// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title IL1ChugSplashDeployer
 */
interface IL1ChugSplashDeployer {
    function isUpgrading() external view returns (bool);
}
/**
 * @custom:legacy
 * @title L1ChugSplashProxy
 * @notice Basic ChugSplash proxy contract for L1. Very close to being a normal proxy but has added
 *         functions `setCode` and `setStorage` for changing the code or storage of the contract.
 *
 *         Note for future developers: do NOT make anything in this contract 'public' unless you
 *         know what you're doing. Anything public can potentially have a function signature that
 *         conflicts with a signature attached to the implementation contract. Public functions
 *         SHOULD always have the `proxyCallIfNotOwner` modifier unless there's some *really* good
 *         reason not to have that modifier. And there almost certainly is not a good reason to not
 *         have that modifier. Beware!
 */
contract L1ChugSplashProxy {
    /**
     * @notice "Magic" prefix. When prepended to some arbitrary bytecode and used to create a
     *         contract, the appended bytecode will be deployed as given.
     */
    bytes13 internal constant DEPLOY_CODE_PREFIX = 0x600D380380600D6000396000f3;
    /**
     * @notice bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice Blocks a function from being called when the parent signals that the system should
     *         be paused via an isUpgrading function.
     */
    modifier onlyWhenNotPaused() {
        address owner = _getOwner();
        // We do a low-level call because there's no guarantee that the owner actually *is* an
        // L1ChugSplashDeployer contract and Solidity will throw errors if we do a normal call and
        // it turns out that it isn't the right type of contract.
        (bool success, bytes memory returndata) = owner.staticcall(
            abi.encodeWithSelector(IL1ChugSplashDeployer.isUpgrading.selector)
        );
        // If the call was unsuccessful then we assume that there's no "isUpgrading" method and we
        // can just continue as normal. We also expect that the return value is exactly 32 bytes
        // long. If this isn't the case then we can safely ignore the result.
        if (success && returndata.length == 32) {
            // Although the expected value is a *boolean*, it's safer to decode as a uint256 in the
            // case that the isUpgrading function returned something other than 0 or 1. But we only
            // really care about the case where this value is 0 (= false).
            uint256 ret = abi.decode(returndata, (uint256));
            require(ret == 0, "L1ChugSplashProxy: system is currently being upgraded");
        }
        _;
    }
    /**
     * @notice Makes a proxy call instead of triggering the given function when the caller is
     *         either the owner or the zero address. Caller can only ever be the zero address if
     *         this function is being called off-chain via eth_call, which is totally fine and can
     *         be convenient for client-side tooling. Avoids situations where the proxy and
     *         implementation share a sighash and the proxy function ends up being called instead
     *         of the implementation one.
     *
     *         Note: msg.sender == address(0) can ONLY be triggered off-chain via eth_call. If
     *         there's a way for someone to send a transaction with msg.sender == address(0) in any
     *         real context then we have much bigger problems. Primary reason to include this
     *         additional allowed sender is because the owner address can be changed dynamically
     *         and we do not want clients to have to keep track of the current owner in order to
     *         make an eth_call that doesn't trigger the proxied contract.
     */
    // slither-disable-next-line incorrect-modifier
    modifier proxyCallIfNotOwner() {
        if (msg.sender == _getOwner() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @param _owner Address of the initial contract owner.
     */
    constructor(address _owner) {
        _setOwner(_owner);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Sets the code that should be running behind this proxy.
     *
     *         Note: This scheme is a bit different from the standard proxy scheme where one would
     *         typically deploy the code separately and then set the implementation address. We're
     *         doing it this way because it gives us a lot more freedom on the client side. Can
     *         only be triggered by the contract owner.
     *
     * @param _code New contract code to run inside this contract.
     */
    function setCode(bytes memory _code) external proxyCallIfNotOwner {
        // Get the code hash of the current implementation.
        address implementation = _getImplementation();
        // If the code hash matches the new implementation then we return early.
        if (keccak256(_code) == _getAccountCodeHash(implementation)) {
            return;
        }
        // Create the deploycode by appending the magic prefix.
        bytes memory deploycode = abi.encodePacked(DEPLOY_CODE_PREFIX, _code);
        // Deploy the code and set the new implementation address.
        address newImplementation;
        assembly {
            newImplementation := create(0x0, add(deploycode, 0x20), mload(deploycode))
        }
        // Check that the code was actually deployed correctly. I'm not sure if you can ever
        // actually fail this check. Should only happen if the contract creation from above runs
        // out of gas but this parent execution thread does NOT run out of gas. Seems like we
        // should be doing this check anyway though.
        require(
            _getAccountCodeHash(newImplementation) == keccak256(_code),
            "L1ChugSplashProxy: code was not correctly deployed"
        );
        _setImplementation(newImplementation);
    }
    /**
     * @notice Modifies some storage slot within the proxy contract. Gives us a lot of power to
     *         perform upgrades in a more transparent way. Only callable by the owner.
