0x60)
                )
            ) {
                mstore(0x00, 0x6b836e6b8757f0fd) // `Permit2Failed()` or `Permit2AmountOverflow()`.
                revert(add(0x18, shl(2, iszero(p))), 0x04)
            }
            mstore(m, 0x2b67b570) // `Permit2.permit` (PermitSingle variant).
            // `owner` is already `add(m, 0x20)`.
            // `token` is already at `add(m, 0x40)`.
            mstore(add(m, 0x60), amount)
            mstore(add(m, 0x80), 0xffffffffffff) // `expiration = type(uint48).max`.
            // `nonce` is already at `add(m, 0xa0)`.
            // `spender` is already at `add(m, 0xc0)`.
            mstore(add(m, 0xe0), deadline)
            mstore(add(m, 0x100), 0x100) // `signature` offset.
            mstore(add(m, 0x120), 0x41) // `signature` length.
            mstore(add(m, 0x140), r)
            mstore(add(m, 0x160), s)
            mstore(add(m, 0x180), shl(248, v))
            if iszero(call(gas(), p, 0, add(m, 0x1c), 0x184, codesize(), 0x00)) {
                mstore(0x00, 0x6b836e6b) // `Permit2Failed()`.
                revert(0x1c, 0x04)
            }
        }
    }
}

// src/Libraries/LibAllowList.sol

/// @custom:version 1.0.0

/// @title Lib Allow List
/// @author LI.FI (https://li.fi)
/// @notice Library for managing and accessing the conract address allow list
library LibAllowList {
    /// Storage ///
    bytes32 internal constant NAMESPACE =
        keccak256("com.lifi.library.allow.list");

    struct AllowListStorage {
        mapping(address => bool) allowlist;
        mapping(bytes4 => bool) selectorAllowList;
        address[] contracts;
    }

    /// @dev Adds a contract address to the allow list
    /// @param _contract the contract address to add
    function addAllowedContract(address _contract) internal {
        _checkAddress(_contract);

        AllowListStorage storage als = _getStorage();

        if (als.allowlist[_contract]) return;

        als.allowlist[_contract] = true;
        als.contracts.push(_contract);
    }

    /// @dev Checks whether a contract address has been added to the allow list
    /// @param _contract the contract address to check
    function contractIsAllowed(
        address _contract
    ) internal view returns (bool) {
        return _getStorage().allowlist[_contract];
    }

    /// @dev Remove a contract address from the allow list
    /// @param _contract the contract address to remove
    function removeAllowedContract(address _contract) internal {
        AllowListStorage storage als = _getStorage();

        if (!als.allowlist[_contract]) {
            return;
        }

        als.allowlist[_contract] = false;

        uint256 length = als.contracts.length;
        // Find the contract in the list
        for (uint256 i = 0; i < length; i++) {
            if (als.contracts[i] == _contract) {
                // Move the last element into the place to delete
                als.contracts[i] = als.contracts[length - 1];
                // Remove the last element
                als.contracts.pop();
                break;
            }
        }
    }

    /// @dev Fetch contract addresses from the allow list
    function getAllowedContracts() internal view returns (address[] memory) {
        return _getStorage().contracts;
    }

    /// @dev Add a selector to the allow list
    /// @param _selector the selector to add
    function addAllowedSelector(bytes4 _selector) internal {
        _getStorage().selectorAllowList[_selector] = true;
    }

    /// @dev Removes a selector from the allow list
    /// @param _selector the selector to remove
    function removeAllowedSelector(bytes4 _selector) internal {
        _getStorage().selectorAllowList[_selector] = false;
    }

    /// @dev Returns if selector has been added to the allow list
    /// @param _selector the selector to check
    function selectorIsAllowed(bytes4 _selector) internal view returns (bool) {
        return _getStorage().selectorAllowList[_selector];
    }

    /// @dev Fetch local storage struct
    function _getStorage()
        internal
        pure
        returns (AllowListStorage storage als)
    {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            als.slot := position
        }
    }

    /// @dev Contains business logic for validating a contract address.
    /// @param _contract address of the dex to check
    function _checkAddress(address _contract) private view {
        if (_contract == address(0)) revert InvalidContract();

        if (_contract.code.length == 0) revert InvalidContract();
    }
}

// src/Libraries/LibUtil.sol

/// @custom:version 1.0.0

library LibUtil {
    using LibBytes for bytes;

    function getRevertMsg(
        bytes memory _res
    ) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }

