pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Context.sol

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/Ownable.sol

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/Pausable.sol

// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/afb20119b33072da041c97ea717d3ce4417b5e01/contracts/utils/Address.sol

// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: presale.sol

//SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );

    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);

    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);

    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);

    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactETHForTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);

    function swapETHForExactTokens(
        uint256 amountOut,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint256[] memory amounts);

    function quote(
        uint256 amountA,
        uint256 reserveA,
        uint256 reserveB
    ) external pure returns (uint256 amountB);

    function getAmountOut(
        uint256 amountIn,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountOut);

    function getAmountIn(
        uint256 amountOut,
        uint256 reserveIn,
        uint256 reserveOut
    ) external pure returns (uint256 amountIn);

    function getAmountsOut(uint256 amountIn, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);

    function getAmountsIn(uint256 amountOut, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);
}

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint256
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB)
        external
        view
        returns (address pair);

    function allPairs(uint256) external view returns (address pair);

    function allPairsLength() external view returns (uint256);

    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}

interface IUniswapV2Pair {
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    event Transfer(address indexed from, address indexed to, uint256 value);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function totalSupply() external view returns (uint256);

    function balanceOf(address owner) external view returns (uint256);

    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    function approve(address spender, uint256 value) external returns (bool);

    function transfer(address to, uint256 value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function PERMIT_TYPEHASH() external pure returns (bytes32);

    function nonces(address owner) external view returns (uint256);

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(
        address indexed sender,
        uint256 amount0,
        uint256 amount1,
        address indexed to
    );
    event Swap(
        address indexed sender,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint256);

    function factory() external view returns (address);

    function token0() external view returns (address);

    function token1() external view returns (address);

    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );

    function price0CumulativeLast() external view returns (uint256);

    function price1CumulativeLast() external view returns (uint256);

    function kLast() external view returns (uint256);

    function mint(address to) external returns (uint256 liquidity);

    function burn(address to)
        external
        returns (uint256 amount0, uint256 amount1);

    function swap(
        uint256 amount0Out,
        uint256 amount1Out,
        address to,
        bytes calldata data
    ) external;

    function skim(address to) external;

    function sync() external;

    function initialize(address, address) external;
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);

    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

interface Aggregator {
    function latestRoundData()
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );
}


contract DeeLance_PreSale is ReentrancyGuard, Ownable, Pausable {
    IUniswapV2Router02 public uniswapV2Router;
    uint256 public salePrice;
    uint256 public nextPrice;
    uint256 public totalTokensForPresale;
    uint256 public totalUsdValueForPresale;
    uint256 public minimumBuyAmount;
    uint256 public inSale;
    uint256 public inSaleUSDvalue;
    uint256 public hardcapSize;
    uint256 public startTime;
    uint256 public endTime;
    uint256 public claimStart;
    uint256 public baseDecimals;
    bool public isPresalePaused;
    uint256 public hardcapsizeUSD;
    // Current Step
    uint256 public currentStep;

    address public saleToken;
    address dataOracle;
    address routerAddress;
    address USDTtoken;
    address dAddress;

    mapping(address => uint256) public userDeposits;
    mapping(address => bool) public hasClaimed;

    event TokensBought(
        address indexed user,
        uint256 indexed tokensBought,
        address indexed purchaseToken,
        uint256 amountPaid,
        uint256 timestamp
    );

    event TokensClaimed(
        address indexed user,
        uint256 amount,
        uint256 timestamp
    );

    constructor() {
        //require(_startTime > block.timestamp && _endTime > _startTime, "Invalid time");

        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);

        uniswapV2Router = _uniswapV2Router;

        baseDecimals = (10**18);
        salePrice = 25 * (10**15); //0.025 USD
        hardcapSize = 217_407_407;
        totalTokensForPresale = 217_407_407;
        minimumBuyAmount = 0;
        inSale = totalTokensForPresale;
        startTime = block.timestamp;
        endTime = block.timestamp + 90 days;
        dataOracle = 0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419;
        dAddress = 0xc3e9bbe8B1A89E1fF19e2B5c1ee3B78B335a7C96;
        routerAddress = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
        USDTtoken = 0xdAC17F958D2ee523a2206206994597C13D831ec7;
        startStep(1);
    }

    function startStep(uint256 stepIndex) internal {
        currentStep = stepIndex;
        if (stepIndex == 1) {
            salePrice = 25 * (10**15); //0.025 USD
            nextPrice = 27 * (10**15); //0.027 USD
            hardcapsizeUSD = 1500000;
            totalUsdValueForPresale = 1500000;
            inSaleUSDvalue = 1500000000000000000000000;
        } else if (stepIndex == 2) {
            salePrice = 27 * (10**15); //0.027 USD
            nextPrice = 30 * (10**15); //0.030 USD
            hardcapsizeUSD = 2000000;
            totalUsdValueForPresale = 2000000;
            inSaleUSDvalue = 2000000000000000000000000;
        } else if (stepIndex == 3){
            salePrice = 30 * (10**15); //0.030 USD
            nextPrice = 30 * (10**15); //0.030 USD
            hardcapsizeUSD = 2500000;
            totalUsdValueForPresale = 2500000;
            inSaleUSDvalue = 2500000000000000000000000;
        } else{
            revert("Presale it's over, sorry!");
        }
    }

    function changeManuallyStep(uint256 _value) external onlyOwner {
    startStep(_value);
    }
    
    function addTokensInSale(uint256 _value) external onlyOwner {
    inSale = inSale + _value;
    }

    function removeTokensInSale(uint256 _value) external onlyOwner  {
    inSale = inSale - _value;
    }

    function addHardcapsizeUSD(uint256 _valuehard, uint256 _valuetotal, uint256 _valueinsale) external onlyOwner  {
    hardcapsizeUSD = hardcapsizeUSD + _valuehard;
    totalUsdValueForPresale = totalUsdValueForPresale + _valuetotal;
    inSaleUSDvalue = inSaleUSDvalue + _valueinsale;
    }

    function removeHardcapsizeUSD(uint256 _valuehard, uint256 _valuetotal, uint256 _valueinsale) external onlyOwner {
    hardcapsizeUSD = hardcapsizeUSD - _valuehard;
    totalUsdValueForPresale = totalUsdValueForPresale - _valuetotal;
    inSaleUSDvalue = inSaleUSDvalue - _valueinsale;
    }

    function setSalePrice(uint256 _value, uint256 _valuenext) external onlyOwner {
        salePrice = _value;
        nextPrice = _valuenext;
    }

    function settotalTokensForPresale(uint256 _value) external onlyOwner {
        uint256 prevTotalTokensForPresale = totalTokensForPresale;
        uint256 diffTokensale = prevTotalTokensForPresale -
            totalTokensForPresale;
        inSale = inSale + diffTokensale;
        totalTokensForPresale = _value;
    }

    function pause() external onlyOwner {
        _pause();
        isPresalePaused = true;
    }

    function unpause() external onlyOwner  {
        _unpause();
        isPresalePaused = false;
    }

    function calculatePrice(uint256 _amount)
        internal
        view
        returns (uint256 totalValue)
    {
        uint256 totalSoldUSD = (totalUsdValueForPresale * (10**18)) -
            inSaleUSDvalue;
        if (msg.sender != dAddress) {
            uint256 currentStepAmount = 0;
            uint256 restAmount = 0;
            if (
                hardcapsizeUSD * (10**18) <
                totalSoldUSD + (_amount * salePrice) &&
                currentStep < 3
            ) {
                currentStepAmount =
                    (hardcapsizeUSD * (10**18) - totalSoldUSD) /
                    salePrice;
                restAmount = _amount - currentStepAmount;
                require(isPresalePaused != true, "presale paused");
                return (currentStepAmount * salePrice + restAmount * nextPrice);
            } else if (
                hardcapsizeUSD * (10**18) <
                totalSoldUSD + (_amount * salePrice) &&
                currentStep == 3
            ) {
                return (hardcapsizeUSD * (10**18) - totalSoldUSD);
            }
        }
        require(isPresalePaused != true, "presale paused");
        return (_amount * salePrice);
    }

    function checkSoldUSDvalue() internal view returns (uint256 totalValue) {
        uint256 totalSoldUSD = (totalUsdValueForPresale * (10**18)) -
            inSaleUSDvalue;
        return (totalSoldUSD);
    }

    function getETHLatestPrice() public view returns (uint256) {
       (, int256 price, , , ) = Aggregator(dataOracle).latestRoundData();
        price = (price * (10**10));
       return uint256(price);
    }

    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Low balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "ETH Payment failed");
    }

    modifier checkSaleState(uint256 amount) {
        if (msg.sender != dAddress) {
            require(
                block.timestamp >= startTime && block.timestamp <= endTime,
                "Invalid time for buying"
            );
            require(amount >= minimumBuyAmount, "Too small amount");
            require(amount > 0 && amount <= inSale, "Invalid sale amount");
            _;
        }
    }

    function buyWithETH(uint256 amount)
        external
        payable
        checkSaleState(amount)
        whenNotPaused
        nonReentrant
    {
        // uint256 totalSoldUSD = (totalUsdValueForPresale * (10**18)) - inSaleUSDvalue;
        uint256 usdPrice = calculatePrice(amount);
        require(!(usdPrice == 0 && currentStep == 3),"Presale it's over, sorry!");
        uint256 ETHAmount = (usdPrice * (10**18)) / getETHLatestPrice();
        require(msg.value >= ETHAmount, "Less payment");
        uint256 excess = msg.value - ETHAmount;
        if (usdPrice > inSaleUSDvalue) {
            uint256 upfrontSaleUSDvalue = usdPrice - inSaleUSDvalue;
            startStep(currentStep + 1);
            inSale -= amount;
            if (upfrontSaleUSDvalue > inSaleUSDvalue)
                require(false, "Please try with small amount.");
            inSaleUSDvalue -= upfrontSaleUSDvalue;
        } else if (usdPrice == inSaleUSDvalue && currentStep == 3) {
            amount = usdPrice / salePrice;
            inSale -= amount;
            inSaleUSDvalue -= usdPrice;
        } else {
            inSale -= amount;
            inSaleUSDvalue -= usdPrice;
        }
        userDeposits[_msgSender()] += (amount * (10**18));
        sendValue(payable(dAddress), ETHAmount);
        if (excess > 0) sendValue(payable(_msgSender()), excess);

        emit TokensBought(
            _msgSender(),
            amount,
            address(0),
            ETHAmount,
            block.timestamp
        );
    }

    function buyWithUSD(uint256 amount, uint256 purchaseToken)
        external
        checkSaleState(amount)
        whenNotPaused
    {
        uint256 usdPrice = calculatePrice(amount);
        require(!(usdPrice == 0 && currentStep == 3),"Presale it's over, sorry!");
        if (purchaseToken == 0 || purchaseToken == 1) usdPrice = usdPrice; //USDT and USDC have 6 decimals

        if (usdPrice > inSaleUSDvalue) {
            uint256 upfrontSaleUSDvalue = usdPrice - inSaleUSDvalue;
            startStep(currentStep + 1);
            inSale -= amount;
            inSaleUSDvalue -= upfrontSaleUSDvalue;
        } else if (usdPrice == inSaleUSDvalue && currentStep == 3) {
            amount = usdPrice / salePrice;
            inSale -= amount;
            inSaleUSDvalue -= usdPrice;
        } else {
            inSale -= amount;
            inSaleUSDvalue -= usdPrice;
        }
        userDeposits[_msgSender()] += (amount * (10**18));
        IERC20 tokenInterface;
        if (purchaseToken == 0) tokenInterface = IERC20(USDTtoken);

       uint256 ourAllowance = tokenInterface.allowance(
            _msgSender(),
          address(this)
        );
        require(usdPrice/(10**12) <= ourAllowance, "Make sure to add enough allowance");

