// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { OwnableUpgradeable } from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import { ISemver } from "src/universal/ISemver.sol";

import { IDelayedWETH } from "src/dispute/interfaces/IDelayedWETH.sol";
import { IWETH } from "src/dispute/interfaces/IWETH.sol";
import { WETH98 } from "src/dispute/weth/WETH98.sol";

import { SuperchainConfig } from "src/L1/SuperchainConfig.sol";

/// @title DelayedWETH
/// @notice DelayedWETH is an extension to WETH9 that allows for delayed withdrawals. Accounts must trigger an unlock
///         function before they can withdraw WETH. Accounts must trigger unlock by specifying a sub-account and an
///         amount of WETH to unlock. Accounts can trigger the unlock function at any time, but must wait a delay
///         period before they can withdraw after the unlock function is triggered. DelayedWETH is designed to be used
///         by the DisputeGame contracts where unlock will only be triggered after a dispute is resolved. DelayedWETH
///         is meant to sit behind a proxy contract and has an owner address that can pull WETH from any account and
///         can recover ETH from the contract itself. Variable and function naming vaguely follows the vibe of WETH9.
///         Not the prettiest contract in the world, but it gets the job done.
contract DelayedWETH is OwnableUpgradeable, WETH98, IDelayedWETH, ISemver {
    /// @notice Semantic version.
    /// @custom:semver 1.1.0
    string public constant version = "1.1.0";

    /// @inheritdoc IDelayedWETH
    mapping(address => mapping(address => WithdrawalRequest)) public withdrawals;

    /// @notice Withdrawal delay in seconds.
    uint256 internal immutable DELAY_SECONDS;

    /// @notice Address of the SuperchainConfig contract.
    SuperchainConfig public config;

    /// @param _delay The delay for withdrawals in seconds.
    constructor(uint256 _delay) {
        DELAY_SECONDS = _delay;
        initialize({ _owner: address(0), _config: SuperchainConfig(address(0)) });
    }

    /// @notice Initializes the contract.
    /// @param _owner The address of the owner.
    /// @param _config Address of the SuperchainConfig contract.
    function initialize(address _owner, SuperchainConfig _config) public initializer {
        __Ownable_init();
        _transferOwnership(_owner);
        config = _config;
    }

    /// @inheritdoc IDelayedWETH
    function delay() external view returns (uint256) {
        return DELAY_SECONDS;
    }

    /// @inheritdoc IDelayedWETH
    function unlock(address _guy, uint256 _wad) external {
        // Note that the unlock function can be called by any address, but the actual unlocking capability still only
        // gives the msg.sender the ability to withdraw from the account. As long as the unlock and withdraw functions
        // are called with the proper recipient addresses, this will be safe. Could be made safer by having external
        // accounts execute withdrawals themselves but that would have added extra complexity and made DelayedWETH a
        // leaky abstraction, so we chose this instead.
        WithdrawalRequest storage wd = withdrawals[msg.sender][_guy];
        wd.timestamp = block.timestamp;
        wd.amount += _wad;
    }

    /// @inheritdoc IWETH
    function withdraw(uint256 _wad) public override(WETH98, IWETH) {
        withdraw(msg.sender, _wad);
    }

    /// @inheritdoc IDelayedWETH
    function withdraw(address _guy, uint256 _wad) public {
        require(!config.paused(), "DelayedWETH: contract is paused");
        WithdrawalRequest storage wd = withdrawals[msg.sender][_guy];
        require(wd.amount >= _wad, "DelayedWETH: insufficient unlocked withdrawal");
        require(wd.timestamp > 0, "DelayedWETH: withdrawal not unlocked");
        require(wd.timestamp + DELAY_SECONDS <= block.timestamp, "DelayedWETH: withdrawal delay not met");
        wd.amount -= _wad;
        super.withdraw(_wad);
    }

    /// @inheritdoc IDelayedWETH
    function recover(uint256 _wad) external {
        require(msg.sender == owner(), "DelayedWETH: not owner");
        uint256 amount = _wad < address(this).balance ? _wad : address(this).balance;
        (bool success,) = payable(msg.sender).call{ value: amount }(hex"");
        require(success, "DelayedWETH: recover failed");
    }