    /// @notice Determines whether the given address is the zero address
    /// @param addr The address to verify
    /// @return Boolean indicating if the address is the zero address
    function isZeroAddress(address addr) internal pure returns (bool) {
        return addr == address(0);
    }

    function revertWith(bytes memory data) internal pure {
        assembly {
            let dataSize := mload(data) // Load the size of the data
            let dataPtr := add(data, 0x20) // Advance data pointer to the next word
            revert(dataPtr, dataSize) // Revert with the given data
        }
    }
}

// lib/solmate/src/utils/SafeTransferLib.sol

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib_1 {
    /*//////////////////////////////////////////////////////////////
                             ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*//////////////////////////////////////////////////////////////
                            ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
            mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}

// src/Libraries/LibAsset.sol

/// @title LibAsset
/// @custom:version 2.0.0
/// @notice This library contains helpers for dealing with onchain transfers
///         of assets, including accounting for the native asset `assetId`
///         conventions and any noncompliant ERC20 transfers
library LibAsset {
    using SafeTransferLib_0 for address;
    using SafeTransferLib_0 for address payable;

    address internal constant NULL_ADDRESS = address(0);

    address internal constant NON_EVM_ADDRESS =
        0x11f111f111f111F111f111f111F111f111f111F1;

    /// @dev All native assets use the empty address for their asset id
    ///      by convention

    address internal constant NATIVE_ASSETID = NULL_ADDRESS;

    /// @dev EIP-7702 delegation designator prefix for Account Abstraction
    bytes3 internal constant DELEGATION_DESIGNATOR = 0xef0100;

    /// @notice Gets the balance of the inheriting contract for the given asset
    /// @param assetId The asset identifier to get the balance of
    /// @return Balance held by contracts using this library (returns 0 if assetId does not exist)
    function getOwnBalance(address assetId) internal view returns (uint256) {
        return
            isNativeAsset(assetId)
                ? address(this).balance
                : assetId.balanceOf(address(this));
    }

    /// @notice Wrapper function to transfer a given asset (native or erc20) to
    ///         some recipient. Should handle all non-compliant return value
    ///         tokens as well by using the SafeERC20 contract by open zeppelin.
    /// @param assetId Asset id for transfer (address(0) for native asset,
    ///                token address for erc20s)
    /// @param recipient Address to send asset to
    /// @param amount Amount to send to given recipient
    function transferAsset(
        address assetId,
        address payable recipient,
        uint256 amount
    ) internal {
        if (isNativeAsset(assetId)) {
            transferNativeAsset(recipient, amount);
        } else {
            transferERC20(assetId, recipient, amount);
        }
    }

    /// @notice Transfers ether from the inheriting contract to a given
    ///         recipient
    /// @param recipient Address to send ether to
    /// @param amount Amount to send to given recipient
    function transferNativeAsset(
        address payable recipient,
        uint256 amount
    ) private {
        // make sure a meaningful receiver address was provided
        if (recipient == NULL_ADDRESS) revert InvalidReceiver();

        // transfer native asset (will revert if target reverts or contract has insufficient balance)
        recipient.safeTransferETH(amount);
    }

    /// @notice Transfers tokens from the inheriting contract to a given recipient
    /// @param assetId Token address to transfer
    /// @param recipient Address to send tokens to
    /// @param amount Amount to send to given recipient
    function transferERC20(
        address assetId,
        address recipient,
        uint256 amount
    ) private {
        // make sure a meaningful receiver address was provided
        if (recipient == NULL_ADDRESS) {
            revert InvalidReceiver();
        }

        // transfer ERC20 assets (will revert if target reverts or contract has insufficient balance)
        assetId.safeTransfer(recipient, amount);
    }

    /// @notice Transfers tokens from a sender to a given recipient
    /// @param assetId Token address to transfer
    /// @param from Address of sender/owner
    /// @param recipient Address of recipient/spender
    /// @param amount Amount to transfer from owner to spender
    function transferFromERC20(
        address assetId,
        address from,
        address recipient,
        uint256 amount
    ) internal {
        // check if native asset
        if (isNativeAsset(assetId)) {
            revert NullAddrIsNotAnERC20Token();
        }