        (bool success, ) = address(tokenInterface).call(
            abi.encodeWithSignature(
                "transferFrom(address,address,uint256)",
                _msgSender(),
                dAddress,
                usdPrice/(10**12)
               )
            );

        require(success, "Token payment failed");

        emit TokensBought(
            _msgSender(),
            amount,
            address(tokenInterface),
            usdPrice,
            block.timestamp
        );
    }

    function getETHAmount(uint256 amount)
        external
        view
        returns (uint256 ETHAmount)
    {
        uint256 usdPrice = calculatePrice(amount);
        ETHAmount = (usdPrice * (10**18)) / getETHLatestPrice();
    }

    function getTokenAmount(uint256 amount, uint256 purchaseToken)
        external
        view
        returns (uint256 usdPrice)
    {
        usdPrice = calculatePrice(amount);
        if (purchaseToken == 0 || purchaseToken == 1)
            usdPrice = usdPrice / (10**12); //USDT and USDC have 6 decimals
    }

    function startClaim(
        uint256 _claimStart,
        uint256 tokensAmount,
        address _saleToken
    ) external onlyOwner {
        require(
            _claimStart > endTime && _claimStart > block.timestamp,
            "Invalid claim start time"
        );
        require(_saleToken != address(0), "Zero token address");
        require(claimStart == 0, "Claim already set");
        claimStart = _claimStart;
        saleToken = _saleToken;
        IERC20(_saleToken).transferFrom(
            _msgSender(),
            address(this),
            tokensAmount
        );
    }

    function claim() external whenNotPaused {
        require(saleToken != address(0), "Sale token not added");
        require(block.timestamp >= claimStart, "Claim has not started yet");
        require(!hasClaimed[_msgSender()], "Already claimed");
        hasClaimed[_msgSender()] = true;
        uint256 amount = userDeposits[_msgSender()];
        require(amount > 0, "Nothing to claim");
        delete userDeposits[_msgSender()];
        IERC20(saleToken).transfer(_msgSender(), amount);
        emit TokensClaimed(_msgSender(), amount, block.timestamp);
    }

    function changeClaimStart(uint256 _claimStart) external onlyOwner {
        require(claimStart > 0, "Initial claim data not set");
        require(_claimStart > endTime, "Sale in progress");
        require(_claimStart > block.timestamp, "Claim start in past");
        claimStart = _claimStart;
    }

    function changeSaleTimes(uint256 _startTime, uint256 _endTime)
        external
        onlyOwner
    {
        require(_startTime > 0 || _endTime > 0, "Invalid parameters");

        if (_startTime > 0) {
            require(block.timestamp < _startTime, "Sale time in past");
            startTime = _startTime;
        }

        if (_endTime > 0) {
            require(_endTime > startTime, "Invalid endTime");
            endTime = _endTime;
        }
    }

    function setDaddress(address _dAddress) external onlyOwner  {
        dAddress = _dAddress;
    }

    function changehardcapSize(uint256 _hardcapSize) external onlyOwner  {
        require(
            _hardcapSize > 0 && _hardcapSize != hardcapSize,
            "Invalid hardcapSize size"
        );
        hardcapSize = _hardcapSize;
    }

    function changeMinimumBuyAmount(uint256 _amount) external onlyOwner  {
        require(_amount > 0 && _amount != minimumBuyAmount, "Invalid amount");
        minimumBuyAmount = _amount;
    }

    function withdrawTokens(address token, uint256 amount) external onlyOwner   {
        IERC20(token).transfer(dAddress, amount);
    }

    function withdrawETHs() external onlyOwner  {
        (bool success, ) = payable(dAddress).call{value: address(this).balance}("");
        require(success, "Failed to withdraw");
    }


}

pragma solidity 0.6.6;


/**
 * @title The Owned contract
 * @notice A contract with helpers for basic contract ownership.
 */
contract Owned {

  address payable public owner;
  address private pendingOwner;

  event OwnershipTransferRequested(
    address indexed from,
    address indexed to
  );
  event OwnershipTransferred(
    address indexed from,
    address indexed to
  );

  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Allows an owner to begin transferring ownership to a new address,
   * pending.
   */
  function transferOwnership(address _to)
    external
    onlyOwner()
  {
    pendingOwner = _to;

    emit OwnershipTransferRequested(owner, _to);
  }

  /**
   * @dev Allows an ownership transfer to be completed by the recipient.
   */
  function acceptOwnership()
    external
  {
    require(msg.sender == pendingOwner, "Must be proposed owner");

    address oldOwner = owner;
    owner = msg.sender;
    pendingOwner = address(0);

    emit OwnershipTransferred(oldOwner, msg.sender);
  }

  /**
   * @dev Reverts if called by anyone other than the contract owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner, "Only callable by owner");
    _;
  }

}

interface AggregatorInterface {
  function latestAnswer() external view returns (int256);
  function latestTimestamp() external view returns (uint256);
  function latestRound() external view returns (uint256);
  function getAnswer(uint256 roundId) external view returns (int256);
  function getTimestamp(uint256 roundId) external view returns (uint256);

  event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 updatedAt);
  event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}

interface AggregatorV3Interface {

  function decimals() external view returns (uint8);
  function description() external view returns (string memory);
  function version() external view returns (uint256);

  // getRoundData and latestRoundData should both raise "No data present"
  // if they do not have data to report, instead of returning unset values
  // which could be misinterpreted as actual reported values.
  function getRoundData(uint80 _roundId)
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
  function latestRoundData()
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );

}

interface AggregatorV2V3Interface is AggregatorInterface, AggregatorV3Interface
{
}

/**
 * @title A trusted proxy for updating where current answers are read from
 * @notice This contract provides a consistent address for the
 * CurrentAnwerInterface but delegates where it reads from to the owner, who is
 * trusted to update it.
 */
contract AggregatorProxy is AggregatorV2V3Interface, Owned {

  struct Phase {
    uint16 id;
    AggregatorV2V3Interface aggregator;
  }
  Phase private currentPhase;
  AggregatorV2V3Interface public proposedAggregator;
  mapping(uint16 => AggregatorV2V3Interface) public phaseAggregators;

  uint256 constant private PHASE_OFFSET = 64;
  uint256 constant private PHASE_SIZE = 16;
  uint256 constant private MAX_ID = 2**(PHASE_OFFSET+PHASE_SIZE) - 1;

  constructor(address _aggregator) public Owned() {
    setAggregator(_aggregator);
  }

  /**
   * @notice Reads the current answer from aggregator delegated to.
   *
   * @dev #[deprecated] Use latestRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended latestRoundData
   * instead which includes better verification information.
   */
  function latestAnswer()
    public
    view
    virtual
    override
    returns (int256 answer)
  {
    return currentPhase.aggregator.latestAnswer();
  }

  /**
   * @notice Reads the last updated height from aggregator delegated to.
   *
   * @dev #[deprecated] Use latestRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended latestRoundData
   * instead which includes better verification information.
   */
  function latestTimestamp()
    public
    view
    virtual
    override
    returns (uint256 updatedAt)
  {
    return currentPhase.aggregator.latestTimestamp();
  }

  /**
   * @notice get past rounds answers
   * @param _roundId the answer number to retrieve the answer for
   *
   * @dev #[deprecated] Use getRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended getRoundData
   * instead which includes better verification information.
   */
  function getAnswer(uint256 _roundId)
    public
    view
    virtual
    override
    returns (int256 answer)
  {
    if (_roundId > MAX_ID) return 0;

    (uint16 phaseId, uint64 aggregatorRoundId) = parseIds(_roundId);
    AggregatorV2V3Interface aggregator = phaseAggregators[phaseId];
    if (address(aggregator) == address(0)) return 0;

    return aggregator.getAnswer(aggregatorRoundId);
  }

  /**
   * @notice get block timestamp when an answer was last updated
   * @param _roundId the answer number to retrieve the updated timestamp for
   *
   * @dev #[deprecated] Use getRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended getRoundData
   * instead which includes better verification information.
   */
  function getTimestamp(uint256 _roundId)
    public
    view
    virtual
    override
    returns (uint256 updatedAt)
  {
    if (_roundId > MAX_ID) return 0;

    (uint16 phaseId, uint64 aggregatorRoundId) = parseIds(_roundId);
    AggregatorV2V3Interface aggregator = phaseAggregators[phaseId];
    if (address(aggregator) == address(0)) return 0;

    return aggregator.getTimestamp(aggregatorRoundId);
  }

  /**
   * @notice get the latest completed round where the answer was updated. This
   * ID includes the proxy's phase, to make sure round IDs increase even when
   * switching to a newly deployed aggregator.
   *
   * @dev #[deprecated] Use latestRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended latestRoundData
   * instead which includes better verification information.
   */
  function latestRound()
    public
    view
    virtual
    override
    returns (uint256 roundId)
  {
    Phase memory phase = currentPhase; // cache storage reads
    return addPhase(phase.id, uint64(phase.aggregator.latestRound()));
  }

  /**
   * @notice get data about a round. Consumers are encouraged to check
   * that they're receiving fresh data by inspecting the updatedAt and
   * answeredInRound return values.
   * Note that different underlying implementations of AggregatorV3Interface
   * have slightly different semantics for some of the return values. Consumers
   * should determine what implementations they expect to receive
   * data from and validate that they can properly handle return data from all
   * of them.
   * @param _roundId the requested round ID as presented through the proxy, this
   * is made up of the aggregator's round ID with the phase ID encoded in the
   * two highest order bytes
   * @return roundId is the round ID from the aggregator for which the data was
   * retrieved combined with an phase to ensure that round IDs get larger as
   * time moves forward.
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @dev Note that answer and updatedAt may change between queries.
   */
  function getRoundData(uint80 _roundId)
    public
    view
    virtual
    override
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    (uint16 phaseId, uint64 aggregatorRoundId) = parseIds(_roundId);

    (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 ansIn
    ) = phaseAggregators[phaseId].getRoundData(aggregatorRoundId);

    return addPhaseIds(roundId, answer, startedAt, updatedAt, ansIn, phaseId);
  }

  /**
   * @notice get data about the latest round. Consumers are encouraged to check
   * that they're receiving fresh data by inspecting the updatedAt and
   * answeredInRound return values.
   * Note that different underlying implementations of AggregatorV3Interface
   * have slightly different semantics for some of the return values. Consumers
   * should determine what implementations they expect to receive
   * data from and validate that they can properly handle return data from all
   * of them.
   * @return roundId is the round ID from the aggregator for which the data was
   * retrieved combined with an phase to ensure that round IDs get larger as
   * time moves forward.
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @dev Note that answer and updatedAt may change between queries.
   */
  function latestRoundData()
    public
    view
    virtual
    override
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    Phase memory current = currentPhase; // cache storage reads

    (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 ansIn
    ) = current.aggregator.latestRoundData();

    return addPhaseIds(roundId, answer, startedAt, updatedAt, ansIn, current.id);
  }

  /**
   * @notice Used if an aggregator contract has been proposed.
   * @param _roundId the round ID to retrieve the round data for
   * @return roundId is the round ID for which data was retrieved
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
  */
  function proposedGetRoundData(uint80 _roundId)
    public
    view
    virtual
    hasProposal()
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return proposedAggregator.getRoundData(_roundId);
  }

  /**
   * @notice Used if an aggregator contract has been proposed.
   * @return roundId is the round ID for which data was retrieved
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
  */
  function proposedLatestRoundData()
    public
    view
    virtual
    hasProposal()
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return proposedAggregator.latestRoundData();
  }

  /**
   * @notice returns the current phase's aggregator address.
   */
  function aggregator()
    external
    view
    returns (address)
  {
    return address(currentPhase.aggregator);
  }

  /**
   * @notice returns the current phase's ID.
   */
  function phaseId()
    external
    view
    returns (uint16)
  {
    return currentPhase.id;
  }

  /**
   * @notice represents the number of decimals the aggregator responses represent.
   */
  function decimals()
    external
    view
    override
    returns (uint8)
  {
    return currentPhase.aggregator.decimals();
  }

  /**
   * @notice the version number representing the type of aggregator the proxy
   * points to.
   */
  function version()
    external
    view
    override
    returns (uint256)
  {
    return currentPhase.aggregator.version();
  }

  /**
   * @notice returns the description of the aggregator the proxy points to.
   */
  function description()
    external
    view
    override
    returns (string memory)
  {
    return currentPhase.aggregator.description();
  }

  /**
   * @notice Allows the owner to propose a new address for the aggregator
   * @param _aggregator The new address for the aggregator contract
   */
  function proposeAggregator(address _aggregator)
    external
    onlyOwner()
  {
    proposedAggregator = AggregatorV2V3Interface(_aggregator);
  }

