Contract Source Code:

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

contract ERC20 is IERC20 {
    mapping(address => uint256) internal _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 internal _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public pure returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply - balanceOf(address(0));
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = msg.sender;
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = msg.sender;
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = msg.sender;
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = msg.sender;
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = msg.sender;
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        //overriden
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IDEXFactory {
  function createPair(address tokenA, address tokenB) external returns (address pair);
  function getPair(address tokenA, address tokenB) external view returns (address pair);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IDEXRouter {
  function factory() external pure returns (address);

  function WETH() external pure returns (address);

  function addLiquidity(
    address tokenA,
    address tokenB,
    uint256 amountADesired,
    uint256 amountBDesired,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  )
    external
    returns (
      uint256 amountA,
      uint256 amountB,
      uint256 liquidity
    );

  function addLiquidityETH(
    address token,
    uint256 amountTokenDesired,
    uint256 amountTokenMin,
    uint256 amountETHMin,
    address to,
    uint256 deadline
  )
    external
    payable
    returns (
      uint256 amountToken,
      uint256 amountETH,
      uint256 liquidity
    );

  function swapExactTokensForTokensSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;

  function swapExactETHForTokensSupportingFeeOnTransferTokens(
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external payable;

  function swapExactTokensForETHSupportingFeeOnTransferTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external;

  function removeLiquidity(
    address tokenA,
    address tokenB,
    uint256 liquidity,
    uint256 amountAMin,
    uint256 amountBMin,
    address to,
    uint256 deadline
  ) external returns (uint256 amountA, uint256 amountB);

  function swapExactTokensForTokens(
    uint256 amountIn,
    uint256 amountOutMin,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function swapTokensForExactTokens(
    uint256 amountOut,
    uint256 amountInMax,
    address[] calldata path,
    address to,
    uint256 deadline
  ) external returns (uint256[] memory amounts);

  function getAmountsOut(uint256 amountIn, address[] calldata path) external view returns (uint256[] memory amounts);
}

// SPDX-License-Identifier: MIT
//
// ███████╗██╗      ██████╗ ███╗   ██╗
// ██╔════╝██║     ██╔═══██╗████╗  ██║
// █████╗  ██║     ██║   ██║██╔██╗ ██║
// ██╔══╝  ██║     ██║   ██║██║╚██╗██║
// ███████╗███████╗╚██████╔╝██║ ╚████║
// ╚══════╝╚══════╝ ╚═════╝ ╚═╝  ╚═══╝
// ██████╗  █████╗ ██╗██████╗ ███████╗
// ██╔══██╗██╔══██╗██║██╔══██╗██╔════╝
// ██████╔╝███████║██║██║  ██║███████╗
// ██╔══██╗██╔══██║██║██║  ██║╚════██║
// ██║  ██║██║  ██║██║██████╔╝███████║
// ╚═╝  ╚═╝╚═╝  ╚═╝╚═╝╚═════╝ ╚══════╝
// ███╗   ███╗ █████╗ ██████╗ ███████╗
// ████╗ ████║██╔══██╗██╔══██╗██╔════╝
// ██╔████╔██║███████║██████╔╝███████╗
// ██║╚██╔╝██║██╔══██║██╔══██╗╚════██║
// ██║ ╚═╝ ██║██║  ██║██║  ██║███████║
// ╚═╝     ╚═╝╚═╝  ╚═╝╚═╝  ╚═╝╚══════╝
//
// ELON RAIDS MARS ($RAID)
// ERC-20 Token Contract
//
// https://ElonRaidsMars.com
// https://t.me/ElonRaidsMars
// https://x.com/ElonRaidsMars

pragma solidity 0.8.28;

import "./ERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

import "./interfaces/IDEXFactory.sol";
import "./interfaces/IDEXRouter.sol";

contract RAID is ERC20, Ownable {
    mapping (address => bool) public isExcludedFromFee;
    address payable public treasuryAddress;
    address payable public marketingAddress;
    uint256 public buyFeePercent;
    uint256 public sellFeePercent;
    uint256 public collectedTaxThreshold;
    uint256 public maxWalletSize;
    address public uniswapV2Pair;
    bool public autoTaxDistributionEnabled = true;
    bool private inInternalSwap;
    bool private _tradingOpen;
    IDEXRouter public uniswapV2Router = IDEXRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);

    modifier lockTheSwap {
        inInternalSwap = true;
        _;
        inInternalSwap = false;
    }

    constructor(
        address payable _treasuryAddress,
        address payable _marketingAddress,
        uint256 _feePercent,
        string memory name,
        string memory symbol
    ) ERC20(name, symbol) {
        treasuryAddress = _treasuryAddress;
        marketingAddress = _marketingAddress;
        buyFeePercent = _feePercent;
        sellFeePercent = _feePercent;
        isExcludedFromFee[owner()] = true;
        isExcludedFromFee[address(this)] = true;
        isExcludedFromFee[_treasuryAddress] = true;
        isExcludedFromFee[_marketingAddress] = true;