        // make sure a meaningful receiver address was provided
        if (recipient == NULL_ADDRESS) {
            revert InvalidReceiver();
        }

        // transfer ERC20 assets (will revert if target reverts or contract has insufficient balance)
        assetId.safeTransferFrom(from, recipient, amount);
    }

    /// @notice Pulls tokens from msg.sender
    /// @param assetId Token address to transfer
    /// @param amount Amount to transfer from owner
    function depositAsset(address assetId, uint256 amount) internal {
        // make sure a meaningful amount was provided
        if (amount == 0) revert InvalidAmount();

        // check if native asset
        if (isNativeAsset(assetId)) {
            // ensure msg.value is equal or greater than amount
            if (msg.value < amount) revert InvalidAmount();
        } else {
            // transfer ERC20 assets (will revert if target reverts or contract has insufficient balance)
            assetId.safeTransferFrom(msg.sender, address(this), amount);
        }
    }

    function depositAssets(LibSwap.SwapData[] calldata swaps) internal {
        for (uint256 i = 0; i < swaps.length; ) {
            LibSwap.SwapData calldata swap = swaps[i];
            if (swap.requiresDeposit) {
                depositAsset(swap.sendingAssetId, swap.fromAmount);
            }
            unchecked {
                i++;
            }
        }
    }

    /// @notice If the current allowance is insufficient, the allowance for a given spender
    ///         is set to MAX_UINT.
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param amount allowance amount required for current transaction
    function maxApproveERC20(
        IERC20 assetId,
        address spender,
        uint256 amount
    ) internal {
        approveERC20(assetId, spender, amount, type(uint256).max);
    }

    /// @notice If the current allowance is insufficient, the allowance for a given spender
    ///         is set to the amount provided
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param requiredAllowance Allowance required for current transaction
    /// @param setAllowanceTo The amount the allowance should be set to if current allowance is insufficient
    function approveERC20(
        IERC20 assetId,
        address spender,
        uint256 requiredAllowance,
        uint256 setAllowanceTo
    ) internal {
        if (isNativeAsset(address(assetId))) {
            return;
        }

        // make sure a meaningful spender address was provided
        if (spender == NULL_ADDRESS) {
            revert NullAddrIsNotAValidSpender();
        }

        // check if allowance is sufficient, otherwise set allowance to provided amount
        // If the initial attempt to approve fails, attempts to reset the approved amount to zero,
        // then retries the approval again (some tokens, e.g. USDT, requires this).
        // Reverts upon failure
        if (assetId.allowance(address(this), spender) < requiredAllowance) {
            address(assetId).safeApproveWithRetry(spender, setAllowanceTo);
        }
    }

    /// @notice Determines whether the given assetId is the native asset
    /// @param assetId The asset identifier to evaluate
    /// @return Boolean indicating if the asset is the native asset
    function isNativeAsset(address assetId) internal pure returns (bool) {
        return assetId == NATIVE_ASSETID;
    }

    /// @notice Checks if the given address is a contract (including EIP‑7702 AA‑wallets)
    ///         Returns true for any account with runtime code or with the 0xef0100 prefix (EIP‑7702).
    ///         Limitations:
    ///         - Still returns false during construction phase of a contract
    ///         - Cannot distinguish between EOA and self-destructed contract
    /// @param account The address to be checked
    function isContract(address account) internal view returns (bool) {
        bytes memory code = new bytes(23); // 3 bytes prefix + 20 bytes address

        assembly {
            extcodecopy(account, add(code, 0x20), 0, 23)
        }

        // Check for delegation designator prefix
        bytes3 prefix;
        assembly {
            prefix := mload(add(code, 32))
        }

        if (prefix == DELEGATION_DESIGNATOR) {
            // Extract delegate address (next 20 bytes)
            address delegateAddr;
            assembly {
                delegateAddr := mload(add(add(code, 0x20), 3))
                delegateAddr := shr(96, delegateAddr)
            }

            // Only check first level of delegation
            uint256 delegateSize;
            assembly {
                delegateSize := extcodesize(delegateAddr)
            }
            return delegateSize > 0;
        }

        // If not delegated, check if it's a regular contract
        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }
}