     *
     * @param _key   Storage key to modify.
     * @param _value New value for the storage key.
     */
    function setStorage(bytes32 _key, bytes32 _value) external proxyCallIfNotOwner {
        assembly {
            sstore(_key, _value)
        }
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _owner New owner of the proxy contract.
     */
    function setOwner(address _owner) external proxyCallIfNotOwner {
        _setOwner(_owner);
    }
    /**
     * @notice Queries the owner of the proxy contract. Can only be called by the owner OR by
     *         making an eth_call and setting the "from" address to address(0).
     *
     * @return Owner address.
     */
    function getOwner() external proxyCallIfNotOwner returns (address) {
        return _getOwner();
    }
    /**
     * @notice Queries the implementation address. Can only be called by the owner OR by making an
     *         eth_call and setting the "from" address to address(0).
     *
     * @return Implementation address.
     */
    function getImplementation() external proxyCallIfNotOwner returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _owner New owner of the proxy contract.
     */
    function _setOwner(address _owner) internal {
        assembly {
            sstore(OWNER_KEY, _owner)
        }
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal onlyWhenNotPaused {
        address implementation = _getImplementation();
        require(implementation != address(0), "L1ChugSplashProxy: implementation is not set yet");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), implementation, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address implementation;
        assembly {
            implementation := sload(IMPLEMENTATION_KEY)
        }
        return implementation;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getOwner() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
    /**
     * @notice Gets the code hash for a given account.
     *
     * @param _account Address of the account to get a code hash for.
     *
     * @return Code hash for the account.
     */
    function _getAccountCodeHash(address _account) internal view returns (bytes32) {
        bytes32 codeHash;
        assembly {
            codeHash := extcodehash(_account)
        }
        return codeHash;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title Proxy
 * @notice Proxy is a transparent proxy that passes through the call if the caller is the owner or
 *         if the caller is address(0), meaning that the call originated from an off-chain
 *         simulation.
 */
contract Proxy {
    /**
     * @notice The storage slot that holds the address of the implementation.
     *         bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice The storage slot that holds the address of the owner.
     *         bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice An event that is emitted each time the implementation is changed. This event is part
     *         of the EIP-1967 specification.
     *
     * @param implementation The address of the implementation contract
     */
    event Upgraded(address indexed implementation);
    /**
     * @notice An event that is emitted each time the owner is upgraded. This event is part of the
     *         EIP-1967 specification.
     *
     * @param previousAdmin The previous owner of the contract
     * @param newAdmin      The new owner of the contract
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @notice A modifier that reverts if not called by the owner or by address(0) to allow
     *         eth_call to interact with this proxy without needing to use low-level storage
     *         inspection. We assume that nobody is able to trigger calls from address(0) during
     *         normal EVM execution.
     */
    modifier proxyCallIfNotAdmin() {
        if (msg.sender == _getAdmin() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @notice Sets the initial admin during contract deployment. Admin address is stored at the
     *         EIP-1967 admin storage slot so that accidental storage collision with the
     *         implementation is not possible.
     *
     * @param _admin Address of the initial contract admin. Admin as the ability to access the
     *               transparent proxy interface.
     */
    constructor(address _admin) {
        _changeAdmin(_admin);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Set the implementation contract address. The code at the given address will execute
     *         when this contract is called.
     *
     * @param _implementation Address of the implementation contract.
     */
    function upgradeTo(address _implementation) public virtual proxyCallIfNotAdmin {
        _setImplementation(_implementation);
    }
    /**
     * @notice Set the implementation and call a function in a single transaction. Useful to ensure
     *         atomic execution of initialization-based upgrades.
     *
     * @param _implementation Address of the implementation contract.
     * @param _data           Calldata to delegatecall the new implementation with.
     */
    function upgradeToAndCall(address _implementation, bytes calldata _data)
        public
        payable
        virtual
        proxyCallIfNotAdmin
        returns (bytes memory)
    {
        _setImplementation(_implementation);
        (bool success, bytes memory returndata) = _implementation.delegatecall(_data);
        require(success, "Proxy: delegatecall to new implementation contract failed");
        return returndata;
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _admin New owner of the proxy contract.
     */
    function changeAdmin(address _admin) public virtual proxyCallIfNotAdmin {
        _changeAdmin(_admin);
    }
    /**
     * @notice Gets the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function admin() public virtual proxyCallIfNotAdmin returns (address) {
        return _getAdmin();
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function implementation() public virtual proxyCallIfNotAdmin returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
        emit Upgraded(_implementation);
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _admin New owner of the proxy contract.