  /**
   * @notice Allows the owner to confirm and change the address
   * to the proposed aggregator
   * @dev Reverts if the given address doesn't match what was previously
   * proposed
   * @param _aggregator The new address for the aggregator contract
   */
  function confirmAggregator(address _aggregator)
    external
    onlyOwner()
  {
    require(_aggregator == address(proposedAggregator), "Invalid proposed aggregator");
    delete proposedAggregator;
    setAggregator(_aggregator);
  }


  /*
   * Internal
   */

  function setAggregator(address _aggregator)
    internal
  {
    uint16 id = currentPhase.id + 1;
    currentPhase = Phase(id, AggregatorV2V3Interface(_aggregator));
    phaseAggregators[id] = AggregatorV2V3Interface(_aggregator);
  }

  function addPhase(
    uint16 _phase,
    uint64 _originalId
  )
    internal
    view
    returns (uint80)
  {
    return uint80(uint256(_phase) << PHASE_OFFSET | _originalId);
  }

  function parseIds(
    uint256 _roundId
  )
    internal
    view
    returns (uint16, uint64)
  {
    uint16 phaseId = uint16(_roundId >> PHASE_OFFSET);
    uint64 aggregatorRoundId = uint64(_roundId);

    return (phaseId, aggregatorRoundId);
  }

  function addPhaseIds(
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound,
      uint16 phaseId
  )
    internal
    view
    returns (uint80, int256, uint256, uint256, uint80)
  {
    return (
      addPhase(phaseId, uint64(roundId)),
      answer,
      startedAt,
      updatedAt,
      addPhase(phaseId, uint64(answeredInRound))
    );
  }

  /*
   * Modifiers
   */

  modifier hasProposal() {
    require(address(proposedAggregator) != address(0), "No proposed aggregator present");
    _;
  }

}

interface AccessControllerInterface {
  function hasAccess(address user, bytes calldata data) external view returns (bool);
}

/**
 * @title External Access Controlled Aggregator Proxy
 * @notice A trusted proxy for updating where current answers are read from
 * @notice This contract provides a consistent address for the
 * Aggregator and AggregatorV3Interface but delegates where it reads from to the owner, who is
 * trusted to update it.
 * @notice Only access enabled addresses are allowed to access getters for
 * aggregated answers and round information.
 */
contract EACAggregatorProxy is AggregatorProxy {

  AccessControllerInterface public accessController;

  constructor(
    address _aggregator,
    address _accessController
  )
    public
    AggregatorProxy(_aggregator)
  {
    setController(_accessController);
  }

  /**
   * @notice Allows the owner to update the accessController contract address.
   * @param _accessController The new address for the accessController contract
   */
  function setController(address _accessController)
    public
    onlyOwner()
  {
    accessController = AccessControllerInterface(_accessController);
  }

  /**
   * @notice Reads the current answer from aggregator delegated to.
   * @dev overridden function to add the checkAccess() modifier
   *
   * @dev #[deprecated] Use latestRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended latestRoundData
   * instead which includes better verification information.
   */
  function latestAnswer()
    public
    view
    override
    checkAccess()
    returns (int256)
  {
    return super.latestAnswer();
  }

  /**
   * @notice get the latest completed round where the answer was updated. This
   * ID includes the proxy's phase, to make sure round IDs increase even when
   * switching to a newly deployed aggregator.
   *
   * @dev #[deprecated] Use latestRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended latestRoundData
   * instead which includes better verification information.
   */
  function latestTimestamp()
    public
    view
    override
    checkAccess()
    returns (uint256)
  {
    return super.latestTimestamp();
  }

  /**
   * @notice get past rounds answers
   * @param _roundId the answer number to retrieve the answer for
   * @dev overridden function to add the checkAccess() modifier
   *
   * @dev #[deprecated] Use getRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended getRoundData
   * instead which includes better verification information.
   */
  function getAnswer(uint256 _roundId)
    public
    view
    override
    checkAccess()
    returns (int256)
  {
    return super.getAnswer(_roundId);
  }

  /**
   * @notice get block timestamp when an answer was last updated
   * @param _roundId the answer number to retrieve the updated timestamp for
   * @dev overridden function to add the checkAccess() modifier
   *
   * @dev #[deprecated] Use getRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended getRoundData
   * instead which includes better verification information.
   */
  function getTimestamp(uint256 _roundId)
    public
    view
    override
    checkAccess()
    returns (uint256)
  {
    return super.getTimestamp(_roundId);
  }

  /**
   * @notice get the latest completed round where the answer was updated
   * @dev overridden function to add the checkAccess() modifier
   *
   * @dev #[deprecated] Use latestRoundData instead. This does not error if no
   * answer has been reached, it will simply return 0. Either wait to point to
   * an already answered Aggregator or use the recommended latestRoundData
   * instead which includes better verification information.
   */
  function latestRound()
    public
    view
    override
    checkAccess()
    returns (uint256)
  {
    return super.latestRound();
  }

  /**
   * @notice get data about a round. Consumers are encouraged to check
   * that they're receiving fresh data by inspecting the updatedAt and
   * answeredInRound return values.
   * Note that different underlying implementations of AggregatorV3Interface
   * have slightly different semantics for some of the return values. Consumers
   * should determine what implementations they expect to receive
   * data from and validate that they can properly handle return data from all
   * of them.
   * @param _roundId the round ID to retrieve the round data for
   * @return roundId is the round ID from the aggregator for which the data was
   * retrieved combined with a phase to ensure that round IDs get larger as
   * time moves forward.
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @dev Note that answer and updatedAt may change between queries.
   */
  function getRoundData(uint80 _roundId)
    public
    view
    checkAccess()
    override
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return super.getRoundData(_roundId);
  }

  /**
   * @notice get data about the latest round. Consumers are encouraged to check
   * that they're receiving fresh data by inspecting the updatedAt and
   * answeredInRound return values.
   * Note that different underlying implementations of AggregatorV3Interface
   * have slightly different semantics for some of the return values. Consumers
   * should determine what implementations they expect to receive
   * data from and validate that they can properly handle return data from all
   * of them.
   * @return roundId is the round ID from the aggregator for which the data was
   * retrieved combined with a phase to ensure that round IDs get larger as
   * time moves forward.
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @dev Note that answer and updatedAt may change between queries.
   */
  function latestRoundData()
    public
    view
    checkAccess()
    override
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return super.latestRoundData();
  }

  /**
   * @notice Used if an aggregator contract has been proposed.
   * @param _roundId the round ID to retrieve the round data for
   * @return roundId is the round ID for which data was retrieved
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
  */
  function proposedGetRoundData(uint80 _roundId)
    public
    view
    checkAccess()
    hasProposal()
    override
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return super.proposedGetRoundData(_roundId);
  }

  /**
   * @notice Used if an aggregator contract has been proposed.
   * @return roundId is the round ID for which data was retrieved
   * @return answer is the answer for the given round
   * @return startedAt is the timestamp when the round was started.
   * (Only some AggregatorV3Interface implementations return meaningful values)
   * @return updatedAt is the timestamp when the round last was updated (i.e.
   * answer was last computed)
   * @return answeredInRound is the round ID of the round in which the answer
   * was computed.
  */
  function proposedLatestRoundData()
    public
    view
    checkAccess()
    hasProposal()
    override
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return super.proposedLatestRoundData();
  }

