Contract Source Code:
<i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: Unlicense
/*
* @title Solidity Bytes Arrays Utils
* @author Gonçalo Sá <goncalo.sa@consensys.net>
*
* @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
* The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
*/
pragma solidity >=0.8.0 <0.9.0;
library BytesLib {
function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
bytes memory tempBytes;
assembly {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// Store the length of the first bytes array at the beginning of
// the memory for tempBytes.
let length := mload(_preBytes)
mstore(tempBytes, length)
// Maintain a memory counter for the current write location in the
// temp bytes array by adding the 32 bytes for the array length to
// the starting location.
let mc := add(tempBytes, 0x20)
// Stop copying when the memory counter reaches the length of the
// first bytes array.
let end := add(mc, length)
for {
// Initialize a copy counter to the start of the _preBytes data,
// 32 bytes into its memory.
let cc := add(_preBytes, 0x20)
} lt(mc, end) {
// Increase both counters by 32 bytes each iteration.
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// Write the _preBytes data into the tempBytes memory 32 bytes
// at a time.
mstore(mc, mload(cc))
}
// Add the length of _postBytes to the current length of tempBytes
// and store it as the new length in the first 32 bytes of the
// tempBytes memory.
length := mload(_postBytes)
mstore(tempBytes, add(length, mload(tempBytes)))
// Move the memory counter back from a multiple of 0x20 to the
// actual end of the _preBytes data.
mc := end
// Stop copying when the memory counter reaches the new combined
// length of the arrays.
end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
// Update the free-memory pointer by padding our last write location
// to 32 bytes: add 31 bytes to the end of tempBytes to move to the
// next 32 byte block, then round down to the nearest multiple of
// 32. If the sum of the length of the two arrays is zero then add
// one before rounding down to leave a blank 32 bytes (the length block with 0).
mstore(
0x40,
and(
add(add(end, iszero(add(length, mload(_preBytes)))), 31),
not(31) // Round down to the nearest 32 bytes.
)
)
}
return tempBytes;
}
function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
assembly {
// Read the first 32 bytes of _preBytes storage, which is the length
// of the array. (We don't need to use the offset into the slot
// because arrays use the entire slot.)
let fslot := sload(_preBytes.slot)
// Arrays of 31 bytes or less have an even value in their slot,
// while longer arrays have an odd value. The actual length is
// the slot divided by two for odd values, and the lowest order
// byte divided by two for even values.
// If the slot is even, bitwise and the slot with 255 and divide by
// two to get the length. If the slot is odd, bitwise and the slot
// with -1 and divide by two.
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
let newlength := add(slength, mlength)
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
switch add(lt(slength, 32), lt(newlength, 32))
case 2 {
// Since the new array still fits in the slot, we just need to
// update the contents of the slot.
// uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
sstore(
_preBytes.slot,
// all the modifications to the slot are inside this
// next block
add(
// we can just add to the slot contents because the
// bytes we want to change are the LSBs
fslot,
add(
mul(
div(
// load the bytes from memory
mload(add(_postBytes, 0x20)),
// zero all bytes to the right
exp(0x100, sub(32, mlength))
),
// and now shift left the number of bytes to
// leave space for the length in the slot
exp(0x100, sub(32, newlength))
),
// increase length by the double of the memory
// bytes length
mul(mlength, 2)
)
)
)
}
case 1 {
// The stored value fits in the slot, but the combined value
// will exceed it.
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// The contents of the _postBytes array start 32 bytes into
// the structure. Our first read should obtain the `submod`
// bytes that can fit into the unused space in the last word
// of the stored array. To get this, we read 32 bytes starting
// from `submod`, so the data we read overlaps with the array
// contents by `submod` bytes. Masking the lowest-order
// `submod` bytes allows us to add that value directly to the
// stored value.
let submod := sub(32, slength)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(sc, add(and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00), and(mload(mc), mask)))
for {
mc := add(mc, 0x20)
sc := add(sc, 1)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
default {
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
// Start copying to the last used word of the stored array.
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// Copy over the first `submod` bytes of the new data as in
// case 1 above.
let slengthmod := mod(slength, 32)
let mlengthmod := mod(mlength, 32)
let submod := sub(32, slengthmod)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(sc, add(sload(sc), and(mload(mc), mask)))
for {
sc := add(sc, 1)
mc := add(mc, 0x20)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
}
}
function slice(
bytes memory _bytes,
uint _start,
uint _length
) internal pure returns (bytes memory) {
require(_length + 31 >= _length, "slice_overflow");
require(_bytes.length >= _start + _length, "slice_outOfBounds");
bytes memory tempBytes;
assembly {
switch iszero(_length)
case 0 {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// The first word of the slice result is potentially a partial
// word read from the original array. To read it, we calculate
// the length of that partial word and start copying that many
// bytes into the array. The first word we copy will start with
// data we don't care about, but the last `lengthmod` bytes will
// land at the beginning of the contents of the new array. When
// we're done copying, we overwrite the full first word with
// the actual length of the slice.
let lengthmod := and(_length, 31)
// The multiplication in the next line is necessary
// because when slicing multiples of 32 bytes (lengthmod == 0)
// the following copy loop was copying the origin's length
// and then ending prematurely not copying everything it should.
let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
let end := add(mc, _length)
for {
// The multiplication in the next line has the same exact purpose
// as the one above.