// src/Libraries/LibSwap.sol

/// @title LibSwap
/// @custom:version 1.1.0
/// @notice This library contains functionality to execute mostly swaps but also
///         other calls such as fee collection, token wrapping/unwrapping or
///         sending gas to destination chain
library LibSwap {
    /// @notice Struct containing all necessary data to execute a swap or generic call
    /// @param callTo The address of the contract to call for executing the swap
    /// @param approveTo The address that will receive token approval (can be different than callTo for some DEXs)
    /// @param sendingAssetId The address of the token being sent
    /// @param receivingAssetId The address of the token expected to be received
    /// @param fromAmount The exact amount of the sending asset to be used in the call
    /// @param callData Encoded function call data to be sent to the `callTo` contract
    /// @param requiresDeposit A flag indicating whether the tokens must be deposited (pulled) before the call
    struct SwapData {
        address callTo;
        address approveTo;
        address sendingAssetId;
        address receivingAssetId;
        uint256 fromAmount;
        bytes callData;
        bool requiresDeposit;
    }

    /// @notice Emitted after a successful asset swap or related operation
    /// @param transactionId    The unique identifier associated with the swap operation
    /// @param dex              The address of the DEX or contract that handled the swap
    /// @param fromAssetId      The address of the token that was sent
    /// @param toAssetId        The address of the token that was received
    /// @param fromAmount       The amount of `fromAssetId` sent
    /// @param toAmount         The amount of `toAssetId` received
    /// @param timestamp        The timestamp when the swap was executed
    event AssetSwapped(
        bytes32 transactionId,
        address dex,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount,
        uint256 timestamp
    );

    function swap(bytes32 transactionId, SwapData calldata _swap) internal {
        // make sure callTo is a contract
        if (!LibAsset.isContract(_swap.callTo)) revert InvalidContract();

        // make sure that fromAmount is not 0
        uint256 fromAmount = _swap.fromAmount;
        if (fromAmount == 0) revert NoSwapFromZeroBalance();

        // determine how much native value to send with the swap call
        uint256 nativeValue = LibAsset.isNativeAsset(_swap.sendingAssetId)
            ? _swap.fromAmount
            : 0;

        // store initial balance (required for event emission)
        uint256 initialReceivingAssetBalance = LibAsset.getOwnBalance(
            _swap.receivingAssetId
        );

        // max approve (if ERC20)
        if (nativeValue == 0) {
            LibAsset.maxApproveERC20(
                IERC20(_swap.sendingAssetId),
                _swap.approveTo,
                _swap.fromAmount
            );
        }

        // we used to have a sending asset balance check here (initialSendingAssetBalance >= _swap.fromAmount)
        // this check was removed to allow for more flexibility with rebasing/fee-taking tokens
        // the general assumption is that if not enough tokens are available to execute the calldata, the transaction will fail anyway
        // the error message might not be as explicit though

        // execute the swap
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = _swap.callTo.call{
            value: nativeValue
        }(_swap.callData);
        if (!success) {
            LibUtil.revertWith(res);
        }

        // get post-swap balance
        uint256 newBalance = LibAsset.getOwnBalance(_swap.receivingAssetId);

        // emit event
        emit AssetSwapped(
            transactionId,
            _swap.callTo,
            _swap.sendingAssetId,
            _swap.receivingAssetId,
            _swap.fromAmount,
            newBalance > initialReceivingAssetBalance
                ? newBalance - initialReceivingAssetBalance
                : newBalance,
            block.timestamp
        );
    }
}

// src/Facets/GenericSwapFacetV3.sol

/// @title GenericSwapFacetV3
/// @author LI.FI (https://li.fi)
/// @notice Provides gas-optimized functionality for fee collection and for swapping through any APPROVED DEX
/// @dev Can only execute calldata for APPROVED function selectors
/// @custom:version 1.0.2
contract GenericSwapFacetV3 is ILiFi {
    using SafeTransferLib_1 for ERC20;

    /// Storage
    address public immutable NATIVE_ADDRESS;

    /// Constructor
    /// @param _nativeAddress the address of the native token for this network
    constructor(address _nativeAddress) {
        NATIVE_ADDRESS = _nativeAddress;
    }

    /// External Methods ///

    // SINGLE SWAPS

    /// @notice Performs a single swap from an ERC20 token to another ERC20 token
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensSingleV3ERC20ToERC20(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData calldata _swapData
    ) external {
        _depositAndSwapERC20Single(_swapData, _receiver);

        address receivingAssetId = _swapData.receivingAssetId;
        address sendingAssetId = _swapData.sendingAssetId;