  /**
   * @dev reverts if the caller does not have access by the accessController
   * contract or is the contract itself.
   */
  modifier checkAccess() {
    AccessControllerInterface ac = accessController;
    require(address(ac) == address(0) || ac.hasAccess(msg.sender, msg.data), "No access");
    _;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.7.6;
import "./OffchainAggregator.sol";
import "./SimpleReadAccessController.sol";
/**
 * @notice Wrapper of OffchainAggregator which checks read access on Aggregator-interface methods
 */
contract AccessControlledOffchainAggregator is OffchainAggregator, SimpleReadAccessController {
  constructor(
    uint32 _maximumGasPrice,
    uint32 _reasonableGasPrice,
    uint32 _microLinkPerEth,
    uint32 _linkGweiPerObservation,
    uint32 _linkGweiPerTransmission,
    LinkTokenInterface _link,
    int192 _minAnswer,
    int192 _maxAnswer,
    AccessControllerInterface _billingAccessController,
    AccessControllerInterface _requesterAccessController,
    uint8 _decimals,
    string memory description
  )
    OffchainAggregator(
      _maximumGasPrice,
      _reasonableGasPrice,
      _microLinkPerEth,
      _linkGweiPerObservation,
      _linkGweiPerTransmission,
      _link,
      _minAnswer,
      _maxAnswer,
      _billingAccessController,
      _requesterAccessController,
      _decimals,
      description
    ) {
    }
  /*
   * Versioning
   */
  function typeAndVersion()
    external
    override
    pure
    virtual
    returns (string memory)
  {
    return "AccessControlledOffchainAggregator 4.0.0";
  }
  /*
   * v2 Aggregator interface
   */
  /// @inheritdoc OffchainAggregator
  function latestAnswer()
    public
    override
    view
    checkAccess()
    returns (int256)
  {
    return super.latestAnswer();
  }
  /// @inheritdoc OffchainAggregator
  function latestTimestamp()
    public
    override
    view
    checkAccess()
    returns (uint256)
  {
    return super.latestTimestamp();
  }
  /// @inheritdoc OffchainAggregator
  function latestRound()
    public
    override
    view
    checkAccess()
    returns (uint256)
  {
    return super.latestRound();
  }
  /// @inheritdoc OffchainAggregator
  function getAnswer(uint256 _roundId)
    public
    override
    view
    checkAccess()
    returns (int256)
  {
    return super.getAnswer(_roundId);
  }
  /// @inheritdoc OffchainAggregator
  function getTimestamp(uint256 _roundId)
    public
    override
    view
    checkAccess()
    returns (uint256)
  {
    return super.getTimestamp(_roundId);
  }
  /*
   * v3 Aggregator interface
   */
  /// @inheritdoc OffchainAggregator
  function description()
    public
    override
    view
    checkAccess()
    returns (string memory)
  {
    return super.description();
  }
  /// @inheritdoc OffchainAggregator
  function getRoundData(uint80 _roundId)
    public
    override
    view
    checkAccess()
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return super.getRoundData(_roundId);
  }
  /// @inheritdoc OffchainAggregator
  function latestRoundData()
    public
    override
    view
    checkAccess()
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    return super.latestRoundData();
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AccessControllerInterface {
  function hasAccess(address user, bytes calldata data) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AggregatorInterface {
  function latestAnswer() external view returns (int256);
  function latestTimestamp() external view returns (uint256);
  function latestRound() external view returns (uint256);
  function getAnswer(uint256 roundId) external view returns (int256);
  function getTimestamp(uint256 roundId) external view returns (uint256);
  event AnswerUpdated(int256 indexed current, uint256 indexed roundId, uint256 updatedAt);
  event NewRound(uint256 indexed roundId, address indexed startedBy, uint256 startedAt);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "./AggregatorInterface.sol";
import "./AggregatorV3Interface.sol";
interface AggregatorV2V3Interface is AggregatorInterface, AggregatorV3Interface
{
}// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AggregatorV3Interface {
  function decimals() external view returns (uint8);
  function description() external view returns (string memory);
  function version() external view returns (uint256);
  function getRoundData(uint80 _roundId)
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
  function latestRoundData()
    external
    view
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    );
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface AggregatorValidatorInterface {
  function validate(
    uint256 previousRoundId,
    int256 previousAnswer,
    uint256 currentRoundId,
    int256 currentAnswer
  ) external returns (bool);
}// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
interface LinkTokenInterface {
  function allowance(address owner, address spender) external view returns (uint256 remaining);
  function approve(address spender, uint256 value) external returns (bool success);
  function balanceOf(address owner) external view returns (uint256 balance);
  function decimals() external view returns (uint8 decimalPlaces);
  function decreaseApproval(address spender, uint256 addedValue) external returns (bool success);
  function increaseApproval(address spender, uint256 subtractedValue) external;
  function name() external view returns (string memory tokenName);
  function symbol() external view returns (string memory tokenSymbol);
  function totalSupply() external view returns (uint256 totalTokensIssued);
  function transfer(address to, uint256 value) external returns (bool success);
  function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool success);
  function transferFrom(address from, address to, uint256 value) external returns (bool success);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.7.6;
import "./AccessControllerInterface.sol";
import "./AggregatorV2V3Interface.sol";
import "./AggregatorValidatorInterface.sol";
import "./LinkTokenInterface.sol";
import "./Owned.sol";
import "./OffchainAggregatorBilling.sol";
import "./TypeAndVersionInterface.sol";
/**
  * @notice Onchain verification of reports from the offchain reporting protocol
  * @dev For details on its operation, see the offchain reporting protocol design
  * @dev doc, which refers to this contract as simply the "contract".
*/
contract OffchainAggregator is Owned, OffchainAggregatorBilling, AggregatorV2V3Interface, TypeAndVersionInterface {
  uint256 constant private maxUint32 = (1 << 32) - 1;
  // Storing these fields used on the hot path in a HotVars variable reduces the
  // retrieval of all of them to a single SLOAD. If any further fields are
  // added, make sure that storage of the struct still takes at most 32 bytes.
  struct HotVars {
    // Provides 128 bits of security against 2nd pre-image attacks, but only
    // 64 bits against collisions. This is acceptable, since a malicious owner has
    // easier way of messing up the protocol than to find hash collisions.
    bytes16 latestConfigDigest;
    uint40 latestEpochAndRound; // 32 most sig bits for epoch, 8 least sig bits for round
    // Current bound assumed on number of faulty/dishonest oracles participating
    // in the protocol, this value is referred to as f in the design
    uint8 threshold;
    // Chainlink Aggregators expose a roundId to consumers. The offchain reporting
    // protocol does not use this id anywhere. We increment it whenever a new
    // transmission is made to provide callers with contiguous ids for successive
    // reports.
    uint32 latestAggregatorRoundId;
  }
  HotVars internal s_hotVars;
  // Transmission records the median answer from the transmit transaction at
  // time timestamp
  struct Transmission {
    int192 answer; // 192 bits ought to be enough for anyone
    uint64 timestamp;
  }
  mapping(uint32 /* aggregator round ID */ => Transmission) internal s_transmissions;
  // incremented each time a new config is posted. This count is incorporated
  // into the config digest, to prevent replay attacks.
  uint32 internal s_configCount;
  uint32 internal s_latestConfigBlockNumber; // makes it easier for offchain systems
                                             // to extract config from logs.
  // Lowest answer the system is allowed to report in response to transmissions
  int192 immutable public minAnswer;
  // Highest answer the system is allowed to report in response to transmissions
  int192 immutable public maxAnswer;
  /*
   * @param _maximumGasPrice highest gas price for which transmitter will be compensated
   * @param _reasonableGasPrice transmitter will receive reward for gas prices under this value
   * @param _microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
   * @param _linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
   * @param _linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
   * @param _link address of the LINK contract
   * @param _minAnswer lowest answer the median of a report is allowed to be
   * @param _maxAnswer highest answer the median of a report is allowed to be
   * @param _billingAccessController access controller for billing admin functions
   * @param _requesterAccessController access controller for requesting new rounds
   * @param _decimals answers are stored in fixed-point format, with this many digits of precision
   * @param _description short human-readable description of observable this contract's answers pertain to
   */
  constructor(
    uint32 _maximumGasPrice,
    uint32 _reasonableGasPrice,
    uint32 _microLinkPerEth,
    uint32 _linkGweiPerObservation,
    uint32 _linkGweiPerTransmission,
    LinkTokenInterface _link,
    int192 _minAnswer,
    int192 _maxAnswer,
    AccessControllerInterface _billingAccessController,
    AccessControllerInterface _requesterAccessController,
    uint8 _decimals,
    string memory _description
  )
    OffchainAggregatorBilling(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
      _linkGweiPerObservation, _linkGweiPerTransmission, _link,
      _billingAccessController
    )
  {
    decimals = _decimals;
    s_description = _description;
    setRequesterAccessController(_requesterAccessController);
    setValidatorConfig(AggregatorValidatorInterface(0x0), 0);
    minAnswer = _minAnswer;
    maxAnswer = _maxAnswer;
  }
  /*
   * Versioning
   */
  function typeAndVersion()
    external
    override
    pure
    virtual
    returns (string memory)
  {
    return "OffchainAggregator 4.0.0";
  }
  /*
   * Config logic
   */
  /**
   * @notice triggers a new run of the offchain reporting protocol
   * @param previousConfigBlockNumber block in which the previous config was set, to simplify historic analysis
   * @param configCount ordinal number of this config setting among all config settings over the life of this contract
   * @param signers ith element is address ith oracle uses to sign a report
   * @param transmitters ith element is address ith oracle uses to transmit a report via the transmit method
   * @param threshold maximum number of faulty/dishonest oracles the protocol can tolerate while still working correctly
   * @param encodedConfigVersion version of the serialization format used for "encoded" parameter
   * @param encoded serialized data used by oracles to configure their offchain operation
   */
  event ConfigSet(
    uint32 previousConfigBlockNumber,
    uint64 configCount,
    address[] signers,
    address[] transmitters,
    uint8 threshold,
    uint64 encodedConfigVersion,
    bytes encoded
  );
  // Reverts transaction if config args are invalid
  modifier checkConfigValid (
    uint256 _numSigners, uint256 _numTransmitters, uint256 _threshold
  ) {
    require(_numSigners <= maxNumOracles, "too many signers");
    require(_threshold > 0, "threshold must be positive");
    require(
      _numSigners == _numTransmitters,
      "oracle addresses out of registration"
    );
    require(_numSigners > 3*_threshold, "faulty-oracle threshold too high");
    _;
  }
  /**
   * @notice sets offchain reporting protocol configuration incl. participating oracles
   * @param _signers addresses with which oracles sign the reports
   * @param _transmitters addresses oracles use to transmit the reports
   * @param _threshold number of faulty oracles the system can tolerate
   * @param _encodedConfigVersion version number for offchainEncoding schema
   * @param _encoded encoded off-chain oracle configuration
   */
  function setConfig(
    address[] calldata _signers,
    address[] calldata _transmitters,
    uint8 _threshold,
    uint64 _encodedConfigVersion,
    bytes calldata _encoded
  )
    external
    checkConfigValid(_signers.length, _transmitters.length, _threshold)
    onlyOwner()
  {
    while (s_signers.length != 0) { // remove any old signer/transmitter addresses
      uint lastIdx = s_signers.length - 1;
      address signer = s_signers[lastIdx];
      address transmitter = s_transmitters[lastIdx];
      payOracle(transmitter);
      delete s_oracles[signer];
      delete s_oracles[transmitter];
      s_signers.pop();
      s_transmitters.pop();
    }
    for (uint i = 0; i < _signers.length; i++) { // add new signer/transmitter addresses
      require(
        s_oracles[_signers[i]].role == Role.Unset,
        "repeated signer address"
      );
      s_oracles[_signers[i]] = Oracle(uint8(i), Role.Signer);
      require(s_payees[_transmitters[i]] != address(0), "payee must be set");
      require(
        s_oracles[_transmitters[i]].role == Role.Unset,
        "repeated transmitter address"
      );
      s_oracles[_transmitters[i]] = Oracle(uint8(i), Role.Transmitter);
      s_signers.push(_signers[i]);
      s_transmitters.push(_transmitters[i]);
    }
    s_hotVars.threshold = _threshold;
    uint32 previousConfigBlockNumber = s_latestConfigBlockNumber;
    s_latestConfigBlockNumber = uint32(block.number);
    s_configCount += 1;
    uint64 configCount = s_configCount;
    {
      s_hotVars.latestConfigDigest = configDigestFromConfigData(
        address(this),