let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
mstore(tempBytes, _length)
//update free-memory pointer
//allocating the array padded to 32 bytes like the compiler does now
mstore(0x40, and(add(mc, 31), not(31)))
}
//if we want a zero-length slice let's just return a zero-length array
default {
tempBytes := mload(0x40)
//zero out the 32 bytes slice we are about to return
//we need to do it because Solidity does not garbage collect
mstore(tempBytes, 0)
mstore(0x40, add(tempBytes, 0x20))
}
}
return tempBytes;
}
function toAddress(bytes memory _bytes, uint _start) internal pure returns (address) {
require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
address tempAddress;
assembly {
tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
}
return tempAddress;
}
function toUint8(bytes memory _bytes, uint _start) internal pure returns (uint8) {
require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
uint8 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x1), _start))
}
return tempUint;
}
function toUint16(bytes memory _bytes, uint _start) internal pure returns (uint16) {
require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
uint16 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x2), _start))
}
return tempUint;
}
function toUint32(bytes memory _bytes, uint _start) internal pure returns (uint32) {
require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
uint32 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x4), _start))
}
return tempUint;
}
function toUint64(bytes memory _bytes, uint _start) internal pure returns (uint64) {
require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
uint64 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x8), _start))
}
return tempUint;
}
function toUint96(bytes memory _bytes, uint _start) internal pure returns (uint96) {
require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
uint96 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0xc), _start))
}
return tempUint;
}
function toUint128(bytes memory _bytes, uint _start) internal pure returns (uint128) {
require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
uint128 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x10), _start))
}
return tempUint;
}
function toUint256(bytes memory _bytes, uint _start) internal pure returns (uint) {
require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
uint tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x20), _start))
}
return tempUint;
}
function toBytes32(bytes memory _bytes, uint _start) internal pure returns (bytes32) {
require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
bytes32 tempBytes32;
assembly {
tempBytes32 := mload(add(add(_bytes, 0x20), _start))
}
return tempBytes32;
}
function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
bool success = true;
assembly {
let length := mload(_preBytes)
// if lengths don't match the arrays are not equal
switch eq(length, mload(_postBytes))
case 1 {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
let mc := add(_preBytes, 0x20)
let end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
} eq(add(lt(mc, end), cb), 2) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// if any of these checks fails then arrays are not equal
if iszero(eq(mload(mc), mload(cc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
bool success = true;
assembly {
// we know _preBytes_offset is 0
let fslot := sload(_preBytes.slot)
// Decode the length of the stored array like in concatStorage().
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
// if lengths don't match the arrays are not equal
switch eq(slength, mlength)
case 1 {
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
if iszero(iszero(slength)) {
switch lt(slength, 32)
case 1 {
// blank the last byte which is the length
fslot := mul(div(fslot, 0x100), 0x100)
if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
// unsuccess:
success := 0
}
}
default {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := keccak256(0x0, 0x20)
let mc := add(_postBytes, 0x20)
let end := add(mc, mlength)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
for {
} eq(add(lt(mc, end), cb), 2) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
if iszero(eq(sload(sc), mload(mc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
// @notice send a LayerZero message to the specified address at a LayerZero endpoint.
// @param _dstChainId - the destination chain identifier
// @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
// @param _payload - a custom bytes payload to send to the destination contract
// @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
// @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
// @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
function send(
uint16 _dstChainId,
bytes calldata _destination,
bytes calldata _payload,
address payable _refundAddress,
address _zroPaymentAddress,
bytes calldata _adapterParams
) external payable;
// @notice used by the messaging library to publish verified payload
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source contract (as bytes) at the source chain
// @param _dstAddress - the address on destination chain
// @param _nonce - the unbound message ordering nonce
// @param _gasLimit - the gas limit for external contract execution
// @param _payload - verified payload to send to the destination contract
function receivePayload(
uint16 _srcChainId,
bytes calldata _srcAddress,
address _dstAddress,
uint64 _nonce,
uint _gasLimit,
bytes calldata _payload
) external;
// @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
// @notice get the outboundNonce from this source chain which, consequently, is always an EVM
// @param _srcAddress - the source chain contract address
function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
// @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
// @param _dstChainId - the destination chain identifier
// @param _userApplication - the user app address on this EVM chain
// @param _payload - the custom message to send over LayerZero
// @param _payInZRO - if false, user app pays the protocol fee in native token
// @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
function estimateFees(
uint16 _dstChainId,
address _userApplication,
bytes calldata _payload,
bool _payInZRO,
bytes calldata _adapterParam
) external view returns (uint nativeFee, uint zroFee);
// @notice get this Endpoint's immutable source identifier
function getChainId() external view returns (uint16);
// @notice the interface to retry failed message on this Endpoint destination
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
// @param _payload - the payload to be retried
function retryPayload(
uint16 _srcChainId,
bytes calldata _srcAddress,
bytes calldata _payload
) external;
// @notice query if any STORED payload (message blocking) at the endpoint.
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
// @notice query if the _libraryAddress is valid for sending msgs.
// @param _userApplication - the user app address on this EVM chain
function getSendLibraryAddress(address _userApplication) external view returns (address);
// @notice query if the _libraryAddress is valid for receiving msgs.
// @param _userApplication - the user app address on this EVM chain
function getReceiveLibraryAddress(address _userApplication) external view returns (address);
// @notice query if the non-reentrancy guard for send() is on
// @return true if the guard is on. false otherwise
function isSendingPayload() external view returns (bool);
// @notice query if the non-reentrancy guard for receive() is on
// @return true if the guard is on. false otherwise
function isReceivingPayload() external view returns (bool);
// @notice get the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _userApplication - the contract address of the user application
// @param _configType - type of configuration. every messaging library has its own convention.
function getConfig(
uint16 _version,
uint16 _chainId,
address _userApplication,
uint _configType
) external view returns (bytes memory);
// @notice get the send() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getSendVersion(address _userApplication) external view returns (uint16);
// @notice get the lzReceive() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getReceiveVersion(address _userApplication) external view returns (uint16);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
// @notice LayerZero endpoint will invoke this function to deliver the message on the destination
// @param _srcChainId - the source endpoint identifier
// @param _srcAddress - the source sending contract address from the source chain
// @param _nonce - the ordered message nonce
// @param _payload - the signed payload is the UA bytes has encoded to be sent
function lzReceive(
uint16 _srcChainId,
bytes calldata _srcAddress,
uint64 _nonce,
bytes calldata _payload
) external;
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
// @notice set the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _configType - type of configuration. every messaging library has its own convention.
// @param _config - configuration in the bytes. can encode arbitrary content.
function setConfig(
uint16 _version,
uint16 _chainId,
uint _configType,
bytes calldata _config
) external;
// @notice set the send() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setSendVersion(uint16 _version) external;
// @notice set the lzReceive() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setReceiveVersion(uint16 _version) external;
// @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
// @param _srcChainId - the chainId of the source chain
// @param _srcAddress - the contract address of the source contract at the source chain
function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
/// @custom:storage-location erc7201:openzeppelin.storage.Ownable
struct OwnableStorage {
address _owner;
}
// keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;
function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
assembly {
$.slot := OwnableStorageLocation
}
}
/**
* @dev The caller account is not authorized to perform an operation.
*/
error OwnableUnauthorizedAccount(address account);
/**
* @dev The owner is not a valid owner account. (eg. `address(0)`)
*/
error OwnableInvalidOwner(address owner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the address provided by the deployer as the initial owner.
