Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.8.22;

import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Pausable} from "@openzeppelin/contracts/utils/Pausable.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {AggregatorV3Interface} from "@chainlink/contracts/src/v0.8/interfaces/AggregatorV3Interface.sol";

contract FifthScapeSaleEthereum is Ownable, Pausable, ReentrancyGuard {
    using SafeERC20 for IERC20;

    IERC20 public s_usdt;

    address public i_eth_usd_priceFeed;
    address public i_usdt_usd_priceFeed;

    uint256 public s_usdtPrice = 1871;
    uint256 public s_minAmountToInvest = 10;
    uint256 public s_maxAmountToInvest = 5000000000;
    uint256 public s_tokenSold;

    mapping(address => uint256) public s_investemetByAddress;

    constructor(
        address _usdt,
        address _owner
    ) Ownable(_owner) {
        if (block.chainid == 1) {
            i_eth_usd_priceFeed = 0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419;
            i_usdt_usd_priceFeed = 0x3E7d1eAB13ad0104d2750B8863b489D65364e32D;
            s_usdt = IERC20(_usdt);
        } else {
            i_eth_usd_priceFeed = 0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419;
            i_usdt_usd_priceFeed = 0x3E7d1eAB13ad0104d2750B8863b489D65364e32D;
            s_usdt = IERC20(_usdt);
        }
    }

    function _multiply(uint256 x, uint256 y) internal pure returns (uint256 z) {
        require(y == 0 || (z = x * y) / y == x);
    }

    function _div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    function _getDerivedPrice(
        address _base,
        address _quote,
        uint8 _decimals
    ) internal view returns (int256) {
        require(
            _decimals > uint8(0) && _decimals <= uint8(18),
            "Invalid decimals"
        );
        int256 decimals = int256(10 ** uint256(_decimals));
        (, int256 basePrice, , , ) = AggregatorV3Interface(_base)
            .latestRoundData();
        uint8 baseDecimals = AggregatorV3Interface(_base).decimals();
        basePrice = _scalePrice(basePrice, baseDecimals, _decimals);

        (, int256 quotePrice, , , ) = AggregatorV3Interface(_quote)
            .latestRoundData();
        uint8 quoteDecimals = AggregatorV3Interface(_quote).decimals();
        quotePrice = _scalePrice(quotePrice, quoteDecimals, _decimals);

        return (basePrice * decimals) / quotePrice;
    }

    function _scalePrice(
        int256 _price,
        uint8 _priceDecimals,
        uint8 _decimals
    ) internal pure returns (int256) {
        if (_priceDecimals < _decimals) {
            return _price * int256(10 ** uint256(_decimals - _priceDecimals));
        } else if (_priceDecimals > _decimals) {
            return _price / int256(10 ** uint256(_priceDecimals - _decimals));
        }
        return _price;
    }

    event BoughtWithNativeToken(address user, uint256 amount, uint256 time);
    event BoughtWithUSDT(address user, uint256 amount, uint256 time);
    event BoughtTokensWithWert(address _user, uint256 _amount, uint _price);

    function buyTokensNative() external payable whenNotPaused {
        (bool sent, ) = payable(owner()).call{value: msg.value}("");
        require(sent, "Funds transfer unsuccesfull");
        emit BoughtWithNativeToken(msg.sender, msg.value, block.timestamp);
    }

    function buyTokensUSDT(uint256 amount) external whenNotPaused {
        s_usdt.safeTransferFrom(msg.sender, owner(), amount);
        emit BoughtWithUSDT(msg.sender, amount, block.timestamp);
    }

   

    function buyTokensWert(address user, uint256 amount, uint256 price) external payable whenNotPaused nonReentrant {

        (bool sent, ) = payable(owner()).call{value: msg.value}("");
        require(sent, "Funds transfer unsuccesfull");

         // Print the _user address and the amount
        emit BoughtTokensWithWert(user, amount, price);
    }

    function updateMaxInvestment(uint256 amount) external onlyOwner {
        s_maxAmountToInvest = amount;
    }

    function updateMinInvestment(uint256 amount) external onlyOwner {
        s_minAmountToInvest = amount;
    }

    function pause() external whenNotPaused onlyOwner {
        _pause();
    }

    function unpause() external whenPaused onlyOwner {
        _unpause();
    }

    function withdrawERC20(
        address _tokenAddress,
        uint256 _amount
    ) external onlyOwner {
        IERC20 currentToken = IERC20(_tokenAddress);
        currentToken.approve(address(this), _amount);
        currentToken.safeTransferFrom(address(this), owner(), _amount);
    }

    function withdrawNative(uint256 _amount) external onlyOwner {
        (bool hs, ) = payable(owner()).call{value: _amount}("");
        require(hs, "EnergiWanBridge:: Failed to withdraw native coins");
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface AggregatorV3Interface {
  function decimals() external view returns (uint8);

  function description() external view returns (string memory);

  function version() external view returns (uint256);

  function getRoundData(
    uint80 _roundId
  ) external view returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);

  function latestRoundData()
    external
    view
    returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_usdt","type":"address"},{"internalType":"address","name":"_owner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_user","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_price","type":"uint256"}],"name":"BoughtTokensWithWert","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"time","type":"uint256"}],"name":"BoughtWithNativeToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"time","type":"uint256"}],"name":"BoughtWithUSDT","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"buyTokensNative","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"buyTokensUSDT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"price","type":"uint256"}],"name":"buyTokensWert","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"i_eth_usd_priceFeed","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"i_usdt_usd_priceFeed","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"s_investemetByAddress","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"s_maxAmountToInvest","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"s_minAmountToInvest","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"s_tokenSold","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"s_usdt","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"s_usdtPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"updateMaxInvestment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"updateMinInvestment","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_tokenAddress","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdrawERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdrawNative","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec70000000000000000000000002f893f7a0e15a6df9320cf0ae7087de228482c1f

-----Decoded View---------------
Arg [0] : _usdt (address): 0xdAC17F958D2ee523a2206206994597C13D831ec7
Arg [1] : _owner (address): 0x2F893f7a0E15a6dF9320cf0aE7087De228482C1F

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000dac17f958d2ee523a2206206994597c13d831ec7
Arg [1] : 0000000000000000000000002f893f7a0e15a6df9320cf0ae7087de228482c1f