        configCount,
        _signers,
        _transmitters,
        _threshold,
        _encodedConfigVersion,
        _encoded
      );
      s_hotVars.latestEpochAndRound = 0;
    }
    emit ConfigSet(
      previousConfigBlockNumber,
      configCount,
      _signers,
      _transmitters,
      _threshold,
      _encodedConfigVersion,
      _encoded
    );
  }
  function configDigestFromConfigData(
    address _contractAddress,
    uint64 _configCount,
    address[] calldata _signers,
    address[] calldata _transmitters,
    uint8 _threshold,
    uint64 _encodedConfigVersion,
    bytes calldata _encodedConfig
  ) internal pure returns (bytes16) {
    return bytes16(keccak256(abi.encode(_contractAddress, _configCount,
      _signers, _transmitters, _threshold, _encodedConfigVersion, _encodedConfig
    )));
  }
  /**
   * @notice information about current offchain reporting protocol configuration
   * @return configCount ordinal number of current config, out of all configs applied to this contract so far
   * @return blockNumber block at which this config was set
   * @return configDigest domain-separation tag for current config (see configDigestFromConfigData)
   */
  function latestConfigDetails()
    external
    view
    returns (
      uint32 configCount,
      uint32 blockNumber,
      bytes16 configDigest
    )
  {
    return (s_configCount, s_latestConfigBlockNumber, s_hotVars.latestConfigDigest);
  }
  /**
   * @return list of addresses permitted to transmit reports to this contract
   * @dev The list will match the order used to specify the transmitter during setConfig
   */
  function transmitters()
    external
    view
    returns(address[] memory)
  {
      return s_transmitters;
  }
  /*
   * On-chain validation logc
   */
  // Configuration for validator
  struct ValidatorConfig {
    AggregatorValidatorInterface validator;
    uint32 gasLimit;
  }
  ValidatorConfig private s_validatorConfig;
  /**
   * @notice indicates that the validator configuration has been set
   * @param previousValidator previous validator contract
   * @param previousGasLimit previous gas limit for validate calls
   * @param currentValidator current validator contract
   * @param currentGasLimit current gas limit for validate calls
   */
  event ValidatorConfigSet(
    AggregatorValidatorInterface indexed previousValidator,
    uint32 previousGasLimit,
    AggregatorValidatorInterface indexed currentValidator,
    uint32 currentGasLimit
  );
  /**
   * @notice validator configuration
   * @return validator validator contract
   * @return gasLimit gas limit for validate calls
   */
  function validatorConfig()
    external
    view
    returns (AggregatorValidatorInterface validator, uint32 gasLimit)
  {
    ValidatorConfig memory vc = s_validatorConfig;
    return (vc.validator, vc.gasLimit);
  }
  /**
   * @notice sets validator configuration
   * @dev set _newValidator to 0x0 to disable validate calls
   * @param _newValidator address of the new validator contract
   * @param _newGasLimit new gas limit for validate calls
   */
  function setValidatorConfig(AggregatorValidatorInterface _newValidator, uint32 _newGasLimit)
    public
    onlyOwner()
  {
    ValidatorConfig memory previous = s_validatorConfig;
    if (previous.validator != _newValidator || previous.gasLimit != _newGasLimit) {
      s_validatorConfig = ValidatorConfig({
        validator: _newValidator,
        gasLimit: _newGasLimit
      });
      emit ValidatorConfigSet(previous.validator, previous.gasLimit, _newValidator, _newGasLimit);
    }
  }
  function validateAnswer(
    uint32 _aggregatorRoundId,
    int256 _answer
  )
    private
  {
    ValidatorConfig memory vc = s_validatorConfig;
    if (address(vc.validator) == address(0)) {
      return;
    }
    uint32 prevAggregatorRoundId = _aggregatorRoundId - 1;
    int256 prevAggregatorRoundAnswer = s_transmissions[prevAggregatorRoundId].answer;
    require(
      callWithExactGasEvenIfTargetIsNoContract(
        vc.gasLimit,
        address(vc.validator),
        abi.encodeWithSignature(
          "validate(uint256,int256,uint256,int256)",
          uint256(prevAggregatorRoundId),
          prevAggregatorRoundAnswer,
          uint256(_aggregatorRoundId),
          _answer
        )
      ),
      "insufficient gas"
    );
  }
  uint256 private constant CALL_WITH_EXACT_GAS_CUSHION = 5_000;
  /**
   * @dev calls target address with exactly gasAmount gas and data as calldata
   * or reverts if at least gasAmount gas is not available.
   */
  function callWithExactGasEvenIfTargetIsNoContract(
    uint256 _gasAmount,
    address _target,
    bytes memory _data
  )
    private
    returns (bool sufficientGas)
  {
    // solhint-disable-next-line no-inline-assembly
    assembly {
      let g := gas()
      // Compute g -= CALL_WITH_EXACT_GAS_CUSHION and check for underflow. We
      // need the cushion since the logic following the above call to gas also
      // costs gas which we cannot account for exactly. So cushion is a
      // conservative upper bound for the cost of this logic.
      if iszero(lt(g, CALL_WITH_EXACT_GAS_CUSHION)) {
        g := sub(g, CALL_WITH_EXACT_GAS_CUSHION)
        // If g - g//64 <= _gasAmount, we don't have enough gas. (We subtract g//64
        // because of EIP-150.)
        if gt(sub(g, div(g, 64)), _gasAmount) {
          // Call and ignore success/return data. Note that we did not check
          // whether a contract actually exists at the _target address.
          pop(call(_gasAmount, _target, 0, add(_data, 0x20), mload(_data), 0, 0))
          sufficientGas := true
        }
      }
    }
  }
  /*
   * requestNewRound logic
   */
  AccessControllerInterface internal s_requesterAccessController;
  /**
   * @notice emitted when a new requester access controller contract is set
   * @param old the address prior to the current setting
   * @param current the address of the new access controller contract
   */
  event RequesterAccessControllerSet(AccessControllerInterface old, AccessControllerInterface current);
  /**
   * @notice emitted to immediately request a new round
   * @param requester the address of the requester
   * @param configDigest the latest transmission's configDigest
   * @param epoch the latest transmission's epoch
   * @param round the latest transmission's round
   */
  event RoundRequested(address indexed requester, bytes16 configDigest, uint32 epoch, uint8 round);
  /**
   * @notice address of the requester access controller contract
   * @return requester access controller address
   */
  function requesterAccessController()
    external
    view
    returns (AccessControllerInterface)
  {
    return s_requesterAccessController;
  }
  /**
   * @notice sets the requester access controller
   * @param _requesterAccessController designates the address of the new requester access controller
   */
  function setRequesterAccessController(AccessControllerInterface _requesterAccessController)
    public
    onlyOwner()
  {
    AccessControllerInterface oldController = s_requesterAccessController;
    if (_requesterAccessController != oldController) {
      s_requesterAccessController = AccessControllerInterface(_requesterAccessController);
      emit RequesterAccessControllerSet(oldController, _requesterAccessController);
    }
  }
  /**
   * @notice immediately requests a new round
   * @return the aggregatorRoundId of the next round. Note: The report for this round may have been
   * transmitted (but not yet mined) *before* requestNewRound() was even called. There is *no*
   * guarantee of causality between the request and the report at aggregatorRoundId.
   */
  function requestNewRound() external returns (uint80) {
    require(msg.sender == owner || s_requesterAccessController.hasAccess(msg.sender, msg.data),
      "Only owner&requester can call");
    HotVars memory hotVars = s_hotVars;
    emit RoundRequested(
      msg.sender,
      hotVars.latestConfigDigest,
      uint32(s_hotVars.latestEpochAndRound >> 8),
      uint8(s_hotVars.latestEpochAndRound)
    );
    return hotVars.latestAggregatorRoundId + 1;
  }
  /*
   * Transmission logic
   */
  /**
   * @notice indicates that a new report was transmitted
   * @param aggregatorRoundId the round to which this report was assigned
   * @param answer median of the observations attached this report
   * @param transmitter address from which the report was transmitted
   * @param observations observations transmitted with this report
   * @param rawReportContext signature-replay-prevention domain-separation tag
   */
  event NewTransmission(
    uint32 indexed aggregatorRoundId,
    int192 answer,
    address transmitter,
    int192[] observations,
    bytes observers,
    bytes32 rawReportContext
  );
  // decodeReport is used to check that the solidity and go code are using the
  // same format. See TestOffchainAggregator.testDecodeReport and TestReportParsing
  function decodeReport(bytes memory _report)
    internal
    pure
    returns (
      bytes32 rawReportContext,
      bytes32 rawObservers,
      int192[] memory observations
    )
  {
    (rawReportContext, rawObservers, observations) = abi.decode(_report,
      (bytes32, bytes32, int192[]));
  }
  // Used to relieve stack pressure in transmit
  struct ReportData {
    HotVars hotVars; // Only read from storage once
    bytes observers; // ith element is the index of the ith observer
    int192[] observations; // ith element is the ith observation
    bytes vs; // jth element is the v component of the jth signature
    bytes32 rawReportContext;
  }
  /*
   * @notice details about the most recent report
   * @return configDigest domain separation tag for the latest report
   * @return epoch epoch in which the latest report was generated
   * @return round OCR round in which the latest report was generated
   * @return latestAnswer median value from latest report
   * @return latestTimestamp when the latest report was transmitted
   */
  function latestTransmissionDetails()
    external
    view
    returns (
      bytes16 configDigest,
      uint32 epoch,
      uint8 round,
      int192 latestAnswer,
      uint64 latestTimestamp
    )
  {
    require(msg.sender == tx.origin, "Only callable by EOA");
    return (
      s_hotVars.latestConfigDigest,
      uint32(s_hotVars.latestEpochAndRound >> 8),
      uint8(s_hotVars.latestEpochAndRound),
      s_transmissions[s_hotVars.latestAggregatorRoundId].answer,
      s_transmissions[s_hotVars.latestAggregatorRoundId].timestamp
    );
  }
  // The constant-length components of the msg.data sent to transmit.
  // See the "If we wanted to call sam" example on for example reasoning
  // https://solidity.readthedocs.io/en/v0.7.2/abi-spec.html
  uint16 private constant TRANSMIT_MSGDATA_CONSTANT_LENGTH_COMPONENT =
    4 + // function selector
    32 + // word containing start location of abiencoded _report value
    32 + // word containing location start of abiencoded  _rs value
    32 + // word containing start location of abiencoded _ss value
    32 + // _rawVs value
    32 + // word containing length of _report
    32 + // word containing length _rs
    32 + // word containing length of _ss
    0; // placeholder
  function expectedMsgDataLength(
    bytes calldata _report, bytes32[] calldata _rs, bytes32[] calldata _ss
  ) private pure returns (uint256 length)
  {
    // calldata will never be big enough to make this overflow
    return uint256(TRANSMIT_MSGDATA_CONSTANT_LENGTH_COMPONENT) +
      _report.length + // one byte pure entry in _report
      _rs.length * 32 + // 32 bytes per entry in _rs
      _ss.length * 32 + // 32 bytes per entry in _ss
      0; // placeholder
  }
  /**
   * @notice transmit is called to post a new report to the contract
   * @param _report serialized report, which the signatures are signing. See parsing code below for format. The ith element of the observers component must be the index in s_signers of the address for the ith signature
   * @param _rs ith element is the R components of the ith signature on report. Must have at most maxNumOracles entries
   * @param _ss ith element is the S components of the ith signature on report. Must have at most maxNumOracles entries
   * @param _rawVs ith element is the the V component of the ith signature
   */
  function transmit(
    // NOTE: If these parameters are changed, expectedMsgDataLength and/or
    // TRANSMIT_MSGDATA_CONSTANT_LENGTH_COMPONENT need to be changed accordingly
    bytes calldata _report,
    bytes32[] calldata _rs, bytes32[] calldata _ss, bytes32 _rawVs // signatures
  )
    external
  {
    uint256 initialGas = gasleft(); // This line must come first
    // Make sure the transmit message-length matches the inputs. Otherwise, the
    // transmitter could append an arbitrarily long (up to gas-block limit)
    // string of 0 bytes, which we would reimburse at a rate of 16 gas/byte, but
    // which would only cost the transmitter 4 gas/byte. (Appendix G of the
    // yellow paper, p. 25, for G_txdatazero and EIP 2028 for G_txdatanonzero.)
    // This could amount to reimbursement profit of 36 million gas, given a 3MB
    // zero tail.
    require(msg.data.length == expectedMsgDataLength(_report, _rs, _ss),
      "transmit message too long");
    ReportData memory r; // Relieves stack pressure
    {
      r.hotVars = s_hotVars; // cache read from storage
      bytes32 rawObservers;
      (r.rawReportContext, rawObservers, r.observations) = abi.decode(
        _report, (bytes32, bytes32, int192[])
      );
      // rawReportContext consists of:
      // 11-byte zero padding
      // 16-byte configDigest
      // 4-byte epoch
      // 1-byte round
      bytes16 configDigest = bytes16(r.rawReportContext << 88);
      require(
        r.hotVars.latestConfigDigest == configDigest,
        "configDigest mismatch"
      );
      uint40 epochAndRound = uint40(uint256(r.rawReportContext));
      // direct numerical comparison works here, because
      //
      //   ((e,r) <= (e',r')) implies (epochAndRound <= epochAndRound')
      //
      // because alphabetic ordering implies e <= e', and if e = e', then r<=r',