     */
    function _changeAdmin(address _admin) internal {
        address previous = _getAdmin();
        assembly {
            sstore(OWNER_KEY, _admin)
        }
        emit AdminChanged(previous, _admin);
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal {
        address impl = _getImplementation();
        require(impl != address(0), "Proxy: implementation not initialized");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), impl, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address impl;
        assembly {
            impl := sload(IMPLEMENTATION_KEY)
        }
        return impl;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getAdmin() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { AddressManager } from "./AddressManager.sol";
/**
 * @custom:legacy
 * @title ResolvedDelegateProxy
 * @notice ResolvedDelegateProxy is a legacy proxy contract that makes use of the AddressManager to
 *         resolve the implementation address. We're maintaining this contract for backwards
 *         compatibility so we can manage all legacy proxies where necessary.
 */
contract ResolvedDelegateProxy {
    /**
     * @notice Mapping used to store the implementation name that corresponds to this contract. A
     *         mapping was originally used as a way to bypass the same issue normally solved by
     *         storing the implementation address in a specific storage slot that does not conflict
     *         with any other storage slot. Generally NOT a safe solution but works as long as the
     *         implementation does not also keep a mapping in the first storage slot.
     */
    mapping(address => string) private implementationName;
    /**
     * @notice Mapping used to store the address of the AddressManager contract where the
     *         implementation address will be resolved from. Same concept here as with the above
     *         mapping. Also generally unsafe but fine if the implementation doesn't keep a mapping
     *         in the second storage slot.
     */
    mapping(address => AddressManager) private addressManager;
    /**
     * @param _addressManager  Address of the AddressManager.
     * @param _implementationName implementationName of the contract to proxy to.
     */
    constructor(AddressManager _addressManager, string memory _implementationName) {
        addressManager[address(this)] = _addressManager;
        implementationName[address(this)] = _implementationName;
    }
    /**
     * @notice Fallback, performs a delegatecall to the resolved implementation address.
     */
    // solhint-disable-next-line no-complex-fallback
    fallback() external payable {
        address target = addressManager[address(this)].getAddress(
            (implementationName[address(this)])
        );
        require(target != address(0), "ResolvedDelegateProxy: target address must be initialized");
        // slither-disable-next-line controlled-delegatecall
        (bool success, bytes memory returndata) = target.delegatecall(msg.data);
        if (success == true) {
            assembly {
                return(add(returndata, 0x20), mload(returndata))
            }
        } else {
            assembly {
                revert(add(returndata, 0x20), mload(returndata))
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
 * @custom:legacy
 * @title AddressManager
 * @notice AddressManager is a legacy contract that was used in the old version of the Optimism
 *         system to manage a registry of string names to addresses. We now use a more standard
 *         proxy system instead, but this contract is still necessary for backwards compatibility
 *         with several older contracts.
 */
contract AddressManager is Ownable {
    /**
     * @notice Mapping of the hashes of string names to addresses.
     */
    mapping(bytes32 => address) private addresses;
    /**
     * @notice Emitted when an address is modified in the registry.
     *
     * @param name       String name being set in the registry.
     * @param newAddress Address set for the given name.
     * @param oldAddress Address that was previously set for the given name.
     */
    event AddressSet(string indexed name, address newAddress, address oldAddress);
    /**
     * @notice Changes the address associated with a particular name.
     *
     * @param _name    String name to associate an address with.
     * @param _address Address to associate with the name.
     */
    function setAddress(string memory _name, address _address) external onlyOwner {
        bytes32 nameHash = _getNameHash(_name);
        address oldAddress = addresses[nameHash];
        addresses[nameHash] = _address;
        emit AddressSet(_name, _address, oldAddress);
    }
    /**
     * @notice Retrieves the address associated with a given name.
     *
     * @param _name Name to retrieve an address for.
     *
     * @return Address associated with the given name.
     */
    function getAddress(string memory _name) external view returns (address) {
        return addresses[_getNameHash(_name)];
    }
    /**
     * @notice Computes the hash of a name.
     *
     * @param _name Name to compute a hash for.
     *
     * @return Hash of the given name.
     */
    function _getNameHash(string memory _name) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(_name));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { Proxy } from "./Proxy.sol";
import { AddressManager } from "../legacy/AddressManager.sol";
import { L1ChugSplashProxy } from "../legacy/L1ChugSplashProxy.sol";
/**
 * @title IStaticERC1967Proxy
 * @notice IStaticERC1967Proxy is a static version of the ERC1967 proxy interface.
 */
interface IStaticERC1967Proxy {
    function implementation() external view returns (address);
    function admin() external view returns (address);
}
/**
 * @title IStaticL1ChugSplashProxy
 * @notice IStaticL1ChugSplashProxy is a static version of the ChugSplash proxy interface.