*/
function __Ownable_init(address initialOwner) internal onlyInitializing {
__Ownable_init_unchained(initialOwner);
}
function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
if (initialOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(initialOwner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
OwnableStorage storage $ = _getOwnableStorage();
return $._owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
revert OwnableUnauthorizedAccount(_msgSender());
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
OwnableStorage storage $ = _getOwnableStorage();
address oldOwner = $._owner;
$._owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.20;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```solidity
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
*
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Storage of the initializable contract.
*
* It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
* when using with upgradeable contracts.
*
* @custom:storage-location erc7201:openzeppelin.storage.Initializable
*/
struct InitializableStorage {
/**
* @dev Indicates that the contract has been initialized.
*/
uint64 _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool _initializing;
}
// keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;
/**
* @dev The contract is already initialized.
*/
error InvalidInitialization();
/**
* @dev The contract is not initializing.
*/
error NotInitializing();
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint64 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
* number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
* production.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
// solhint-disable-next-line var-name-mixedcase
InitializableStorage storage $ = _getInitializableStorage();
// Cache values to avoid duplicated sloads
bool isTopLevelCall = !$._initializing;
uint64 initialized = $._initialized;
// Allowed calls:
// - initialSetup: the contract is not in the initializing state and no previous version was
// initialized
// - construction: the contract is initialized at version 1 (no reininitialization) and the
// current contract is just being deployed
bool initialSetup = initialized == 0 && isTopLevelCall;
bool construction = initialized == 1 && address(this).code.length == 0;
if (!initialSetup && !construction) {
revert InvalidInitialization();
}
$._initialized = 1;
if (isTopLevelCall) {
$._initializing = true;
}
_;
if (isTopLevelCall) {
$._initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint64 version) {
// solhint-disable-next-line var-name-mixedcase
InitializableStorage storage $ = _getInitializableStorage();
if ($._initializing || $._initialized >= version) {
revert InvalidInitialization();
}
$._initialized = version;
$._initializing = true;
_;
$._initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
_checkInitializing();
_;
}
/**
* @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
*/
function _checkInitializing() internal view virtual {
if (!_isInitializing()) {
revert NotInitializing();
}
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
// solhint-disable-next-line var-name-mixedcase
InitializableStorage storage $ = _getInitializableStorage();
if ($._initializing) {
revert InvalidInitialization();
}
if ($._initialized != type(uint64).max) {
$._initialized = type(uint64).max;
emit Initialized(type(uint64).max);
}
}
/**
* @dev Returns the highest version that has been initialized. See {reinitializer}.
*/
function _getInitializedVersion() internal view returns (uint64) {
return _getInitializableStorage()._initialized;
}
/**
* @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
*/
function _isInitializing() internal view returns (bool) {
return _getInitializableStorage()._initializing;
}
/**
* @dev Returns a pointer to the storage namespace.
*/
// solhint-disable-next-line var-name-mixedcase
function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
assembly {
$.slot := INITIALIZABLE_STORAGE
}
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*/
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
/// @custom:storage-location erc7201:openzeppelin.storage.ERC20
struct ERC20Storage {
mapping(address account => uint256) _balances;
mapping(address account => mapping(address spender => uint256)) _allowances;
uint256 _totalSupply;
string _name;
string _symbol;
}
// keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;
function _getERC20Storage() private pure returns (ERC20Storage storage $) {
assembly {
$.slot := ERC20StorageLocation
}
}
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
ERC20Storage storage $ = _getERC20Storage();
$._name = name_;
$._symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
ERC20Storage storage $ = _getERC20Storage();
return $._name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
ERC20Storage storage $ = _getERC20Storage();
return $._symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual returns (uint256) {
ERC20Storage storage $ = _getERC20Storage();
return $._totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual returns (uint256) {
ERC20Storage storage $ = _getERC20Storage();
return $._balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `value`.
*/
function transfer(address to, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_transfer(owner, to, value);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual returns (uint256) {
ERC20Storage storage $ = _getERC20Storage();
return $._allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, value);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `value`.
* - the caller must have allowance for ``from``'s tokens of at least
* `value`.
*/
function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, value);
_transfer(from, to, value);
return true;
}
/**
* @dev Moves a `value` amount of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _transfer(address from, address to, uint256 value) internal {
if (from == address(0)) {
revert ERC20InvalidSender(address(0));
}
if (to == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(from, to, value);
}
/**
* @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
* (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
* this function.
*
* Emits a {Transfer} event.
*/
function _update(address from, address to, uint256 value) internal virtual {
ERC20Storage storage $ = _getERC20Storage();
if (from == address(0)) {
// Overflow check required: The rest of the code assumes that totalSupply never overflows
$._totalSupply += value;
} else {
uint256 fromBalance = $._balances[from];
if (fromBalance < value) {
revert ERC20InsufficientBalance(from, fromBalance, value);
}
unchecked {
// Overflow not possible: value <= fromBalance <= totalSupply.
$._balances[from] = fromBalance - value;
}
}
if (to == address(0)) {
unchecked {
// Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
$._totalSupply -= value;
}
} else {
unchecked {
// Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
$._balances[to] += value;
}
}
emit Transfer(from, to, value);
}
/**
* @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
* Relies on the `_update` mechanism
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _mint(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(address(0), account, value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
* Relies on the `_update` mechanism.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead
*/
function _burn(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidSender(address(0));
}
_update(account, address(0), value);
}
/**
* @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*
* Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
*/
function _approve(address owner, address spender, uint256 value) internal {
_approve(owner, spender, value, true);
}
/**
* @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
*
* By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
* `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
* `Approval` event during `transferFrom` operations.
*
* Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
* true using the following override:
* ```
* function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
* super._approve(owner, spender, value, true);
* }
* ```
*
* Requirements are the same as {_approve}.
*/
function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
ERC20Storage storage $ = _getERC20Storage();
if (owner == address(0)) {
revert ERC20InvalidApprover(address(0));
}
if (spender == address(0)) {
revert ERC20InvalidSpender(address(0));
}
$._allowances[owner][spender] = value;
if (emitEvent) {
emit Approval(owner, spender, value);
}
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `value`.
*
* Does not update the allowance value in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Does not emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
if (currentAllowance < value) {
revert ERC20InsufficientAllowance(spender, currentAllowance, value);
}
unchecked {
_approve(owner, spender, currentAllowance - value, false);
}
}
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)
pragma solidity ^0.8.20;
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ContextUpgradeable} from "../../../utils/ContextUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
function __ERC20Burnable_init() internal onlyInitializing {
}
function __ERC20Burnable_init_unchained() internal onlyInitializing {
}
/**
* @dev Destroys a `value` amount of tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 value) public virtual {
_burn(_msgSender(), value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, deducting from
* the caller's allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `value`.