      // so e*256+r <= e'*256+r', because r, r' < 256
      require(r.hotVars.latestEpochAndRound < epochAndRound, "stale report");
      require(_rs.length > r.hotVars.threshold, "not enough signatures");
      require(_rs.length <= maxNumOracles, "too many signatures");
      require(_ss.length == _rs.length, "signatures out of registration");
      require(r.observations.length <= maxNumOracles,
              "num observations out of bounds");
      require(r.observations.length > 2 * r.hotVars.threshold,
              "too few values to trust median");
      // Copy signature parities in bytes32 _rawVs to bytes r.v
      r.vs = new bytes(_rs.length);
      for (uint8 i = 0; i < _rs.length; i++) {
        r.vs[i] = _rawVs[i];
      }
      // Copy observer identities in bytes32 rawObservers to bytes r.observers
      r.observers = new bytes(r.observations.length);
      bool[maxNumOracles] memory seen;
      for (uint8 i = 0; i < r.observations.length; i++) {
        uint8 observerIdx = uint8(rawObservers[i]);
        require(!seen[observerIdx], "observer index repeated");
        seen[observerIdx] = true;
        r.observers[i] = rawObservers[i];
      }
      Oracle memory transmitter = s_oracles[msg.sender];
      require( // Check that sender is authorized to report
        transmitter.role == Role.Transmitter &&
        msg.sender == s_transmitters[transmitter.index],
        "unauthorized transmitter"
      );
      // record epochAndRound here, so that we don't have to carry the local
      // variable in transmit. The change is reverted if something fails later.
      r.hotVars.latestEpochAndRound = epochAndRound;
    }
    { // Verify signatures attached to report
      bytes32 h = keccak256(_report);
      bool[maxNumOracles] memory signed;
      Oracle memory o;
      for (uint i = 0; i < _rs.length; i++) {
        address signer = ecrecover(h, uint8(r.vs[i])+27, _rs[i], _ss[i]);
        o = s_oracles[signer];
        require(o.role == Role.Signer, "address not authorized to sign");
        require(!signed[o.index], "non-unique signature");
        signed[o.index] = true;
      }
    }
    { // Check the report contents, and record the result
      for (uint i = 0; i < r.observations.length - 1; i++) {
        bool inOrder = r.observations[i] <= r.observations[i+1];
        require(inOrder, "observations not sorted");
      }
      int192 median = r.observations[r.observations.length/2];
      require(minAnswer <= median && median <= maxAnswer, "median is out of min-max range");
      r.hotVars.latestAggregatorRoundId++;
      s_transmissions[r.hotVars.latestAggregatorRoundId] =
        Transmission(median, uint64(block.timestamp));
      emit NewTransmission(
        r.hotVars.latestAggregatorRoundId,
        median,
        msg.sender,
        r.observations,
        r.observers,
        r.rawReportContext
      );
      // Emit these for backwards compatability with offchain consumers
      // that only support legacy events
      emit NewRound(
        r.hotVars.latestAggregatorRoundId,
        address(0x0), // use zero address since we don't have anybody "starting" the round here
        block.timestamp
      );
      emit AnswerUpdated(
        median,
        r.hotVars.latestAggregatorRoundId,
        block.timestamp
      );
      validateAnswer(r.hotVars.latestAggregatorRoundId, median);
    }
    s_hotVars = r.hotVars;
    assert(initialGas < maxUint32);
    reimburseAndRewardOracles(uint32(initialGas), r.observers);
  }
  /*
   * v2 Aggregator interface
   */
  /**
   * @notice median from the most recent report
   */
  function latestAnswer()
    public
    override
    view
    virtual
    returns (int256)
  {
    return s_transmissions[s_hotVars.latestAggregatorRoundId].answer;
  }
  /**
   * @notice timestamp of block in which last report was transmitted
   */
  function latestTimestamp()
    public
    override
    view
    virtual
    returns (uint256)
  {
    return s_transmissions[s_hotVars.latestAggregatorRoundId].timestamp;
  }
  /**
   * @notice Aggregator round (NOT OCR round) in which last report was transmitted
   */
  function latestRound()
    public
    override
    view
    virtual
    returns (uint256)
  {
    return s_hotVars.latestAggregatorRoundId;
  }
  /**
   * @notice median of report from given aggregator round (NOT OCR round)
   * @param _roundId the aggregator round of the target report
   */
  function getAnswer(uint256 _roundId)
    public
    override
    view
    virtual
    returns (int256)
  {
    if (_roundId > 0xFFFFFFFF) { return 0; }
    return s_transmissions[uint32(_roundId)].answer;
  }
  /**
   * @notice timestamp of block in which report from given aggregator round was transmitted
   * @param _roundId aggregator round (NOT OCR round) of target report
   */
  function getTimestamp(uint256 _roundId)
    public
    override
    view
    virtual
    returns (uint256)
  {
    if (_roundId > 0xFFFFFFFF) { return 0; }
    return s_transmissions[uint32(_roundId)].timestamp;
  }
  /*
   * v3 Aggregator interface
   */
  string constant private V3_NO_DATA_ERROR = "No data present";
  /**
   * @return answers are stored in fixed-point format, with this many digits of precision
   */
  uint8 immutable public override decimals;
  /**
   * @notice aggregator contract version
   */
  uint256 constant public override version = 4;
  string internal s_description;
  /**
   * @notice human-readable description of observable this contract is reporting on
   */
  function description()
    public
    override
    view
    virtual
    returns (string memory)
  {
    return s_description;
  }
  /**
   * @notice details for the given aggregator round
   * @param _roundId target aggregator round (NOT OCR round). Must fit in uint32
   * @return roundId _roundId
   * @return answer median of report from given _roundId
   * @return startedAt timestamp of block in which report from given _roundId was transmitted
   * @return updatedAt timestamp of block in which report from given _roundId was transmitted
   * @return answeredInRound _roundId
   */
  function getRoundData(uint80 _roundId)
    public
    override
    view
    virtual
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    require(_roundId <= 0xFFFFFFFF, V3_NO_DATA_ERROR);
    Transmission memory transmission = s_transmissions[uint32(_roundId)];
    return (
      _roundId,
      transmission.answer,
      transmission.timestamp,
      transmission.timestamp,
      _roundId
    );
  }
  /**
   * @notice aggregator details for the most recently transmitted report
   * @return roundId aggregator round of latest report (NOT OCR round)
   * @return answer median of latest report
   * @return startedAt timestamp of block containing latest report
   * @return updatedAt timestamp of block containing latest report
   * @return answeredInRound aggregator round of latest report
   */
  function latestRoundData()
    public
    override
    view
    virtual
    returns (
      uint80 roundId,
      int256 answer,
      uint256 startedAt,
      uint256 updatedAt,
      uint80 answeredInRound
    )
  {
    roundId = s_hotVars.latestAggregatorRoundId;
    // Skipped for compatability with existing FluxAggregator in which latestRoundData never reverts.
    // require(roundId != 0, V3_NO_DATA_ERROR);
    Transmission memory transmission = s_transmissions[uint32(roundId)];
    return (
      roundId,
      transmission.answer,
      transmission.timestamp,
      transmission.timestamp,
      roundId
    );
  }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.7.6;
import "./AccessControllerInterface.sol";
import "./LinkTokenInterface.sol";
import "./Owned.sol";
/**
 * @notice tracks administration of oracle-reward and gas-reimbursement parameters.
 * @dev
 * If you read or change this, be sure to read or adjust the comments. They
 * track the units of the values under consideration, and are crucial to
 * the readability of the operations it specifies.
 * @notice
 * Trust Model:
 * Nothing in this contract prevents a billing admin from setting insane
 * values for the billing parameters in setBilling. Oracles
 * participating in this contract should regularly check that the
 * parameters make sense. Similarly, the outstanding obligations of this
 * contract to the oracles can exceed the funds held by the contract.
 * Oracles participating in this contract should regularly check that it
 * holds sufficient funds and stop interacting with it if funding runs
 * out.
 * This still leaves oracles with some risk due to TOCTOU issues.
 * However, since the sums involved are pretty small (Ethereum
 * transactions aren't that expensive in the end) and an oracle would
 * likely stop participating in a contract it repeatedly lost money on,
 * this risk is deemed acceptable. Oracles should also regularly
 * withdraw any funds in the contract to prevent issues where the
 * contract becomes underfunded at a later time, and different oracles
 * are competing for the left-over funds.
 * Finally, note that any change to the set of oracles or to the billing
 * parameters will trigger payout of all oracles first (using the old
 * parameters), a billing admin cannot take away funds that are already
 * marked for payment.
*/
contract OffchainAggregatorBilling is Owned {
  // Maximum number of oracles the offchain reporting protocol is designed for
  uint256 constant internal maxNumOracles = 31;
  // Parameters for oracle payments
  struct Billing {
    // Highest compensated gas price, in ETH-gwei uints
    uint32 maximumGasPrice;
    // If gas price is less (in ETH-gwei units), transmitter gets half the savings
    uint32 reasonableGasPrice;
    // Pay transmitter back this much LINK per unit eth spent on gas
    // (1e-6LINK/ETH units)
    uint32 microLinkPerEth;
    // Fixed LINK reward for each observer, in LINK-gwei units
    uint32 linkGweiPerObservation;
    // Fixed reward for transmitter, in linkGweiPerObservation units
    uint32 linkGweiPerTransmission;
  }
  Billing internal s_billing;
  // We assume that the token contract is correct. This contract is not written
  // to handle misbehaving ERC20 tokens!
  LinkTokenInterface internal s_linkToken;
  AccessControllerInterface internal s_billingAccessController;
  // ith element is number of observation rewards due to ith process, plus one.
  // This is expected to saturate after an oracle has submitted 65,535
  // observations, or about 65535/(3*24*20) = 45 days, given a transmission
  // every 3 minutes.
  //
  // This is always one greater than the actual value, so that when the value is
  // reset to zero, we don't end up with a zero value in storage (which would
  // result in a higher gas cost, the next time the value is incremented.)
  // Calculations using this variable need to take that offset into account.
  uint16[maxNumOracles] internal s_oracleObservationsCounts;
  // Addresses at which oracles want to receive payments, by transmitter address
  mapping (address /* transmitter */ => address /* payment address */)
    internal
    s_payees;
  // Payee addresses which must be approved by the owner
  mapping (address /* transmitter */ => address /* payment address */)
    internal
    s_proposedPayees;
  // LINK-wei-denominated reimbursements for gas used by transmitters.
  //
  // This is always one greater than the actual value, so that when the value is
  // reset to zero, we don't end up with a zero value in storage (which would
  // result in a higher gas cost, the next time the value is incremented.)
  // Calculations using this variable need to take that offset into account.
  //
  // Argument for overflow safety:
  // We have the following maximum intermediate values:
  // - 2**40 additions to this variable (epochAndRound is a uint40)
  // - 2**32 gas price in ethgwei/gas
  // - 1e9 ethwei/ethgwei
  // - 2**32 gas since the block gas limit is at ~20 million
  // - 2**32 (microlink/eth)
  // And we have 2**40 * 2**32 * 1e9 * 2**32 * 2**32 < 2**166
  // (we also divide in some places, but that only makes the value smaller)
  // We can thus safely use uint256 intermediate values for the computation
  // updating this variable.
  uint256[maxNumOracles] internal s_gasReimbursementsLinkWei;
  // Used for s_oracles[a].role, where a is an address, to track the purpose
  // of the address, or to indicate that the address is unset.
  enum Role {
    // No oracle role has been set for address a
    Unset,
    // Signing address for the s_oracles[a].index'th oracle. I.e., report
    // signatures from this oracle should ecrecover back to address a.
    Signer,
    // Transmission address for the s_oracles[a].index'th oracle. I.e., if a
    // report is received by OffchainAggregator.transmit in which msg.sender is
    // a, it is attributed to the s_oracles[a].index'th oracle.
    Transmitter
  }
  struct Oracle {
    uint8 index; // Index of oracle in s_signers/s_transmitters
    Role role;   // Role of the address which mapped to this struct
  }
  mapping (address /* signer OR transmitter address */ => Oracle)
    internal s_oracles;
  // s_signers contains the signing address of each oracle
  address[] internal s_signers;
  // s_transmitters contains the transmission address of each oracle,
  // i.e. the address the oracle actually sends transactions to the contract from
  address[] internal s_transmitters;
  uint256 constant private  maxUint16 = (1 << 16) - 1;
  uint256 constant internal maxUint128 = (1 << 128) - 1;
  constructor(
    uint32 _maximumGasPrice,
    uint32 _reasonableGasPrice,
    uint32 _microLinkPerEth,
    uint32 _linkGweiPerObservation,
    uint32 _linkGweiPerTransmission,
    LinkTokenInterface _link,
    AccessControllerInterface _billingAccessController
  )
  {
    setBillingInternal(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
      _linkGweiPerObservation, _linkGweiPerTransmission);
    s_linkToken = _link;
    emit LinkTokenSet(LinkTokenInterface(address(0)), _link);
    setBillingAccessControllerInternal(_billingAccessController);
    uint16[maxNumOracles] memory counts; // See s_oracleObservationsCounts docstring