 */
interface IStaticL1ChugSplashProxy {
    function getImplementation() external view returns (address);
    function getOwner() external view returns (address);
}
/**
 * @title ProxyAdmin
 * @notice This is an auxiliary contract meant to be assigned as the admin of an ERC1967 Proxy,
 *         based on the OpenZeppelin implementation. It has backwards compatibility logic to work
 *         with the various types of proxies that have been deployed by Optimism in the past.
 */
contract ProxyAdmin is Ownable {
    /**
     * @notice The proxy types that the ProxyAdmin can manage.
     *
     * @custom:value ERC1967    Represents an ERC1967 compliant transparent proxy interface.
     * @custom:value CHUGSPLASH Represents the Chugsplash proxy interface (legacy).
     * @custom:value RESOLVED   Represents the ResolvedDelegate proxy (legacy).
     */
    enum ProxyType {
        ERC1967,
        CHUGSPLASH,
        RESOLVED
    }
    /**
     * @notice A mapping of proxy types, used for backwards compatibility.
     */
    mapping(address => ProxyType) public proxyType;
    /**
     * @notice A reverse mapping of addresses to names held in the AddressManager. This must be
     *         manually kept up to date with changes in the AddressManager for this contract
     *         to be able to work as an admin for the ResolvedDelegateProxy type.
     */
    mapping(address => string) public implementationName;
    /**
     * @notice The address of the address manager, this is required to manage the
     *         ResolvedDelegateProxy type.
     */
    AddressManager public addressManager;
    /**
     * @notice A legacy upgrading indicator used by the old Chugsplash Proxy.
     */
    bool internal upgrading;
    /**
     * @param _owner Address of the initial owner of this contract.
     */
    constructor(address _owner) Ownable() {
        _transferOwnership(_owner);
    }
    /**
     * @notice Sets the proxy type for a given address. Only required for non-standard (legacy)
     *         proxy types.
     *
     * @param _address Address of the proxy.
     * @param _type    Type of the proxy.
     */
    function setProxyType(address _address, ProxyType _type) external onlyOwner {
        proxyType[_address] = _type;
    }
    /**
     * @notice Sets the implementation name for a given address. Only required for
     *         ResolvedDelegateProxy type proxies that have an implementation name.
     *
     * @param _address Address of the ResolvedDelegateProxy.
     * @param _name    Name of the implementation for the proxy.
     */
    function setImplementationName(address _address, string memory _name) external onlyOwner {
        implementationName[_address] = _name;
    }
    /**
     * @notice Set the address of the AddressManager. This is required to manage legacy
     *         ResolvedDelegateProxy type proxy contracts.
     *
     * @param _address Address of the AddressManager.
     */
    function setAddressManager(AddressManager _address) external onlyOwner {
        addressManager = _address;
    }
    /**
     * @custom:legacy
     * @notice Set an address in the address manager. Since only the owner of the AddressManager
     *         can directly modify addresses and the ProxyAdmin will own the AddressManager, this
     *         gives the owner of the ProxyAdmin the ability to modify addresses directly.
     *
     * @param _name    Name to set within the AddressManager.
     * @param _address Address to attach to the given name.
     */
    function setAddress(string memory _name, address _address) external onlyOwner {
        addressManager.setAddress(_name, _address);
    }
    /**
     * @custom:legacy
     * @notice Set the upgrading status for the Chugsplash proxy type.
     *
     * @param _upgrading Whether or not the system is upgrading.
     */
    function setUpgrading(bool _upgrading) external onlyOwner {
        upgrading = _upgrading;
    }
    /**
     * @custom:legacy
     * @notice Legacy function used to tell ChugSplashProxy contracts if an upgrade is happening.
     *
     * @return Whether or not there is an upgrade going on. May not actually tell you whether an
     *         upgrade is going on, since we don't currently plan to use this variable for anything
     *         other than a legacy indicator to fix a UX bug in the ChugSplash proxy.
     */
    function isUpgrading() external view returns (bool) {
        return upgrading;
    }
    /**
     * @notice Returns the implementation of the given proxy address.
     *
     * @param _proxy Address of the proxy to get the implementation of.
     *
     * @return Address of the implementation of the proxy.
     */
    function getProxyImplementation(address _proxy) external view returns (address) {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            return IStaticERC1967Proxy(_proxy).implementation();
        } else if (ptype == ProxyType.CHUGSPLASH) {
            return IStaticL1ChugSplashProxy(_proxy).getImplementation();
        } else if (ptype == ProxyType.RESOLVED) {
            return addressManager.getAddress(implementationName[_proxy]);
        } else {
            revert("ProxyAdmin: unknown proxy type");
        }
    }
    /**
     * @notice Returns the admin of the given proxy address.
     *
     * @param _proxy Address of the proxy to get the admin of.
     *
     * @return Address of the admin of the proxy.