*/
function burnFrom(address account, uint256 value) public virtual {
_spendAllowance(account, _msgSender(), value);
_burn(account, value);
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*/
abstract contract ERC165Upgradeable is Initializable, IERC165 {
function __ERC165_init() internal onlyInitializing {
}
function __ERC165_init_unchained() internal onlyInitializing {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)
pragma solidity ^0.8.20;
import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/// @custom:storage-location erc7201:openzeppelin.storage.Pausable
struct PausableStorage {
bool _paused;
}
// keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Pausable")) - 1)) & ~bytes32(uint256(0xff))
bytes32 private constant PausableStorageLocation = 0xcd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300;
function _getPausableStorage() private pure returns (PausableStorage storage $) {
assembly {
$.slot := PausableStorageLocation
}
}
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
/**
* @dev The operation failed because the contract is paused.
*/
error EnforcedPause();
/**
* @dev The operation failed because the contract is not paused.
*/
error ExpectedPause();
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal onlyInitializing {
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal onlyInitializing {
PausableStorage storage $ = _getPausableStorage();
$._paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
PausableStorage storage $ = _getPausableStorage();
return $._paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
if (paused()) {
revert EnforcedPause();
}
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
if (!paused()) {
revert ExpectedPause();
}
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
PausableStorage storage $ = _getPausableStorage();
$._paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
PausableStorage storage $ = _getPausableStorage();
$._paused = false;
emit Unpaused(_msgSender());
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;
/**
* @dev Standard ERC20 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
*/
interface IERC20Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC20InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC20InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
* @param spender Address that may be allowed to operate on tokens without being their owner.
* @param allowance Amount of tokens a `spender` is allowed to operate with.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC20InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `spender` to be approved. Used in approvals.
* @param spender Address that may be allowed to operate on tokens without being their owner.
*/
error ERC20InvalidSpender(address spender);
}
/**
* @dev Standard ERC721 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
*/
interface IERC721Errors {
/**
* @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
* Used in balance queries.
* @param owner Address of the current owner of a token.
*/
error ERC721InvalidOwner(address owner);
/**
* @dev Indicates a `tokenId` whose `owner` is the zero address.
* @param tokenId Identifier number of a token.
*/
error ERC721NonexistentToken(uint256 tokenId);
/**
* @dev Indicates an error related to the ownership over a particular token. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param tokenId Identifier number of a token.
* @param owner Address of the current owner of a token.
*/
error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC721InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC721InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param tokenId Identifier number of a token.
*/
error ERC721InsufficientApproval(address operator, uint256 tokenId);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC721InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC721InvalidOperator(address operator);
}
/**
* @dev Standard ERC1155 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
*/
interface IERC1155Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
* @param tokenId Identifier number of a token.
*/
error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC1155InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC1155InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param owner Address of the current owner of a token.
*/
error ERC1155MissingApprovalForAll(address operator, address owner);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC1155InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC1155InvalidOperator(address operator);
/**
* @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
* Used in batch transfers.
* @param idsLength Length of the array of token identifiers
* @param valuesLength Length of the array of token amounts
*/
error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./OFTCoreV2Initializable.sol";
import "./OFT/interfaces/IOFTV2.sol";
import "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
abstract contract BaseOFTV2Initializable is
OFTCoreV2Initializable,
ERC165Upgradeable,
IOFTV2
{
/************************************************************************
* public functions
************************************************************************/
function sendFrom(
address _from,
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
LzCallParams calldata _callParams
) public payable virtual override {
_send(
_from,
_dstChainId,
_toAddress,
_amount,
_callParams.refundAddress,
_callParams.zroPaymentAddress,
_callParams.adapterParams
);
}
function sendAndCall(
address _from,
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bytes calldata _payload,
uint64 _dstGasForCall,
LzCallParams calldata _callParams
) public payable virtual override {
_sendAndCall(
_from,
_dstChainId,
_toAddress,
_amount,
_payload,
_dstGasForCall,
_callParams.refundAddress,
_callParams.zroPaymentAddress,
_callParams.adapterParams
);
}
/************************************************************************
* public view functions
************************************************************************/
function supportsInterface(
bytes4 interfaceId
)
public
view
virtual
override(ERC165Upgradeable, IERC165)
returns (bool)
{
return
interfaceId == type(IOFTV2).interfaceId ||
super.supportsInterface(interfaceId);
}
function estimateSendFee(
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bool _useZro,
bytes calldata _adapterParams
) public view virtual override returns (uint nativeFee, uint zroFee) {
return
_estimateSendFee(
_dstChainId,
_toAddress,
_amount,
_useZro,
_adapterParams
);
}
function estimateSendAndCallFee(
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bytes calldata _payload,
uint64 _dstGasForCall,
bool _useZro,
bytes calldata _adapterParams
) public view virtual override returns (uint nativeFee, uint zroFee) {
return
_estimateSendAndCallFee(
_dstChainId,
_toAddress,
_amount,
_payload,
_dstGasForCall,
_useZro,
_adapterParams
);
}
function circulatingSupply() public view virtual override returns (uint);
function token() public view virtual override returns (address);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "./OFTV2Initializable.sol";
contract Empyreal is
Initializable,
ERC20BurnableUpgradeable,
PausableUpgradeable,
OwnableUpgradeable,
OFTV2Initializable
{
/// @custom:oz-upgrades-unsafe-allow constructor
constructor() {
_disableInitializers();
}
function initialize(address _owner) public virtual initializer {
__ERC20_init("Empyreal", "EMP");
__ERC20Burnable_init();
__Pausable_init();
__Ownable_init(_owner);
// chain 101
lzEndpoint = ILayerZeroEndpoint(
address(0x66A71Dcef29A0fFBDBE3c6a460a3B5BC225Cd675)
);
// start with contract paused
_pause();
}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
function _update(
address from,
address to,
uint256 amount
) internal virtual override {
if (tx.origin != owner()) {
require(!paused(), "Empyreal: token transfer while paused");
}
super._update(from, to, amount);
}
/*
* LZ Methods
*/
function circulatingSupply() public view virtual override returns (uint) {
return totalSupply();
}
/************************************************************************
* internal functions
************************************************************************/
function _debitFrom(
address _from,
uint16,
bytes32,
uint _amount
) internal virtual override returns (uint) {
address spender = _msgSender();
if (_from != spender) _spendAllowance(_from, spender, _amount);
_burn(_from, _amount);
return _amount;
}
function _creditTo(
uint16,
address _toAddress,
uint _amount
) internal virtual override returns (uint) {
_mint(_toAddress, _amount);
return _amount;
}
function _transferFrom(
address _from,
address _to,
uint _amount
) internal virtual override returns (uint) {
address spender = _msgSender();
// if transfer from this contract, no need to check allowance
if (_from != address(this) && _from != spender)
_spendAllowance(_from, spender, _amount);
_transfer(_from, _to, _amount);
return _amount;
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import {IERC165} from "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
/**
* @dev Interface of the IOFT core standard
*/
interface ICommonOFT is IERC165 {
struct LzCallParams {
address payable refundAddress;
address zroPaymentAddress;
bytes adapterParams;
}
/**
* @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
* _dstChainId - L0 defined chain id to send tokens too
* _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
* _amount - amount of the tokens to transfer
* _useZro - indicates to use zro to pay L0 fees
* _adapterParam - flexible bytes array to indicate messaging adapter services in L0
*/
function estimateSendFee(
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bool _useZro,
bytes calldata _adapterParams
) external view returns (uint nativeFee, uint zroFee);
function estimateSendAndCallFee(
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bytes calldata _payload,
uint64 _dstGasForCall,
bool _useZro,
bytes calldata _adapterParams
) external view returns (uint nativeFee, uint zroFee);
/**
* @dev returns the circulating amount of tokens on current chain
*/
function circulatingSupply() external view returns (uint);
/**
* @dev returns the address of the ERC20 token
*/
function token() external view returns (address);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface IOFTReceiverV2 {
/**
* @dev Called by the OFT contract when tokens are received from source chain.