        // get contract's balance (which will be sent in full to user)
        uint256 amountReceived = ERC20(receivingAssetId).balanceOf(
            address(this)
        );

        // ensure that minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        ERC20(receivingAssetId).safeTransfer(_receiver, amountReceived);

        // emit events (both required for tracking)
        uint256 fromAmount = _swapData.fromAmount;
        emit LibSwap.AssetSwapped(
            _transactionId,
            _swapData.callTo,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived,
            block.timestamp
        );

        emit ILiFi.LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived
        );
    }

    /// @notice Performs a single swap from an ERC20 token to the network's native token
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensSingleV3ERC20ToNative(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData calldata _swapData
    ) external {
        _depositAndSwapERC20Single(_swapData, _receiver);

        // get contract's balance (which will be sent in full to user)
        uint256 amountReceived = address(this).balance;

        // ensure that minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = _receiver.call{ value: amountReceived }("");
        if (!success) revert NativeAssetTransferFailed();

        // emit events (both required for tracking)
        address sendingAssetId = _swapData.sendingAssetId;
        uint256 fromAmount = _swapData.fromAmount;
        emit LibSwap.AssetSwapped(
            _transactionId,
            _swapData.callTo,
            sendingAssetId,
            NATIVE_ADDRESS,
            fromAmount,
            amountReceived,
            block.timestamp
        );

        emit ILiFi.LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            sendingAssetId,
            NATIVE_ADDRESS,
            fromAmount,
            amountReceived
        );
    }

    /// @notice Performs a single swap from the network's native token to ERC20 token
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensSingleV3NativeToERC20(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData calldata _swapData
    ) external payable {
        address callTo = _swapData.callTo;
        // ensure that contract (callTo) and function selector are whitelisted
        if (
            !(LibAllowList.contractIsAllowed(callTo) &&
                LibAllowList.selectorIsAllowed(bytes4(_swapData.callData[:4])))
        ) revert ContractCallNotAllowed();

        // execute swap
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = callTo.call{ value: msg.value }(
            _swapData.callData
        );
        if (!success) {
            LibUtil.revertWith(res);
        }

        _returnPositiveSlippageNative(_receiver);

        // get contract's balance (which will be sent in full to user)
        address receivingAssetId = _swapData.receivingAssetId;
        uint256 amountReceived = ERC20(receivingAssetId).balanceOf(
            address(this)
        );

        // ensure that minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        ERC20(receivingAssetId).safeTransfer(_receiver, amountReceived);

        // emit events (both required for tracking)
        uint256 fromAmount = _swapData.fromAmount;
        emit LibSwap.AssetSwapped(
            _transactionId,
            callTo,
            NATIVE_ADDRESS,
            receivingAssetId,
            fromAmount,
            amountReceived,
            block.timestamp
        );

        emit ILiFi.LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            NATIVE_ADDRESS,
            receivingAssetId,
            fromAmount,
            amountReceived
        );
    }

    // MULTIPLE SWAPS

    /// @notice Performs multiple swaps in one transaction, starting with ERC20 and ending with native
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensMultipleV3ERC20ToNative(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData[] calldata _swapData
    ) external {
        _depositMultipleERC20Tokens(_swapData);
        _executeSwaps(_swapData, _transactionId, _receiver);
        _transferNativeTokensAndEmitEvent(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            _minAmountOut,
            _swapData
        );
    }

    /// @notice Performs multiple swaps in one transaction, starting with ERC20 and ending with ERC20
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensMultipleV3ERC20ToERC20(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData[] calldata _swapData
    ) external {
        _depositMultipleERC20Tokens(_swapData);
        _executeSwaps(_swapData, _transactionId, _receiver);
        _transferERC20TokensAndEmitEvent(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            _minAmountOut,
            _swapData
        );
    }

    /// @notice Performs multiple swaps in one transaction, starting with native and ending with ERC20
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensMultipleV3NativeToERC20(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData[] calldata _swapData
    ) external payable {
        _executeSwaps(_swapData, _transactionId, _receiver);
        _transferERC20TokensAndEmitEvent(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            _minAmountOut,
            _swapData
        );
    }