     */
    function getProxyAdmin(address payable _proxy) external view returns (address) {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            return IStaticERC1967Proxy(_proxy).admin();
        } else if (ptype == ProxyType.CHUGSPLASH) {
            return IStaticL1ChugSplashProxy(_proxy).getOwner();
        } else if (ptype == ProxyType.RESOLVED) {
            return addressManager.owner();
        } else {
            revert("ProxyAdmin: unknown proxy type");
        }
    }
    /**
     * @notice Updates the admin of the given proxy address.
     *
     * @param _proxy    Address of the proxy to update.
     * @param _newAdmin Address of the new proxy admin.
     */
    function changeProxyAdmin(address payable _proxy, address _newAdmin) external onlyOwner {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            Proxy(_proxy).changeAdmin(_newAdmin);
        } else if (ptype == ProxyType.CHUGSPLASH) {
            L1ChugSplashProxy(_proxy).setOwner(_newAdmin);
        } else if (ptype == ProxyType.RESOLVED) {
            addressManager.transferOwnership(_newAdmin);
        } else {
            revert("ProxyAdmin: unknown proxy type");
        }
    }
    /**
     * @notice Changes a proxy's implementation contract.
     *
     * @param _proxy          Address of the proxy to upgrade.
     * @param _implementation Address of the new implementation address.
     */
    function upgrade(address payable _proxy, address _implementation) public onlyOwner {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            Proxy(_proxy).upgradeTo(_implementation);
        } else if (ptype == ProxyType.CHUGSPLASH) {
            L1ChugSplashProxy(_proxy).setStorage(
                // bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
                0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc,
                bytes32(uint256(uint160(_implementation)))
            );
        } else if (ptype == ProxyType.RESOLVED) {
            string memory name = implementationName[_proxy];
            addressManager.setAddress(name, _implementation);
        } else {
            // It should not be possible to retrieve a ProxyType value which is not matched by
            // one of the previous conditions.
            assert(false);
        }
    }
    /**
     * @notice Changes a proxy's implementation contract and delegatecalls the new implementation
     *         with some given data. Useful for atomic upgrade-and-initialize calls.
     *
     * @param _proxy          Address of the proxy to upgrade.
     * @param _implementation Address of the new implementation address.
     * @param _data           Data to trigger the new implementation with.
     */
    function upgradeAndCall(
        address payable _proxy,
        address _implementation,
        bytes memory _data
    ) external payable onlyOwner {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            Proxy(_proxy).upgradeToAndCall{ value: msg.value }(_implementation, _data);
        } else {
            // reverts if proxy type is unknown
            upgrade(_proxy, _implementation);
            (bool success, ) = _proxy.call{ value: msg.value }(_data);
            require(success, "ProxyAdmin: call to proxy after upgrade failed");
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title Proxy
 * @notice Proxy is a transparent proxy that passes through the call if the caller is the owner or
 *         if the caller is address(0), meaning that the call originated from an off-chain
 *         simulation.
 */
contract Proxy {
    /**
     * @notice The storage slot that holds the address of the implementation.
     *         bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice The storage slot that holds the address of the owner.
     *         bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice An event that is emitted each time the implementation is changed. This event is part
     *         of the EIP-1967 specification.
     *
     * @param implementation The address of the implementation contract
     */
    event Upgraded(address indexed implementation);
    /**
     * @notice An event that is emitted each time the owner is upgraded. This event is part of the
     *         EIP-1967 specification.
     *
     * @param previousAdmin The previous owner of the contract
     * @param newAdmin      The new owner of the contract
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @notice A modifier that reverts if not called by the owner or by address(0) to allow
     *         eth_call to interact with this proxy without needing to use low-level storage
     *         inspection. We assume that nobody is able to trigger calls from address(0) during
     *         normal EVM execution.
     */
    modifier proxyCallIfNotAdmin() {
        if (msg.sender == _getAdmin() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @notice Sets the initial admin during contract deployment. Admin address is stored at the
     *         EIP-1967 admin storage slot so that accidental storage collision with the
     *         implementation is not possible.
     *
     * @param _admin Address of the initial contract admin. Admin as the ability to access the
     *               transparent proxy interface.
     */
    constructor(address _admin) {
        _changeAdmin(_admin);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Set the implementation contract address. The code at the given address will execute
     *         when this contract is called.
     *
     * @param _implementation Address of the implementation contract.
     */
    function upgradeTo(address _implementation) public virtual proxyCallIfNotAdmin {
        _setImplementation(_implementation);
    }
    /**
     * @notice Set the implementation and call a function in a single transaction. Useful to ensure
     *         atomic execution of initialization-based upgrades.
     *
     * @param _implementation Address of the implementation contract.
     * @param _data           Calldata to delegatecall the new implementation with.