        _mint(msg.sender, 100_000_000 * 10 ** decimals());
        collectedTaxThreshold = _totalSupply / 2000;
        maxWalletSize = _totalSupply / 50;
        uniswapV2Pair = IDEXFactory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
    }

    function enableTrading() external onlyOwner {
        require(!_tradingOpen, "Trading is already open");
        _tradingOpen = true;
    }

    function _transfer(address from, address to, uint256 amount) internal override(ERC20) {
        require(from != address(0), "ERC20: transfer from invalid");
        require(amount > 0, "Transfer amount must be greater than zero");
        uint256 taxAmount = 0;
        address _uniswapV2Pair = uniswapV2Pair;
        if (!isExcludedFromFee[from] && !isExcludedFromFee[to]) {
            require(_tradingOpen, "Trading closed");
            bool _isTransfer = from != _uniswapV2Pair && to != _uniswapV2Pair;
            uint256 _feePercent;
            if (!inInternalSwap && !_isTransfer) {
                if (to == _uniswapV2Pair) {
                    _feePercent = sellFeePercent;
                } else {
                    _feePercent = buyFeePercent;
                }
                uint256 _collectedTaxThreshold = collectedTaxThreshold;
                taxAmount = amount * _feePercent / 100;
                uint256 contractBalance = balanceOf(address(this));
                if (from != _uniswapV2Pair && autoTaxDistributionEnabled && contractBalance > _collectedTaxThreshold) {
                    if (contractBalance > _collectedTaxThreshold * 20) contractBalance = _collectedTaxThreshold * 20;
                    _distributeTaxes(contractBalance);
                }
            }
            if (to != _uniswapV2Pair && to != address(uniswapV2Router)) {
                require(balanceOf(to) + amount - taxAmount <= maxWalletSize, "Exceeds the maxWalletSize");
            }
        }

        _balances[from]= _balances[from] - amount;
        _balances[to]= _balances[to] + amount - taxAmount;

        emit Transfer(from, to, amount - taxAmount);

        if (taxAmount > 0) {
          _balances[address(this)]=_balances[address(this)] + taxAmount;
          emit Transfer(from, address(this), taxAmount);
        }
    }

    function _swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();
        _approve(address(this), address(uniswapV2Router), tokenAmount);
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }

    function setAutoTaxDistributionEnabled(bool _enabled) external onlyOwner {
        autoTaxDistributionEnabled = _enabled;
    }

    function setFees(uint256 _buyFeePercent, uint256 _sellFeePercent) external onlyOwner{
        buyFeePercent = _buyFeePercent;
        sellFeePercent = _sellFeePercent;
    }

    function setMaxWalletSize(uint256 _maxWalletSize) external onlyOwner {
        maxWalletSize = _maxWalletSize;
    }

    function setExcludeFromFee(address _address, bool _excluded) external onlyOwner {
        isExcludedFromFee[_address] = _excluded;
    }

    function setTreasuryAddress(address payable _treasuryAddress) external onlyOwner {
        treasuryAddress = _treasuryAddress;
        isExcludedFromFee[_treasuryAddress] = true;
    }

    function setMarketingAddress(address payable _marketingAddress) external onlyOwner {
        marketingAddress = _marketingAddress;
        isExcludedFromFee[_marketingAddress] = true;
    }

    function setTaxThreshold(uint256 _newThreshold) external {
        require(msg.sender == treasuryAddress, "NOT_AUTHORIZED");
        collectedTaxThreshold = _newThreshold;
    }

    function distributeTaxes(uint256 amount) external {
        require(msg.sender == treasuryAddress, "NOT_AUTHORIZED");
        _distributeTaxes(amount);
    }

    function _distributeTaxes(uint256 amount) internal {
        _swapTokensForEth(amount);
        uint256 contractETHBalance = address(this).balance;

        if (contractETHBalance > 0) {
            uint256 half = contractETHBalance / 2;
            uint256 otherHalf = contractETHBalance - half;
            (bool sent, ) = treasuryAddress.call{value: half}("");
            (bool sent2, ) = marketingAddress.call{value: otherHalf}("");
            require(sent && sent2, "Failed to send Eth");
        }
    }

    function recoverERC20(IERC20 token) external {
        require(msg.sender == treasuryAddress, "NOT_AUTHORIZED");
        uint256 balance = token.balanceOf(address(this));
        bool sent = token.transfer(msg.sender, balance);
        require(sent, "Failed to send token");
    }

    receive() external payable {}
}