    /// Private helper methods ///
    function _depositMultipleERC20Tokens(
        LibSwap.SwapData[] calldata _swapData
    ) private {
        // initialize variables before loop to save gas
        uint256 numOfSwaps = _swapData.length;
        LibSwap.SwapData calldata currentSwap;

        // go through all swaps and deposit tokens, where required
        for (uint256 i = 0; i < numOfSwaps; ) {
            currentSwap = _swapData[i];
            if (currentSwap.requiresDeposit) {
                // we will not check msg.value as tx will fail anyway if not enough value available
                // thus we only deposit ERC20 tokens here
                ERC20(currentSwap.sendingAssetId).safeTransferFrom(
                    msg.sender,
                    address(this),
                    currentSwap.fromAmount
                );
            }
            unchecked {
                ++i;
            }
        }
    }

    function _depositAndSwapERC20Single(
        LibSwap.SwapData calldata _swapData,
        address _receiver
    ) private {
        ERC20 sendingAsset = ERC20(_swapData.sendingAssetId);
        uint256 fromAmount = _swapData.fromAmount;
        // deposit funds
        sendingAsset.safeTransferFrom(msg.sender, address(this), fromAmount);

        // ensure that contract (callTo) and function selector are whitelisted
        address callTo = _swapData.callTo;
        address approveTo = _swapData.approveTo;
        bytes calldata callData = _swapData.callData;
        if (
            !(LibAllowList.contractIsAllowed(callTo) &&
                LibAllowList.selectorIsAllowed(bytes4(callData[:4])))
        ) revert ContractCallNotAllowed();

        // ensure that approveTo address is also whitelisted if it differs from callTo
        if (approveTo != callTo && !LibAllowList.contractIsAllowed(approveTo))
            revert ContractCallNotAllowed();

        // check if the current allowance is sufficient
        uint256 currentAllowance = sendingAsset.allowance(
            address(this),
            approveTo
        );

        // check if existing allowance is sufficient
        if (currentAllowance < fromAmount) {
            // check if is non-zero, set to 0 if not
            if (currentAllowance != 0) sendingAsset.safeApprove(approveTo, 0);
            // set allowance to uint max to avoid future approvals
            sendingAsset.safeApprove(approveTo, type(uint256).max);
        }

        // execute swap
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = callTo.call(callData);
        if (!success) {
            LibUtil.revertWith(res);
        }

        _returnPositiveSlippageERC20(sendingAsset, _receiver);
    }

    // @dev: this function will not work with swapData that has multiple swaps with the same sendingAssetId
    //       as the _returnPositiveSlippage... functionality will refund all remaining tokens after the first swap
    //       We accept this fact since the use case is not common yet. As an alternative you can always use the
    //       "swapTokensGeneric" function of the original GenericSwapFacet
    function _executeSwaps(
        LibSwap.SwapData[] calldata _swapData,
        bytes32 _transactionId,
        address _receiver
    ) private {
        // initialize variables before loop to save gas
        uint256 numOfSwaps = _swapData.length;
        ERC20 sendingAsset;
        address sendingAssetId;
        address receivingAssetId;
        LibSwap.SwapData calldata currentSwap;
        bool success;
        bytes memory returnData;
        uint256 currentAllowance;

        // go through all swaps
        for (uint256 i = 0; i < numOfSwaps; ) {
            currentSwap = _swapData[i];
            sendingAssetId = currentSwap.sendingAssetId;
            sendingAsset = ERC20(currentSwap.sendingAssetId);
            receivingAssetId = currentSwap.receivingAssetId;

            // check if callTo address is whitelisted
            if (
                !LibAllowList.contractIsAllowed(currentSwap.callTo) ||
                !LibAllowList.selectorIsAllowed(
                    bytes4(currentSwap.callData[:4])
                )
            ) {
                revert ContractCallNotAllowed();
            }

            // if approveTo address is different to callTo, check if it's whitelisted, too
            if (
                currentSwap.approveTo != currentSwap.callTo &&
                !LibAllowList.contractIsAllowed(currentSwap.approveTo)
            ) {
                revert ContractCallNotAllowed();
            }

            if (LibAsset.isNativeAsset(sendingAssetId)) {
                // Native
                // execute the swap
                (success, returnData) = currentSwap.callTo.call{
                    value: currentSwap.fromAmount
                }(currentSwap.callData);
                if (!success) {
                    LibUtil.revertWith(returnData);
                }