     */
    function upgradeToAndCall(address _implementation, bytes calldata _data)
        public
        payable
        virtual
        proxyCallIfNotAdmin
        returns (bytes memory)
    {
        _setImplementation(_implementation);
        (bool success, bytes memory returndata) = _implementation.delegatecall(_data);
        require(success, "Proxy: delegatecall to new implementation contract failed");
        return returndata;
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _admin New owner of the proxy contract.
     */
    function changeAdmin(address _admin) public virtual proxyCallIfNotAdmin {
        _changeAdmin(_admin);
    }
    /**
     * @notice Gets the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function admin() public virtual proxyCallIfNotAdmin returns (address) {
        return _getAdmin();
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function implementation() public virtual proxyCallIfNotAdmin returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
        emit Upgraded(_implementation);
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _admin New owner of the proxy contract.
     */
    function _changeAdmin(address _admin) internal {
        address previous = _getAdmin();
        assembly {
            sstore(OWNER_KEY, _admin)
        }
        emit AdminChanged(previous, _admin);
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal {
        address impl = _getImplementation();
        require(impl != address(0), "Proxy: implementation not initialized");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), impl, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address impl;
        assembly {
            impl := sload(IMPLEMENTATION_KEY)
        }
        return impl;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getAdmin() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
 * @custom:legacy
 * @title AddressManager
 * @notice AddressManager is a legacy contract that was used in the old version of the Optimism
 *         system to manage a registry of string names to addresses. We now use a more standard
 *         proxy system instead, but this contract is still necessary for backwards compatibility
 *         with several older contracts.
 */
contract AddressManager is Ownable {
    /**
     * @notice Mapping of the hashes of string names to addresses.
     */
    mapping(bytes32 => address) private addresses;
    /**
     * @notice Emitted when an address is modified in the registry.
     *
     * @param name       String name being set in the registry.
     * @param newAddress Address set for the given name.
     * @param oldAddress Address that was previously set for the given name.
     */
    event AddressSet(string indexed name, address newAddress, address oldAddress);
    /**
     * @notice Changes the address associated with a particular name.
     *
     * @param _name    String name to associate an address with.
     * @param _address Address to associate with the name.
     */
    function setAddress(string memory _name, address _address) external onlyOwner {
        bytes32 nameHash = _getNameHash(_name);
        address oldAddress = addresses[nameHash];
        addresses[nameHash] = _address;
        emit AddressSet(_name, _address, oldAddress);
    }
    /**
     * @notice Retrieves the address associated with a given name.
     *
     * @param _name Name to retrieve an address for.
     *
     * @return Address associated with the given name.
     */
    function getAddress(string memory _name) external view returns (address) {
        return addresses[_getNameHash(_name)];
    }
    /**
     * @notice Computes the hash of a name.
     *
     * @param _name Name to compute a hash for.
     *
     * @return Hash of the given name.
     */
    function _getNameHash(string memory _name) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(_name));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title IL1ChugSplashDeployer
 */
interface IL1ChugSplashDeployer {
    function isUpgrading() external view returns (bool);
}
/**
 * @custom:legacy
 * @title L1ChugSplashProxy
 * @notice Basic ChugSplash proxy contract for L1. Very close to being a normal proxy but has added
 *         functions `setCode` and `setStorage` for changing the code or storage of the contract.
 *
 *         Note for future developers: do NOT make anything in this contract 'public' unless you
 *         know what you're doing. Anything public can potentially have a function signature that
 *         conflicts with a signature attached to the implementation contract. Public functions
 *         SHOULD always have the `proxyCallIfNotOwner` modifier unless there's some *really* good
 *         reason not to have that modifier. And there almost certainly is not a good reason to not
 *         have that modifier. Beware!
 */
contract L1ChugSplashProxy {
    /**
     * @notice "Magic" prefix. When prepended to some arbitrary bytecode and used to create a
     *         contract, the appended bytecode will be deployed as given.
     */
    bytes13 internal constant DEPLOY_CODE_PREFIX = 0x600D380380600D6000396000f3;
    /**
     * @notice bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice Blocks a function from being called when the parent signals that the system should
     *         be paused via an isUpgrading function.
     */
    modifier onlyWhenNotPaused() {
        address owner = _getOwner();
        // We do a low-level call because there's no guarantee that the owner actually *is* an
        // L1ChugSplashDeployer contract and Solidity will throw errors if we do a normal call and
        // it turns out that it isn't the right type of contract.