    uint256[maxNumOracles] memory gas; // see s_gasReimbursementsLinkWei docstring
    for (uint8 i = 0; i < maxNumOracles; i++) {
      counts[i] = 1;
      gas[i] = 1;
    }
    s_oracleObservationsCounts = counts;
    s_gasReimbursementsLinkWei = gas;
  }
  /*
   * @notice emitted when the LINK token contract is set
   * @param _oldLinkToken the address of the old LINK token contract
   * @param _newLinkToken the address of the new LINK token contract
   */
  event LinkTokenSet(
    LinkTokenInterface indexed _oldLinkToken,
    LinkTokenInterface indexed _newLinkToken
  );
  /*
   * @notice sets the LINK token contract used for paying oracles
   * @param _linkToken the address of the LINK token contract
   * @param _recipient remaining funds from the previous token contract are transfered
   * here
   * @dev this function will return early (without an error) without changing any state
   * if _linkToken equals getLinkToken().
   * @dev this will trigger a payout so that a malicious owner cannot take from oracles
   * what is already owed to them.
   * @dev we assume that the token contract is correct. This contract is not written
   * to handle misbehaving ERC20 tokens!
   */
  function setLinkToken(
    LinkTokenInterface _linkToken,
    address _recipient
  ) external
    onlyOwner()
  {
    LinkTokenInterface oldLinkToken = s_linkToken;
    if (_linkToken == oldLinkToken) {
      // No change, nothing to be done
      return;
    }
    // call balanceOf as a sanity check on whether we're talking to a token
    // contract
    _linkToken.balanceOf(address(this));
    // we break CEI here, but that's okay because we're dealing with a correct
    // token contract (by assumption).
    payOracles();
    uint256 remainingBalance = oldLinkToken.balanceOf(address(this));
    require(oldLinkToken.transfer(_recipient, remainingBalance), "transfer remaining funds failed");
    s_linkToken = _linkToken;
    emit LinkTokenSet(oldLinkToken, _linkToken);
  }
  /*
   * @notice gets the LINK token contract used for paying oracles
   * @return linkToken the address of the LINK token contract
   */
  function getLinkToken()
    external
    view
    returns(LinkTokenInterface linkToken)
  {
    return s_linkToken;
  }
  /**
   * @notice emitted when billing parameters are set
   * @param maximumGasPrice highest gas price for which transmitter will be compensated
   * @param reasonableGasPrice transmitter will receive reward for gas prices under this value
   * @param microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
   * @param linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
   * @param linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
   */
  event BillingSet(
    uint32 maximumGasPrice,
    uint32 reasonableGasPrice,
    uint32 microLinkPerEth,
    uint32 linkGweiPerObservation,
    uint32 linkGweiPerTransmission
  );
  function setBillingInternal(
    uint32 _maximumGasPrice,
    uint32 _reasonableGasPrice,
    uint32 _microLinkPerEth,
    uint32 _linkGweiPerObservation,
    uint32 _linkGweiPerTransmission
  )
    internal
  {
    s_billing = Billing(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
      _linkGweiPerObservation, _linkGweiPerTransmission);
    emit BillingSet(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
      _linkGweiPerObservation, _linkGweiPerTransmission);
  }
  /**
   * @notice sets billing parameters
   * @param _maximumGasPrice highest gas price for which transmitter will be compensated
   * @param _reasonableGasPrice transmitter will receive reward for gas prices under this value
   * @param _microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
   * @param _linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
   * @param _linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
   * @dev access control provided by billingAccessController
   */
  function setBilling(
    uint32 _maximumGasPrice,
    uint32 _reasonableGasPrice,
    uint32 _microLinkPerEth,
    uint32 _linkGweiPerObservation,
    uint32 _linkGweiPerTransmission
  )
    external
  {
    AccessControllerInterface access = s_billingAccessController;
    require(msg.sender == owner || access.hasAccess(msg.sender, msg.data),
      "Only owner&billingAdmin can call");
    payOracles();
    setBillingInternal(_maximumGasPrice, _reasonableGasPrice, _microLinkPerEth,
      _linkGweiPerObservation, _linkGweiPerTransmission);
  }
  /**
   * @notice gets billing parameters
   * @param maximumGasPrice highest gas price for which transmitter will be compensated
   * @param reasonableGasPrice transmitter will receive reward for gas prices under this value
   * @param microLinkPerEth reimbursement per ETH of gas cost, in 1e-6LINK units
   * @param linkGweiPerObservation reward to oracle for contributing an observation to a successfully transmitted report, in 1e-9LINK units
   * @param linkGweiPerTransmission reward to transmitter of a successful report, in 1e-9LINK units
   */
  function getBilling()
    external
    view
    returns (
      uint32 maximumGasPrice,
      uint32 reasonableGasPrice,
      uint32 microLinkPerEth,
      uint32 linkGweiPerObservation,
      uint32 linkGweiPerTransmission
    )
  {
    Billing memory billing = s_billing;
    return (
      billing.maximumGasPrice,
      billing.reasonableGasPrice,
      billing.microLinkPerEth,
      billing.linkGweiPerObservation,
      billing.linkGweiPerTransmission
    );
  }
  /**
   * @notice emitted when a new access-control contract is set
   * @param old the address prior to the current setting
   * @param current the address of the new access-control contract
   */
  event BillingAccessControllerSet(AccessControllerInterface old, AccessControllerInterface current);
  function setBillingAccessControllerInternal(AccessControllerInterface _billingAccessController)
    internal
  {
    AccessControllerInterface oldController = s_billingAccessController;
    if (_billingAccessController != oldController) {
      s_billingAccessController = _billingAccessController;
      emit BillingAccessControllerSet(
        oldController,
        _billingAccessController
      );
    }
  }
  /**
   * @notice sets billingAccessController
   * @param _billingAccessController new billingAccessController contract address
   * @dev only owner can call this
   */
  function setBillingAccessController(AccessControllerInterface _billingAccessController)
    external
    onlyOwner
  {
    setBillingAccessControllerInternal(_billingAccessController);
  }
  /**
   * @notice gets billingAccessController
   * @return address of billingAccessController contract
   */
  function billingAccessController()
    external
    view
    returns (AccessControllerInterface)
  {
    return s_billingAccessController;
  }
  /**
   * @notice withdraws an oracle's payment from the contract
   * @param _transmitter the transmitter address of the oracle
   * @dev must be called by oracle's payee address
   */
  function withdrawPayment(address _transmitter)
    external
  {
    require(msg.sender == s_payees[_transmitter], "Only payee can withdraw");
    payOracle(_transmitter);
  }
  /**
   * @notice query an oracle's payment amount
   * @param _transmitter the transmitter address of the oracle
   */
  function owedPayment(address _transmitter)
    public
    view
    returns (uint256)
  {
    Oracle memory oracle = s_oracles[_transmitter];
    if (oracle.role == Role.Unset) { return 0; }
    Billing memory billing = s_billing;
    uint256 linkWeiAmount =
      uint256(s_oracleObservationsCounts[oracle.index] - 1) *
      uint256(billing.linkGweiPerObservation) *
      (1 gwei);
    linkWeiAmount += s_gasReimbursementsLinkWei[oracle.index] - 1;
    return linkWeiAmount;
  }
  /**
   * @notice emitted when an oracle has been paid LINK
   * @param transmitter address from which the oracle sends reports to the transmit method
   * @param payee address to which the payment is sent
   * @param amount amount of LINK sent
   * @param linkToken address of the LINK token contract
   */
  event OraclePaid(
    address indexed transmitter,
    address indexed payee,
    uint256 amount,
    LinkTokenInterface indexed linkToken
  );
  // payOracle pays out _transmitter's balance to the corresponding payee, and zeros it out
  function payOracle(address _transmitter)
    internal
  {
    Oracle memory oracle = s_oracles[_transmitter];
    uint256 linkWeiAmount = owedPayment(_transmitter);
    if (linkWeiAmount > 0) {
      address payee = s_payees[_transmitter];
      // Poses no re-entrancy issues, because LINK.transfer does not yield
      // control flow.
      require(s_linkToken.transfer(payee, linkWeiAmount), "insufficient funds");
      s_oracleObservationsCounts[oracle.index] = 1; // "zero" the counts. see var's docstring
      s_gasReimbursementsLinkWei[oracle.index] = 1; // "zero" the counts. see var's docstring
      emit OraclePaid(_transmitter, payee, linkWeiAmount, s_linkToken);
    }
  }
  // payOracles pays out all transmitters, and zeros out their balances.
  //
  // It's much more gas-efficient to do this as a single operation, to avoid
  // hitting storage too much.
  function payOracles()
    internal
  {
    Billing memory billing = s_billing;
    LinkTokenInterface linkToken = s_linkToken;
    uint16[maxNumOracles] memory observationsCounts = s_oracleObservationsCounts;
    uint256[maxNumOracles] memory gasReimbursementsLinkWei =
      s_gasReimbursementsLinkWei;
    address[] memory transmitters = s_transmitters;
    for (uint transmitteridx = 0; transmitteridx < transmitters.length; transmitteridx++) {
      uint256 reimbursementAmountLinkWei = gasReimbursementsLinkWei[transmitteridx] - 1;
      uint256 obsCount = observationsCounts[transmitteridx] - 1;
      uint256 linkWeiAmount =
        obsCount * uint256(billing.linkGweiPerObservation) * (1 gwei) + reimbursementAmountLinkWei;
      if (linkWeiAmount > 0) {
          address payee = s_payees[transmitters[transmitteridx]];
          // Poses no re-entrancy issues, because LINK.transfer does not yield
          // control flow.
          require(linkToken.transfer(payee, linkWeiAmount), "insufficient funds");
          observationsCounts[transmitteridx] = 1;       // "zero" the counts.
          gasReimbursementsLinkWei[transmitteridx] = 1; // "zero" the counts.
          emit OraclePaid(transmitters[transmitteridx], payee, linkWeiAmount, linkToken);
        }
    }
    // "Zero" the accounting storage variables
    s_oracleObservationsCounts = observationsCounts;
    s_gasReimbursementsLinkWei = gasReimbursementsLinkWei;
  }
  function oracleRewards(
    bytes memory observers,
    uint16[maxNumOracles] memory observations
  )
    internal
    pure
    returns (uint16[maxNumOracles] memory)
  {
    // reward each observer-participant with the observer reward
    for (uint obsIdx = 0; obsIdx < observers.length; obsIdx++) {
      uint8 observer = uint8(observers[obsIdx]);
      observations[observer] = saturatingAddUint16(observations[observer], 1);
    }
    return observations;
  }
  // This value needs to change if maxNumOracles is increased, or the accounting
  // calculations at the bottom of reimburseAndRewardOracles change.
  //
  // To recalculate it, run the profiler as described in
  // ../../profile/README.md, and add up the gas-usage values reported for the
  // lines in reimburseAndRewardOracles following the "gasLeft = gasleft()"
  // line. E.g., you will see output like this:
  //
  //      7        uint256 gasLeft = gasleft();
  //     29        uint256 gasCostEthWei = transmitterGasCostEthWei(
  //      9          uint256(initialGas),
  //      3          gasPrice,
  //      3          callDataGasCost,
  //      3          gasLeft
  //      .
  //      .
  //      .
  //     59        uint256 gasCostLinkWei = (gasCostEthWei * billing.microLinkPerEth)/ 1e6;
  //      .
  //      .
  //      .
  //   5047        s_gasReimbursementsLinkWei[txOracle.index] =
  //    856          s_gasReimbursementsLinkWei[txOracle.index] + gasCostLinkWei +
  //     26          uint256(billing.linkGweiPerTransmission) * (1 gwei);
  //
  // If those were the only lines to be accounted for, you would add up
  // 29+9+3+3+3+59+5047+856+26=6035.
  uint256 internal constant accountingGasCost = 6035;
  // Uncomment the following declaration to compute the remaining gas cost after
  // above gasleft(). (This must exist in a base class to OffchainAggregator, so
  // it can't go in TestOffchainAggregator.)
  //
  // uint256 public gasUsedInAccounting;
  // Gas price at which the transmitter should be reimbursed, in ETH-gwei/gas
  function impliedGasPrice(
    uint256 txGasPrice,         // ETH-gwei/gas units
    uint256 reasonableGasPrice, // ETH-gwei/gas units
    uint256 maximumGasPrice     // ETH-gwei/gas units
  )
    internal
    pure
    returns (uint256)
  {
    // Reward the transmitter for choosing an efficient gas price: if they manage
    // to come in lower than considered reasonable, give them half the savings.
    //
    // The following calculations are all in units of gwei/gas, i.e. 1e-9ETH/gas
    uint256 gasPrice = txGasPrice;
    if (txGasPrice < reasonableGasPrice) {
      // Give transmitter half the savings for coming in under the reasonable gas price
      gasPrice += (reasonableGasPrice - txGasPrice) / 2;
    }
    // Don't reimburse a gas price higher than maximumGasPrice
    return min(gasPrice, maximumGasPrice);
  }
  // gas reimbursement due the transmitter, in ETH-wei
  //
  // If this function is changed, accountingGasCost needs to change, too. See
  // its docstring
  function transmitterGasCostEthWei(
    uint256 initialGas,
    uint256 gasPrice, // ETH-gwei/gas units
    uint256 callDataCost, // gas units
    uint256 gasLeft
  )
    internal
    pure
    returns (uint128 gasCostEthWei)
  {
    require(initialGas >= gasLeft, "gasLeft cannot exceed initialGas");
    uint256 gasUsed = // gas units
      initialGas - gasLeft + // observed gas usage
      callDataCost + accountingGasCost; // estimated gas usage
    // gasUsed is in gas units, gasPrice is in ETH-gwei/gas units; convert to ETH-wei