* @param _srcChainId The chain id of the source chain.
* @param _srcAddress The address of the OFT token contract on the source chain.
* @param _nonce The nonce of the transaction on the source chain.
* @param _from The address of the account who calls the sendAndCall() on the source chain.
* @param _amount The amount of tokens to transfer.
* @param _payload Additional data with no specified format.
*/
function onOFTReceived(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes32 _from, uint _amount, bytes calldata _payload) external;
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import "./ICommonOFT.sol";
/**
* @dev Interface of the IOFT core standard
*/
interface IOFTV2 is ICommonOFT {
/**
* @dev send `_amount` amount of token to (`_dstChainId`, `_toAddress`) from `_from`
* `_from` the owner of token
* `_dstChainId` the destination chain identifier
* `_toAddress` can be any size depending on the `dstChainId`.
* `_amount` the quantity of tokens in wei
* `_refundAddress` the address LayerZero refunds if too much message fee is sent
* `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
* `_adapterParams` is a flexible bytes array to indicate messaging adapter services
*/
function sendFrom(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, LzCallParams calldata _callParams) external payable;
function sendAndCall(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes calldata _payload, uint64 _dstGasForCall, LzCallParams calldata _callParams) external payable;
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity >=0.7.6;
library ExcessivelySafeCall {
uint constant LOW_28_MASK = 0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
/// @notice Use when you _really_ really _really_ don't trust the called
/// contract. This prevents the called contract from causing reversion of
/// the caller in as many ways as we can.
/// @dev The main difference between this and a solidity low-level call is
/// that we limit the number of bytes that the callee can cause to be
/// copied to caller memory. This prevents stupid things like malicious
/// contracts returning 10,000,000 bytes causing a local OOG when copying
/// to memory.
/// @param _target The address to call
/// @param _gas The amount of gas to forward to the remote contract
/// @param _maxCopy The maximum number of bytes of returndata to copy
/// to memory.
/// @param _calldata The data to send to the remote contract
/// @return success and returndata, as `.call()`. Returndata is capped to
/// `_maxCopy` bytes.
function excessivelySafeCall(
address _target,
uint _gas,
uint16 _maxCopy,
bytes memory _calldata
) internal returns (bool, bytes memory) {
// set up for assembly call
uint _toCopy;
bool _success;
bytes memory _returnData = new bytes(_maxCopy);
// dispatch message to recipient
// by assembly calling "handle" function
// we call via assembly to avoid memcopying a very large returndata
// returned by a malicious contract
assembly {
_success := call(
_gas, // gas
_target, // recipient
0, // ether value
add(_calldata, 0x20), // inloc
mload(_calldata), // inlen
0, // outloc
0 // outlen
)
// limit our copy to 256 bytes
_toCopy := returndatasize()
if gt(_toCopy, _maxCopy) {
_toCopy := _maxCopy
}
// Store the length of the copied bytes
mstore(_returnData, _toCopy)
// copy the bytes from returndata[0:_toCopy]
returndatacopy(add(_returnData, 0x20), 0, _toCopy)
}
return (_success, _returnData);
}
/// @notice Use when you _really_ really _really_ don't trust the called
/// contract. This prevents the called contract from causing reversion of
/// the caller in as many ways as we can.
/// @dev The main difference between this and a solidity low-level call is
/// that we limit the number of bytes that the callee can cause to be
/// copied to caller memory. This prevents stupid things like malicious
/// contracts returning 10,000,000 bytes causing a local OOG when copying
/// to memory.
/// @param _target The address to call
/// @param _gas The amount of gas to forward to the remote contract
/// @param _maxCopy The maximum number of bytes of returndata to copy
/// to memory.
/// @param _calldata The data to send to the remote contract
/// @return success and returndata, as `.call()`. Returndata is capped to
/// `_maxCopy` bytes.
function excessivelySafeStaticCall(
address _target,
uint _gas,
uint16 _maxCopy,
bytes memory _calldata
) internal view returns (bool, bytes memory) {
// set up for assembly call
uint _toCopy;
bool _success;
bytes memory _returnData = new bytes(_maxCopy);
// dispatch message to recipient
// by assembly calling "handle" function
// we call via assembly to avoid memcopying a very large returndata
// returned by a malicious contract
assembly {
_success := staticcall(
_gas, // gas
_target, // recipient
add(_calldata, 0x20), // inloc
mload(_calldata), // inlen
0, // outloc
0 // outlen
)
// limit our copy to 256 bytes
_toCopy := returndatasize()
if gt(_toCopy, _maxCopy) {
_toCopy := _maxCopy
}
// Store the length of the copied bytes
mstore(_returnData, _toCopy)
// copy the bytes from returndata[0:_toCopy]
returndatacopy(add(_returnData, 0x20), 0, _toCopy)
}
return (_success, _returnData);
}
/**
* @notice Swaps function selectors in encoded contract calls
* @dev Allows reuse of encoded calldata for functions with identical
* argument types but different names. It simply swaps out the first 4 bytes
* for the new selector. This function modifies memory in place, and should
* only be used with caution.