                // return any potential leftover sendingAsset tokens
                // but only for swaps, not for fee collections (otherwise the whole amount would be returned before the actual swap)
                if (sendingAssetId != receivingAssetId)
                    _returnPositiveSlippageNative(_receiver);
            } else {
                // ERC20
                // check if the current allowance is sufficient
                currentAllowance = sendingAsset.allowance(
                    address(this),
                    currentSwap.approveTo
                );
                if (currentAllowance < currentSwap.fromAmount) {
                    sendingAsset.safeApprove(currentSwap.approveTo, 0);
                    sendingAsset.safeApprove(
                        currentSwap.approveTo,
                        type(uint256).max
                    );
                }

                // execute the swap
                (success, returnData) = currentSwap.callTo.call(
                    currentSwap.callData
                );
                if (!success) {
                    LibUtil.revertWith(returnData);
                }

                // return any potential leftover sendingAsset tokens
                // but only for swaps, not for fee collections (otherwise the whole amount would be returned before the actual swap)
                if (sendingAssetId != receivingAssetId)
                    _returnPositiveSlippageERC20(sendingAsset, _receiver);
            }

            // emit AssetSwapped event
            // @dev: this event might in some cases emit inaccurate information. e.g. if a token is swapped and this contract already held a balance of the receivingAsset
            //       then the event will show swapOutputAmount + existingBalance as toAmount. We accept this potential inaccuracy in return for gas savings and may update this
            //       at a later stage when the described use case becomes more common
            emit LibSwap.AssetSwapped(
                _transactionId,
                currentSwap.callTo,
                sendingAssetId,
                receivingAssetId,
                currentSwap.fromAmount,
                LibAsset.isNativeAsset(receivingAssetId)
                    ? address(this).balance
                    : ERC20(receivingAssetId).balanceOf(address(this)),
                block.timestamp
            );

            unchecked {
                ++i;
            }
        }
    }

    function _transferERC20TokensAndEmitEvent(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData[] calldata _swapData
    ) private {
        // determine the end result of the swap
        address finalAssetId = _swapData[_swapData.length - 1]
            .receivingAssetId;
        uint256 amountReceived = ERC20(finalAssetId).balanceOf(address(this));

        // make sure minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer to receiver
        ERC20(finalAssetId).safeTransfer(_receiver, amountReceived);

        // emit event
        emit ILiFi.LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            _swapData[0].sendingAssetId,
            finalAssetId,
            _swapData[0].fromAmount,
            amountReceived
        );
    }

    function _transferNativeTokensAndEmitEvent(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData[] calldata _swapData
    ) private {
        uint256 amountReceived = address(this).balance;

        // make sure minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = _receiver.call{ value: amountReceived }("");
        if (!success) {
            revert NativeAssetTransferFailed();
        }

        // emit event
        emit ILiFi.LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            _swapData[0].sendingAssetId,
            NATIVE_ADDRESS,
            _swapData[0].fromAmount,
            amountReceived
        );
    }

    // returns any unused 'sendingAsset' tokens (=> positive slippage) to the receiver address
    function _returnPositiveSlippageERC20(
        ERC20 sendingAsset,
        address receiver
    ) private {
        // if a balance exists in sendingAsset, it must be positive slippage
        if (address(sendingAsset) != NATIVE_ADDRESS) {
            uint256 sendingAssetBalance = sendingAsset.balanceOf(
                address(this)
            );

            // we decided to change this value from 0 to 1 to have more flexibility with rebasing tokens that
            // sometimes produce rounding errors. In those cases there might be 1 wei leftover at the end of a swap
            // but this 1 wei is not transferable, so the tx reverts. We accept that 1 wei dust gets stuck in the contract
            // with every tx as this does not represent a significant USD value in any relevant token.
            if (sendingAssetBalance > 1) {
                sendingAsset.safeTransfer(receiver, sendingAssetBalance);
            }
        }
    }

    // returns any unused native tokens (=> positive slippage) to the receiver address
    function _returnPositiveSlippageNative(address receiver) private {
        // if a native balance exists in sendingAsset, it must be positive slippage
        uint256 nativeBalance = address(this).balance;

        if (nativeBalance > 0) {
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, ) = receiver.call{ value: nativeBalance }("");
            if (!success) revert NativeAssetTransferFailed();
        }
    }
}