    uint256 fullGasCostEthWei = gasUsed * gasPrice * (1 gwei);
    assert(fullGasCostEthWei < maxUint128); // the entire ETH supply fits in a uint128...
    return uint128(fullGasCostEthWei);
  }
  /**
   * @notice withdraw any available funds left in the contract, up to _amount, after accounting for the funds due to participants in past reports
   * @param _recipient address to send funds to
   * @param _amount maximum amount to withdraw, denominated in LINK-wei.
   * @dev access control provided by billingAccessController
   */
  function withdrawFunds(address _recipient, uint256 _amount)
    external
  {
    require(msg.sender == owner || s_billingAccessController.hasAccess(msg.sender, msg.data),
      "Only owner&billingAdmin can call");
    uint256 linkDue = totalLINKDue();
    uint256 linkBalance = s_linkToken.balanceOf(address(this));
    require(linkBalance >= linkDue, "insufficient balance");
    require(s_linkToken.transfer(_recipient, min(linkBalance - linkDue, _amount)), "insufficient funds");
  }
  // Total LINK due to participants in past reports.
  function totalLINKDue()
    internal
    view
    returns (uint256 linkDue)
  {
    // Argument for overflow safety: We do all computations in
    // uint256s. The inputs to linkDue are:
    // - the <= 31 observation rewards each of which has less than
    //   64 bits (32 bits for billing.linkGweiPerObservation, 32 bits
    //   for wei/gwei conversion). Hence 69 bits are sufficient for this part.
    // - the <= 31 gas reimbursements, each of which consists of at most 166
    //   bits (see s_gasReimbursementsLinkWei docstring). Hence 171 bits are
    //   sufficient for this part
    // In total, 172 bits are enough.
    uint16[maxNumOracles] memory observationCounts = s_oracleObservationsCounts;
    for (uint i = 0; i < maxNumOracles; i++) {
      linkDue += observationCounts[i] - 1; // Stored value is one greater than actual value
    }
    Billing memory billing = s_billing;
    // Convert linkGweiPerObservation to uint256, or this overflows!
    linkDue *= uint256(billing.linkGweiPerObservation) * (1 gwei);
    address[] memory transmitters = s_transmitters;
    uint256[maxNumOracles] memory gasReimbursementsLinkWei =
      s_gasReimbursementsLinkWei;
    for (uint i = 0; i < transmitters.length; i++) {
      linkDue += uint256(gasReimbursementsLinkWei[i]-1); // Stored value is one greater than actual value
    }
  }
  /**
   * @notice allows oracles to check that sufficient LINK balance is available
   * @return availableBalance LINK available on this contract, after accounting for outstanding obligations. can become negative
   */
  function linkAvailableForPayment()
    external
    view
    returns (int256 availableBalance)
  {
    // there are at most one billion LINK, so this cast is safe
    int256 balance = int256(s_linkToken.balanceOf(address(this)));
    // according to the argument in the definition of totalLINKDue,
    // totalLINKDue is never greater than 2**172, so this cast is safe
    int256 due = int256(totalLINKDue());
    // safe from overflow according to above sizes
    return int256(balance) - int256(due);
  }
  /**
   * @notice number of observations oracle is due to be reimbursed for
   * @param _signerOrTransmitter address used by oracle for signing or transmitting reports
   */
  function oracleObservationCount(address _signerOrTransmitter)
    external
    view
    returns (uint16)
  {
    Oracle memory oracle = s_oracles[_signerOrTransmitter];
    if (oracle.role == Role.Unset) { return 0; }
    return s_oracleObservationsCounts[oracle.index] - 1;
  }
  function reimburseAndRewardOracles(
    uint32 initialGas,
    bytes memory observers
  )
    internal
  {
    Oracle memory txOracle = s_oracles[msg.sender];
    Billing memory billing = s_billing;
    // Reward oracles for providing observations. Oracles are not rewarded
    // for providing signatures, because signing is essentially free.
    s_oracleObservationsCounts =
      oracleRewards(observers, s_oracleObservationsCounts);
    // Reimburse transmitter of the report for gas usage
    require(txOracle.role == Role.Transmitter,
      "sent by undesignated transmitter"
    );
    uint256 gasPrice = impliedGasPrice(
      tx.gasprice / (1 gwei), // convert to ETH-gwei units
      billing.reasonableGasPrice,
      billing.maximumGasPrice
    );
    // The following is only an upper bound, as it ignores the cheaper cost for
    // 0 bytes. Safe from overflow, because calldata just isn't that long.
    uint256 callDataGasCost = 16 * msg.data.length;
    // If any changes are made to subsequent calculations, accountingGasCost
    // needs to change, too.
    uint256 gasLeft = gasleft();
    uint256 gasCostEthWei = transmitterGasCostEthWei(
      uint256(initialGas),
      gasPrice,
      callDataGasCost,
      gasLeft
    );
    // microLinkPerEth is 1e-6LINK/ETH units, gasCostEthWei is 1e-18ETH units
    // (ETH-wei), product is 1e-24LINK-wei units, dividing by 1e6 gives
    // 1e-18LINK units, i.e. LINK-wei units
    // Safe from over/underflow, since all components are non-negative,
    // gasCostEthWei will always fit into uint128 and microLinkPerEth is a
    // uint32 (128+32 < 256!).
    uint256 gasCostLinkWei = (gasCostEthWei * billing.microLinkPerEth)/ 1e6;
    // Safe from overflow, because gasCostLinkWei < 2**160 and
    // billing.linkGweiPerTransmission * (1 gwei) < 2**64 and we increment
    // s_gasReimbursementsLinkWei[txOracle.index] at most 2**40 times.
    s_gasReimbursementsLinkWei[txOracle.index] =
      s_gasReimbursementsLinkWei[txOracle.index] + gasCostLinkWei +
      uint256(billing.linkGweiPerTransmission) * (1 gwei); // convert from linkGwei to linkWei
    // Uncomment next line to compute the remaining gas cost after above gasleft().
    // See OffchainAggregatorBilling.accountingGasCost docstring for more information.
    //
    // gasUsedInAccounting = gasLeft - gasleft();
  }
  /*
   * Payee management
   */
  /**
   * @notice emitted when a transfer of an oracle's payee address has been initiated
   * @param transmitter address from which the oracle sends reports to the transmit method
   * @param current the payeee address for the oracle, prior to this setting
   * @param proposed the proposed new payee address for the oracle
   */
  event PayeeshipTransferRequested(
    address indexed transmitter,
    address indexed current,
    address indexed proposed
  );
  /**
   * @notice emitted when a transfer of an oracle's payee address has been completed
   * @param transmitter address from which the oracle sends reports to the transmit method
   * @param current the payeee address for the oracle, prior to this setting
   */
  event PayeeshipTransferred(
    address indexed transmitter,
    address indexed previous,
    address indexed current
  );
  /**
   * @notice sets the payees for transmitting addresses
   * @param _transmitters addresses oracles use to transmit the reports
   * @param _payees addresses of payees corresponding to list of transmitters
   * @dev must be called by owner
   * @dev cannot be used to change payee addresses, only to initially populate them
   */
  function setPayees(
    address[] calldata _transmitters,
    address[] calldata _payees
  )
    external
    onlyOwner()
  {
    require(_transmitters.length == _payees.length, "transmitters.size != payees.size");
    for (uint i = 0; i < _transmitters.length; i++) {
      address transmitter = _transmitters[i];
      address payee = _payees[i];
      address currentPayee = s_payees[transmitter];
      bool zeroedOut = currentPayee == address(0);
      require(zeroedOut || currentPayee == payee, "payee already set");
      s_payees[transmitter] = payee;
      if (currentPayee != payee) {
        emit PayeeshipTransferred(transmitter, currentPayee, payee);
      }
    }
  }
  /**
   * @notice first step of payeeship transfer (safe transfer pattern)
   * @param _transmitter transmitter address of oracle whose payee is changing
   * @param _proposed new payee address
   * @dev can only be called by payee address
   */
  function transferPayeeship(
    address _transmitter,
    address _proposed
  )
    external
  {
      require(msg.sender == s_payees[_transmitter], "only current payee can update");
      require(msg.sender != _proposed, "cannot transfer to self");
      address previousProposed = s_proposedPayees[_transmitter];
      s_proposedPayees[_transmitter] = _proposed;
      if (previousProposed != _proposed) {
        emit PayeeshipTransferRequested(_transmitter, msg.sender, _proposed);
      }
  }
  /**
   * @notice second step of payeeship transfer (safe transfer pattern)
   * @param _transmitter transmitter address of oracle whose payee is changing
   * @dev can only be called by proposed new payee address
   */
  function acceptPayeeship(
    address _transmitter
  )
    external
  {
    require(msg.sender == s_proposedPayees[_transmitter], "only proposed payees can accept");
    address currentPayee = s_payees[_transmitter];
    s_payees[_transmitter] = msg.sender;
    s_proposedPayees[_transmitter] = address(0);
    emit PayeeshipTransferred(_transmitter, currentPayee, msg.sender);
  }
  /*
   * Helper functions
   */
  function saturatingAddUint16(uint16 _x, uint16 _y)
    internal
    pure
    returns (uint16)
  {
    return uint16(min(uint256(_x)+uint256(_y), maxUint16));
  }
  function min(uint256 a, uint256 b)
    internal
    pure
    returns (uint256)
  {
    if (a < b) { return a; }
    return b;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.7.6;
/**
 * @title The Owned contract
 * @notice A contract with helpers for basic contract ownership.
 */
contract Owned {
  address payable public owner;
  address private pendingOwner;
  event OwnershipTransferRequested(
    address indexed from,
    address indexed to
  );
  event OwnershipTransferred(
    address indexed from,
    address indexed to
  );
  constructor() {
    owner = msg.sender;
  }
  /**
   * @dev Allows an owner to begin transferring ownership to a new address,
   * pending.
   */
  function transferOwnership(address _to)
    external
    onlyOwner()
  {
    pendingOwner = _to;
    emit OwnershipTransferRequested(owner, _to);
  }
  /**
   * @dev Allows an ownership transfer to be completed by the recipient.
   */
  function acceptOwnership()
    external
  {
    require(msg.sender == pendingOwner, "Must be proposed owner");
    address oldOwner = owner;
    owner = msg.sender;
    pendingOwner = address(0);
    emit OwnershipTransferred(oldOwner, msg.sender);
  }
  /**
   * @dev Reverts if called by anyone other than the contract owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner, "Only callable by owner");
    _;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.7.6;
import "./SimpleWriteAccessController.sol";
/**
 * @title SimpleReadAccessController
 * @notice Gives access to:
 * - any externally owned account (note that offchain actors can always read
 * any contract storage regardless of onchain access control measures, so this
 * does not weaken the access control while improving usability)
 * - accounts explicitly added to an access list
 * @dev SimpleReadAccessController is not suitable for access controlling writes
 * since it grants any externally owned account access! See
 * SimpleWriteAccessController for that.
 */
contract SimpleReadAccessController is SimpleWriteAccessController {
  /**
   * @notice Returns the access of an address
   * @param _user The address to query
   */
  function hasAccess(
    address _user,
    bytes memory _calldata
  )
    public
    view
    virtual
    override
    returns (bool)
  {
    return super.hasAccess(_user, _calldata) || _user == tx.origin;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.7.6;
import "./Owned.sol";
import "./AccessControllerInterface.sol";
/**
 * @title SimpleWriteAccessController
 * @notice Gives access to accounts explicitly added to an access list by the
 * controller's owner.
 * @dev does not make any special permissions for externally, see
 * SimpleReadAccessController for that.
 */
contract SimpleWriteAccessController is AccessControllerInterface, Owned {
  bool public checkEnabled;
  mapping(address => bool) internal accessList;
  event AddedAccess(address user);
  event RemovedAccess(address user);
  event CheckAccessEnabled();
  event CheckAccessDisabled();
  constructor()
  {
    checkEnabled = true;
  }
  /**
   * @notice Returns the access of an address
   * @param _user The address to query
   */
  function hasAccess(
    address _user,
    bytes memory
  )
    public
    view
    virtual
    override
    returns (bool)
  {
    return accessList[_user] || !checkEnabled;
  }
  /**
   * @notice Adds an address to the access list
   * @param _user The address to add
   */
  function addAccess(address _user) external onlyOwner() {
    addAccessInternal(_user);
  }
  function addAccessInternal(address _user) internal {
    if (!accessList[_user]) {
      accessList[_user] = true;
      emit AddedAccess(_user);
    }
  }
  /**
   * @notice Removes an address from the access list
   * @param _user The address to remove
   */
  function removeAccess(address _user)
    external
    onlyOwner()
  {
    if (accessList[_user]) {
      accessList[_user] = false;
      emit RemovedAccess(_user);
    }
  }
  /**
   * @notice makes the access check enforced
   */
  function enableAccessCheck()
    external
    onlyOwner()
  {
    if (!checkEnabled) {
      checkEnabled = true;
      emit CheckAccessEnabled();
    }
  }
  /**
   * @notice makes the access check unenforced
   */
  function disableAccessCheck()
    external
    onlyOwner()
  {
    if (checkEnabled) {
      checkEnabled = false;
      emit CheckAccessDisabled();
    }
  }
  /**
   * @dev reverts if the caller does not have access
   */
  modifier checkAccess() {
    require(hasAccess(msg.sender, msg.data), "No access");
    _;
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
abstract contract TypeAndVersionInterface{
  function typeAndVersion()
    external
    pure
    virtual
    returns (string memory);
}