* @param _newSelector The new 4-byte selector
* @param _buf The encoded contract args
*/
function swapSelector(bytes4 _newSelector, bytes memory _buf) internal pure {
require(_buf.length >= 4);
uint _mask = LOW_28_MASK;
assembly {
// load the first word of
let _word := mload(add(_buf, 0x20))
// mask out the top 4 bytes
// /x
_word := and(_word, _mask)
_word := or(_newSelector, _word)
mstore(add(_buf, 0x20), _word)
}
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@layerzerolabs/solidity-examples/contracts/lzApp/interfaces/ILayerZeroReceiver.sol";
import "@layerzerolabs/solidity-examples/contracts/lzApp/interfaces/ILayerZeroUserApplicationConfig.sol";
import "@layerzerolabs/solidity-examples/contracts/lzApp/interfaces/ILayerZeroEndpoint.sol";
import "@layerzerolabs/solidity-examples/contracts/libraries/BytesLib.sol";
/*
* a generic LzReceiver implementation
*/
abstract contract LzApp is
OwnableUpgradeable,
ILayerZeroReceiver,
ILayerZeroUserApplicationConfig
{
using BytesLib for bytes;
// ua can not send payload larger than this by default, but it can be changed by the ua owner
uint public constant DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;
ILayerZeroEndpoint public lzEndpoint;
mapping(uint16 => bytes) public trustedRemoteLookup;
mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
mapping(uint16 => uint) public payloadSizeLimitLookup;
address public precrime;
event SetPrecrime(address precrime);
event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);
function lzReceive(
uint16 _srcChainId,
bytes calldata _srcAddress,
uint64 _nonce,
bytes calldata _payload
) public virtual override {
// lzReceive must be called by the endpoint for security
require(
_msgSender() == address(lzEndpoint),
"LzApp: invalid endpoint caller"
);
bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
// if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
require(
_srcAddress.length == trustedRemote.length &&
trustedRemote.length > 0 &&
keccak256(_srcAddress) == keccak256(trustedRemote),
"LzApp: invalid source sending contract"
);
_blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
// abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
function _blockingLzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual;
function _lzSend(
uint16 _dstChainId,
bytes memory _payload,
address payable _refundAddress,
address _zroPaymentAddress,
bytes memory _adapterParams,
uint _nativeFee
) internal virtual {
bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
require(
trustedRemote.length != 0,
"LzApp: destination chain is not a trusted source"
);
_checkPayloadSize(_dstChainId, _payload.length);
lzEndpoint.send{value: _nativeFee}(
_dstChainId,
trustedRemote,
_payload,
_refundAddress,
_zroPaymentAddress,
_adapterParams
);
}
function _checkGasLimit(
uint16 _dstChainId,
uint16 _type,
bytes memory _adapterParams,
uint _extraGas
) internal view virtual {
uint providedGasLimit = _getGasLimit(_adapterParams);
uint minGasLimit = minDstGasLookup[_dstChainId][_type];
require(minGasLimit > 0, "LzApp: minGasLimit not set");
require(
providedGasLimit >= minGasLimit + _extraGas,
"LzApp: gas limit is too low"
);
}
function _getGasLimit(
bytes memory _adapterParams
) internal pure virtual returns (uint gasLimit) {
require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
assembly {
gasLimit := mload(add(_adapterParams, 34))
}
}
function _checkPayloadSize(
uint16 _dstChainId,
uint _payloadSize
) internal view virtual {
uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
if (payloadSizeLimit == 0) {
// use default if not set
payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
}
require(
_payloadSize <= payloadSizeLimit,
"LzApp: payload size is too large"
);
}
//---------------------------UserApplication config----------------------------------------
function getConfig(
uint16 _version,
uint16 _chainId,
address,
uint _configType
) external view returns (bytes memory) {
return
lzEndpoint.getConfig(
_version,
_chainId,
address(this),
_configType
);
}
// generic config for LayerZero user Application
function setConfig(
uint16 _version,
uint16 _chainId,
uint _configType,
bytes calldata _config
) external override onlyOwner {
lzEndpoint.setConfig(_version, _chainId, _configType, _config);
}
function setSendVersion(uint16 _version) external override onlyOwner {
lzEndpoint.setSendVersion(_version);
}
function setReceiveVersion(uint16 _version) external override onlyOwner {
lzEndpoint.setReceiveVersion(_version);
}
function forceResumeReceive(
uint16 _srcChainId,
bytes calldata _srcAddress
) external override onlyOwner {
lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
}
// _path = abi.encodePacked(remoteAddress, localAddress)
// this function set the trusted path for the cross-chain communication
function setTrustedRemote(
uint16 _remoteChainId,
bytes calldata _path
) external onlyOwner {
trustedRemoteLookup[_remoteChainId] = _path;
emit SetTrustedRemote(_remoteChainId, _path);
}
function setTrustedRemoteAddress(
uint16 _remoteChainId,
bytes calldata _remoteAddress
) external onlyOwner {
trustedRemoteLookup[_remoteChainId] = abi.encodePacked(
_remoteAddress,
address(this)
);
emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
}
function getTrustedRemoteAddress(
uint16 _remoteChainId
) external view returns (bytes memory) {
bytes memory path = trustedRemoteLookup[_remoteChainId];
require(path.length != 0, "LzApp: no trusted path record");
return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
}
function setPrecrime(address _precrime) external onlyOwner {
precrime = _precrime;
emit SetPrecrime(_precrime);
}
function setMinDstGas(
uint16 _dstChainId,
uint16 _packetType,
uint _minGas
) external onlyOwner {
minDstGasLookup[_dstChainId][_packetType] = _minGas;
emit SetMinDstGas(_dstChainId, _packetType, _minGas);
}
// if the size is 0, it means default size limit
function setPayloadSizeLimit(
uint16 _dstChainId,
uint _size
) external onlyOwner {
payloadSizeLimitLookup[_dstChainId] = _size;
}
//--------------------------- VIEW FUNCTION ----------------------------------------
function isTrustedRemote(
uint16 _srcChainId,
bytes calldata _srcAddress