        (bool success, bytes memory returndata) = owner.staticcall(
            abi.encodeWithSelector(IL1ChugSplashDeployer.isUpgrading.selector)
        );
        // If the call was unsuccessful then we assume that there's no "isUpgrading" method and we
        // can just continue as normal. We also expect that the return value is exactly 32 bytes
        // long. If this isn't the case then we can safely ignore the result.
        if (success && returndata.length == 32) {
            // Although the expected value is a *boolean*, it's safer to decode as a uint256 in the
            // case that the isUpgrading function returned something other than 0 or 1. But we only
            // really care about the case where this value is 0 (= false).
            uint256 ret = abi.decode(returndata, (uint256));
            require(ret == 0, "L1ChugSplashProxy: system is currently being upgraded");
        }
        _;
    }
    /**
     * @notice Makes a proxy call instead of triggering the given function when the caller is
     *         either the owner or the zero address. Caller can only ever be the zero address if
     *         this function is being called off-chain via eth_call, which is totally fine and can
     *         be convenient for client-side tooling. Avoids situations where the proxy and
     *         implementation share a sighash and the proxy function ends up being called instead
     *         of the implementation one.
     *
     *         Note: msg.sender == address(0) can ONLY be triggered off-chain via eth_call. If
     *         there's a way for someone to send a transaction with msg.sender == address(0) in any
     *         real context then we have much bigger problems. Primary reason to include this
     *         additional allowed sender is because the owner address can be changed dynamically
     *         and we do not want clients to have to keep track of the current owner in order to
     *         make an eth_call that doesn't trigger the proxied contract.
     */
    // slither-disable-next-line incorrect-modifier
    modifier proxyCallIfNotOwner() {
        if (msg.sender == _getOwner() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @param _owner Address of the initial contract owner.
     */
    constructor(address _owner) {
        _setOwner(_owner);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Sets the code that should be running behind this proxy.
     *
     *         Note: This scheme is a bit different from the standard proxy scheme where one would
     *         typically deploy the code separately and then set the implementation address. We're
     *         doing it this way because it gives us a lot more freedom on the client side. Can
     *         only be triggered by the contract owner.
     *
     * @param _code New contract code to run inside this contract.
     */
    function setCode(bytes memory _code) external proxyCallIfNotOwner {
        // Get the code hash of the current implementation.
        address implementation = _getImplementation();
        // If the code hash matches the new implementation then we return early.
        if (keccak256(_code) == _getAccountCodeHash(implementation)) {
            return;
        }
        // Create the deploycode by appending the magic prefix.
        bytes memory deploycode = abi.encodePacked(DEPLOY_CODE_PREFIX, _code);
        // Deploy the code and set the new implementation address.
        address newImplementation;
        assembly {
            newImplementation := create(0x0, add(deploycode, 0x20), mload(deploycode))
        }
        // Check that the code was actually deployed correctly. I'm not sure if you can ever
        // actually fail this check. Should only happen if the contract creation from above runs
        // out of gas but this parent execution thread does NOT run out of gas. Seems like we
        // should be doing this check anyway though.
        require(
            _getAccountCodeHash(newImplementation) == keccak256(_code),
            "L1ChugSplashProxy: code was not correctly deployed"
        );
        _setImplementation(newImplementation);
    }
    /**
     * @notice Modifies some storage slot within the proxy contract. Gives us a lot of power to
     *         perform upgrades in a more transparent way. Only callable by the owner.
     *
     * @param _key   Storage key to modify.
     * @param _value New value for the storage key.
     */
    function setStorage(bytes32 _key, bytes32 _value) external proxyCallIfNotOwner {
        assembly {
            sstore(_key, _value)
        }
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _owner New owner of the proxy contract.
     */
    function setOwner(address _owner) external proxyCallIfNotOwner {
        _setOwner(_owner);
    }
    /**
     * @notice Queries the owner of the proxy contract. Can only be called by the owner OR by
     *         making an eth_call and setting the "from" address to address(0).
     *
     * @return Owner address.
     */
    function getOwner() external proxyCallIfNotOwner returns (address) {
        return _getOwner();
    }
    /**
     * @notice Queries the implementation address. Can only be called by the owner OR by making an
     *         eth_call and setting the "from" address to address(0).
     *
     * @return Implementation address.
     */
    function getImplementation() external proxyCallIfNotOwner returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _owner New owner of the proxy contract.
     */
    function _setOwner(address _owner) internal {
        assembly {
            sstore(OWNER_KEY, _owner)
        }
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal onlyWhenNotPaused {
        address implementation = _getImplementation();
        require(implementation != address(0), "L1ChugSplashProxy: implementation is not set yet");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), implementation, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address implementation;
        assembly {
            implementation := sload(IMPLEMENTATION_KEY)
        }
        return implementation;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getOwner() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
    /**
     * @notice Gets the code hash for a given account.
     *
     * @param _account Address of the account to get a code hash for.
     *
     * @return Code hash for the account.
     */
    function _getAccountCodeHash(address _account) internal view returns (bytes32) {
        bytes32 codeHash;
        assembly {
            codeHash := extcodehash(_account)
        }
        return codeHash;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
 * @custom:legacy
 * @title AddressManager
 * @notice AddressManager is a legacy contract that was used in the old version of the Optimism
 *         system to manage a registry of string names to addresses. We now use a more standard
 *         proxy system instead, but this contract is still necessary for backwards compatibility
 *         with several older contracts.