) external view returns (bool) {
bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
return keccak256(trustedSource) == keccak256(_srcAddress);
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./LzApp.sol";
import "../libraries/ExcessivelySafeCall.sol";
/*
* the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
* this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
* NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
*/
abstract contract NonblockingLzApp is LzApp {
using ExcessivelySafeCall for address;
mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32)))
public failedMessages;
event MessageFailed(
uint16 _srcChainId,
bytes _srcAddress,
uint64 _nonce,
bytes _payload,
bytes _reason
);
event RetryMessageSuccess(
uint16 _srcChainId,
bytes _srcAddress,
uint64 _nonce,
bytes32 _payloadHash
);
// overriding the virtual function in LzReceiver
function _blockingLzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual override {
(bool success, bytes memory reason) = address(this).excessivelySafeCall(
gasleft(),
150,
abi.encodeWithSelector(
this.nonblockingLzReceive.selector,
_srcChainId,
_srcAddress,
_nonce,
_payload
)
);
if (!success) {
_storeFailedMessage(
_srcChainId,
_srcAddress,
_nonce,
_payload,
reason
);
}
}
function _storeFailedMessage(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload,
bytes memory _reason
) internal virtual {
failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
}
function nonblockingLzReceive(
uint16 _srcChainId,
bytes calldata _srcAddress,
uint64 _nonce,
bytes calldata _payload
) public virtual {
// only internal transaction
require(
_msgSender() == address(this),
"NonblockingLzApp: caller must be LzApp"
);
_nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
//@notice override this function
function _nonblockingLzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual;
function retryMessage(
uint16 _srcChainId,
bytes calldata _srcAddress,
uint64 _nonce,
bytes calldata _payload
) public payable virtual {
// assert there is message to retry
bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
require(
payloadHash != bytes32(0),
"NonblockingLzApp: no stored message"
);
require(
keccak256(_payload) == payloadHash,
"NonblockingLzApp: invalid payload"
);
// clear the stored message
failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
// execute the message. revert if it fails again
_nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
}
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./OFT/lzApp/NonblockingLzApp.sol";
import "./OFT/libraries/ExcessivelySafeCall.sol";
import "./OFT/interfaces/ICommonOFT.sol";
import "./OFT/interfaces/IOFTReceiverV2.sol";
abstract contract OFTCoreV2Initializable is NonblockingLzApp {
using BytesLib for bytes;
using ExcessivelySafeCall for address;
uint public constant NO_EXTRA_GAS = 0;
// packet type
uint8 public constant PT_SEND = 0;
uint8 public constant PT_SEND_AND_CALL = 1;
uint8 public constant sharedDecimals = 8;
mapping(uint16 => mapping(bytes => mapping(uint64 => bool)))
public creditedPackets;
/**
* @dev Emitted when `_amount` tokens are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
* `_nonce` is the outbound nonce
*/
event SendToChain(
uint16 indexed _dstChainId,
address indexed _from,
bytes32 indexed _toAddress,
uint _amount
);
/**
* @dev Emitted when `_amount` tokens are received from `_srcChainId` into the `_toAddress` on the local chain.
* `_nonce` is the inbound nonce.
*/
event ReceiveFromChain(
uint16 indexed _srcChainId,
address indexed _to,
uint _amount
);
event CallOFTReceivedSuccess(
uint16 indexed _srcChainId,
bytes _srcAddress,
uint64 _nonce,
bytes32 _hash
);
event NonContractAddress(address _address);
/************************************************************************
* public functions
************************************************************************/
function callOnOFTReceived(
uint16 _srcChainId,
bytes calldata _srcAddress,
uint64 _nonce,
bytes32 _from,
address _to,
uint _amount,
bytes calldata _payload,
uint _gasForCall
) public virtual {
require(
_msgSender() == address(this),
"OFTCore: caller must be OFTCore"
);
// send
_amount = _transferFrom(address(this), _to, _amount);
emit ReceiveFromChain(_srcChainId, _to, _amount);
// call
IOFTReceiverV2(_to).onOFTReceived{gas: _gasForCall}(
_srcChainId,
_srcAddress,
_nonce,
_from,
_amount,
_payload
);
}
/************************************************************************
* internal functions
************************************************************************/
function _estimateSendFee(
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bool _useZro,
bytes memory _adapterParams
) internal view virtual returns (uint nativeFee, uint zroFee) {
// mock the payload for sendFrom()
bytes memory payload = _encodeSendPayload(_toAddress, _ld2sd(_amount));
return
lzEndpoint.estimateFees(
_dstChainId,
address(this),
payload,
_useZro,
_adapterParams
);
}
function _estimateSendAndCallFee(
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bytes memory _payload,
uint64 _dstGasForCall,
bool _useZro,
bytes memory _adapterParams
) internal view virtual returns (uint nativeFee, uint zroFee) {
// mock the payload for sendAndCall()
bytes memory payload = _encodeSendAndCallPayload(
msg.sender,
_toAddress,
_ld2sd(_amount),
_payload,
_dstGasForCall
);
return
lzEndpoint.estimateFees(
_dstChainId,
address(this),
payload,
_useZro,
_adapterParams
);
}
function _nonblockingLzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual override {
uint8 packetType = _payload.toUint8(0);
if (packetType == PT_SEND) {
_sendAck(_srcChainId, _srcAddress, _nonce, _payload);
} else if (packetType == PT_SEND_AND_CALL) {
_sendAndCallAck(_srcChainId, _srcAddress, _nonce, _payload);
} else {
revert("OFTCore: unknown packet type");
}
}
function _send(
address _from,
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
address payable _refundAddress,
address _zroPaymentAddress,
bytes memory _adapterParams
) internal virtual returns (uint amount) {
_checkGasLimit(_dstChainId, PT_SEND, _adapterParams, NO_EXTRA_GAS);
(amount, ) = _removeDust(_amount);