 */
contract AddressManager is Ownable {
    /**
     * @notice Mapping of the hashes of string names to addresses.
     */
    mapping(bytes32 => address) private addresses;
    /**
     * @notice Emitted when an address is modified in the registry.
     *
     * @param name       String name being set in the registry.
     * @param newAddress Address set for the given name.
     * @param oldAddress Address that was previously set for the given name.
     */
    event AddressSet(string indexed name, address newAddress, address oldAddress);
    /**
     * @notice Changes the address associated with a particular name.
     *
     * @param _name    String name to associate an address with.
     * @param _address Address to associate with the name.
     */
    function setAddress(string memory _name, address _address) external onlyOwner {
        bytes32 nameHash = _getNameHash(_name);
        address oldAddress = addresses[nameHash];
        addresses[nameHash] = _address;
        emit AddressSet(_name, _address, oldAddress);
    }
    /**
     * @notice Retrieves the address associated with a given name.
     *
     * @param _name Name to retrieve an address for.
     *
     * @return Address associated with the given name.
     */
    function getAddress(string memory _name) external view returns (address) {
        return addresses[_getNameHash(_name)];
    }
    /**
     * @notice Computes the hash of a name.
     *
     * @param _name Name to compute a hash for.
     *
     * @return Hash of the given name.
     */
    function _getNameHash(string memory _name) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(_name));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title Proxy
 * @notice Proxy is a transparent proxy that passes through the call if the caller is the owner or
 *         if the caller is address(0), meaning that the call originated from an off-chain
 *         simulation.
 */
contract Proxy {
    /**
     * @notice The storage slot that holds the address of the implementation.
     *         bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice The storage slot that holds the address of the owner.
     *         bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice An event that is emitted each time the implementation is changed. This event is part
     *         of the EIP-1967 specification.
     *
     * @param implementation The address of the implementation contract
     */
    event Upgraded(address indexed implementation);
    /**
     * @notice An event that is emitted each time the owner is upgraded. This event is part of the
     *         EIP-1967 specification.
     *
     * @param previousAdmin The previous owner of the contract
     * @param newAdmin      The new owner of the contract
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @notice A modifier that reverts if not called by the owner or by address(0) to allow
     *         eth_call to interact with this proxy without needing to use low-level storage
     *         inspection. We assume that nobody is able to trigger calls from address(0) during
     *         normal EVM execution.
     */
    modifier proxyCallIfNotAdmin() {
        if (msg.sender == _getAdmin() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @notice Sets the initial admin during contract deployment. Admin address is stored at the
     *         EIP-1967 admin storage slot so that accidental storage collision with the
     *         implementation is not possible.
     *
     * @param _admin Address of the initial contract admin. Admin as the ability to access the
     *               transparent proxy interface.
     */
    constructor(address _admin) {
        _changeAdmin(_admin);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Set the implementation contract address. The code at the given address will execute
     *         when this contract is called.
     *
     * @param _implementation Address of the implementation contract.
     */
    function upgradeTo(address _implementation) public virtual proxyCallIfNotAdmin {
        _setImplementation(_implementation);
    }
    /**
     * @notice Set the implementation and call a function in a single transaction. Useful to ensure
     *         atomic execution of initialization-based upgrades.
     *
     * @param _implementation Address of the implementation contract.
     * @param _data           Calldata to delegatecall the new implementation with.
     */
    function upgradeToAndCall(address _implementation, bytes calldata _data)
        public
        payable
        virtual
        proxyCallIfNotAdmin
        returns (bytes memory)
    {
        _setImplementation(_implementation);
        (bool success, bytes memory returndata) = _implementation.delegatecall(_data);
        require(success, "Proxy: delegatecall to new implementation contract failed");
        return returndata;
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _admin New owner of the proxy contract.
     */
    function changeAdmin(address _admin) public virtual proxyCallIfNotAdmin {
        _changeAdmin(_admin);
    }
    /**
     * @notice Gets the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function admin() public virtual proxyCallIfNotAdmin returns (address) {
        return _getAdmin();
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function implementation() public virtual proxyCallIfNotAdmin returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
        emit Upgraded(_implementation);
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _admin New owner of the proxy contract.
     */
    function _changeAdmin(address _admin) internal {
        address previous = _getAdmin();
        assembly {
            sstore(OWNER_KEY, _admin)
        }
        emit AdminChanged(previous, _admin);
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal {
        address impl = _getImplementation();
        require(impl != address(0), "Proxy: implementation not initialized");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), impl, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address impl;
        assembly {
            impl := sload(IMPLEMENTATION_KEY)
        }
        return impl;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getAdmin() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
}