amount = _debitFrom(_from, _dstChainId, _toAddress, amount); // amount returned should not have dust
require(amount > 0, "OFTCore: amount too small");
bytes memory lzPayload = _encodeSendPayload(_toAddress, _ld2sd(amount));
_lzSend(
_dstChainId,
lzPayload,
_refundAddress,
_zroPaymentAddress,
_adapterParams,
msg.value
);
emit SendToChain(_dstChainId, _from, _toAddress, amount);
}
function _sendAck(
uint16 _srcChainId,
bytes memory,
uint64,
bytes memory _payload
) internal virtual {
(address to, uint64 amountSD) = _decodeSendPayload(_payload);
if (to == address(0)) {
to = address(0xdead);
}
uint amount = _sd2ld(amountSD);
amount = _creditTo(_srcChainId, to, amount);
emit ReceiveFromChain(_srcChainId, to, amount);
}
function _sendAndCall(
address _from,
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount,
bytes memory _payload,
uint64 _dstGasForCall,
address payable _refundAddress,
address _zroPaymentAddress,
bytes memory _adapterParams
) internal virtual returns (uint amount) {
_checkGasLimit(
_dstChainId,
PT_SEND_AND_CALL,
_adapterParams,
_dstGasForCall
);
(amount, ) = _removeDust(_amount);
amount = _debitFrom(_from, _dstChainId, _toAddress, amount);
require(amount > 0, "OFTCore: amount too small");
// encode the msg.sender into the payload instead of _from
bytes memory lzPayload = _encodeSendAndCallPayload(
msg.sender,
_toAddress,
_ld2sd(amount),
_payload,
_dstGasForCall
);
_lzSend(
_dstChainId,
lzPayload,
_refundAddress,
_zroPaymentAddress,
_adapterParams,
msg.value
);
emit SendToChain(_dstChainId, _from, _toAddress, amount);
}
function _sendAndCallAck(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual {
(
bytes32 from,
address to,
uint64 amountSD,
bytes memory payloadForCall,
uint64 gasForCall
) = _decodeSendAndCallPayload(_payload);
bool credited = creditedPackets[_srcChainId][_srcAddress][_nonce];
uint amount = _sd2ld(amountSD);
// credit to this contract first, and then transfer to receiver only if callOnOFTReceived() succeeds
if (!credited) {
amount = _creditTo(_srcChainId, address(this), amount);
creditedPackets[_srcChainId][_srcAddress][_nonce] = true;
}
if (!_isContract(to)) {
emit NonContractAddress(to);
return;
}
// workaround for stack too deep
uint16 srcChainId = _srcChainId;
bytes memory srcAddress = _srcAddress;
uint64 nonce = _nonce;
bytes memory payload = _payload;
bytes32 from_ = from;
address to_ = to;
uint amount_ = amount;
bytes memory payloadForCall_ = payloadForCall;
// no gas limit for the call if retry
uint gas = credited ? gasleft() : gasForCall;
(bool success, bytes memory reason) = address(this).excessivelySafeCall(
gasleft(),
150,
abi.encodeWithSelector(
this.callOnOFTReceived.selector,
srcChainId,
srcAddress,
nonce,
from_,
to_,
amount_,
payloadForCall_,
gas
)
);
if (success) {
bytes32 hash = keccak256(payload);
emit CallOFTReceivedSuccess(srcChainId, srcAddress, nonce, hash);
} else {
// store the failed message into the nonblockingLzApp
_storeFailedMessage(srcChainId, srcAddress, nonce, payload, reason);
}
}
function _isContract(address _account) internal view returns (bool) {
return _account.code.length > 0;
}
function _ld2sd(uint _amount) internal view virtual returns (uint64) {
uint amountSD = _amount / _ld2sdRate();
require(amountSD <= type(uint64).max, "OFTCore: amountSD overflow");
return uint64(amountSD);
}
function _sd2ld(uint64 _amountSD) internal view virtual returns (uint) {
return _amountSD * _ld2sdRate();
}
function _removeDust(
uint _amount
) internal view virtual returns (uint amountAfter, uint dust) {
dust = _amount % _ld2sdRate();
amountAfter = _amount - dust;
}
function _encodeSendPayload(
bytes32 _toAddress,
uint64 _amountSD
) internal view virtual returns (bytes memory) {
return abi.encodePacked(PT_SEND, _toAddress, _amountSD);
}
function _decodeSendPayload(
bytes memory _payload
) internal view virtual returns (address to, uint64 amountSD) {
require(
_payload.toUint8(0) == PT_SEND && _payload.length == 41,
"OFTCore: invalid payload"
);
to = _payload.toAddress(13); // drop the first 12 bytes of bytes32
amountSD = _payload.toUint64(33);
}
function _encodeSendAndCallPayload(
address _from,
bytes32 _toAddress,
uint64 _amountSD,
bytes memory _payload,
uint64 _dstGasForCall
) internal view virtual returns (bytes memory) {
return
abi.encodePacked(
PT_SEND_AND_CALL,
_toAddress,
_amountSD,
_addressToBytes32(_from),
_dstGasForCall,
_payload
);
}
function _decodeSendAndCallPayload(
bytes memory _payload
)
internal
view
virtual
returns (
bytes32 from,
address to,
uint64 amountSD,
bytes memory payload,
uint64 dstGasForCall
)
{
require(
_payload.toUint8(0) == PT_SEND_AND_CALL,
"OFTCore: invalid payload"
);
to = _payload.toAddress(13); // drop the first 12 bytes of bytes32
amountSD = _payload.toUint64(33);
from = _payload.toBytes32(41);
dstGasForCall = _payload.toUint64(73);
payload = _payload.slice(81, _payload.length - 81);
}
function _addressToBytes32(
address _address
) internal pure virtual returns (bytes32) {
return bytes32(uint(uint160(_address)));
}
function _debitFrom(
address _from,
uint16 _dstChainId,
bytes32 _toAddress,
uint _amount
) internal virtual returns (uint);
function _creditTo(
uint16 _srcChainId,
address _toAddress,
uint _amount
) internal virtual returns (uint);
function _transferFrom(
address _from,
address _to,
uint _amount
) internal virtual returns (uint);
function _ld2sdRate() internal view virtual returns (uint);
} <i class='far fa-question-circle text-muted ms-2' data-bs-trigger='hover' data-bs-toggle='tooltip' data-bs-html='true' data-bs-title='Click on the check box to select individual contract to compare. Only 1 contract can be selected from each side.'></i>
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./BaseOFTV2Initializable.sol";
abstract contract OFTV2Initializable is BaseOFTV2Initializable {
uint internal constant ld2sdRate = 10 ** 8;
/************************************************************************
* public functions
************************************************************************/
function token() public view virtual override returns (address) {
return address(this);
}
function _ld2sdRate() internal view virtual override returns (uint) {
return ld2sdRate;
}
}