    /// @inheritdoc IDelayedWETH
    function hold(address _guy, uint256 _wad) external {
        require(msg.sender == owner(), "DelayedWETH: not owner");
        allowance[_guy][msg.sender] = _wad;
        emit Approval(_guy, msg.sender, _wad);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title ISemver
/// @notice ISemver is a simple contract for ensuring that contracts are
///         versioned using semantic versioning.
interface ISemver {
    /// @notice Getter for the semantic version of the contract. This is not
    ///         meant to be used onchain but instead meant to be used by offchain
    ///         tooling.
    /// @return Semver contract version as a string.
    function version() external view returns (string memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import { IWETH } from "src/dispute/interfaces/IWETH.sol";

/// @title IDelayedWETH
/// @notice Interface for the DelayedWETH contract.
interface IDelayedWETH is IWETH {
    /// @notice Represents a withdrawal request.
    struct WithdrawalRequest {
        uint256 amount;
        uint256 timestamp;
    }

    /// @notice Emitted when an unwrap is started.
    /// @param src The address that started the unwrap.
    /// @param wad The amount of WETH that was unwrapped.
    event Unwrap(address indexed src, uint256 wad);

    /// @notice Returns the withdrawal delay in seconds.
    /// @return The withdrawal delay in seconds.
    function delay() external view returns (uint256);

    /// @notice Returns a withdrawal request for the given address.
    /// @param _owner The address to query the withdrawal request of.
    /// @param _guy Sub-account to query the withdrawal request of.
    /// @return The withdrawal request for the given address-subaccount pair.
    function withdrawals(address _owner, address _guy) external view returns (uint256, uint256);

    /// @notice Unlocks withdrawals for the sender's account, after a time delay.
    /// @param _guy Sub-account to unlock.
    /// @param _wad The amount of WETH to unlock.
    function unlock(address _guy, uint256 _wad) external;

    /// @notice Extension to withdrawal, must provide a sub-account to withdraw from.
    /// @param _guy Sub-account to withdraw from.
    /// @param _wad The amount of WETH to withdraw.
    function withdraw(address _guy, uint256 _wad) external;

    /// @notice Allows the owner to recover from error cases by pulling ETH out of the contract.
    /// @param _wad The amount of WETH to recover.
    function recover(uint256 _wad) external;

    /// @notice Allows the owner to recover from error cases by pulling ETH from a specific owner.
    /// @param _guy The address to recover the WETH from.
    /// @param _wad The amount of WETH to recover.
    function hold(address _guy, uint256 _wad) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title IWETH
/// @notice Interface for WETH9.
interface IWETH {
    /// @notice Emitted when an approval is made.
    /// @param src The address that approved the transfer.
    /// @param guy The address that was approved to transfer.
    /// @param wad The amount that was approved to transfer.
    event Approval(address indexed src, address indexed guy, uint256 wad);

    /// @notice Emitted when a transfer is made.
    /// @param src The address that transferred the WETH.
    /// @param dst The address that received the WETH.
    /// @param wad The amount of WETH that was transferred.
    event Transfer(address indexed src, address indexed dst, uint256 wad);

    /// @notice Emitted when a deposit is made.
    /// @param dst The address that deposited the WETH.
    /// @param wad The amount of WETH that was deposited.
    event Deposit(address indexed dst, uint256 wad);

    /// @notice Emitted when a withdrawal is made.
    /// @param src The address that withdrew the WETH.
    /// @param wad The amount of WETH that was withdrawn.
    event Withdrawal(address indexed src, uint256 wad);

    /// @notice Returns the name of the token.
    /// @return The name of the token.
    function name() external view returns (string memory);

    /// @notice Returns the symbol of the token.
    /// @return The symbol of the token.
    function symbol() external view returns (string memory);

    /// @notice Returns the number of decimals the token uses.
    /// @return The number of decimals the token uses.
    function decimals() external pure returns (uint8);

    /// @notice Returns the balance of the given address.
    /// @param owner The address to query the balance of.
    /// @return The balance of the given address.
    function balanceOf(address owner) external view returns (uint256);

    /// @notice Returns the amount of WETH that the spender can transfer on behalf of the owner.
    /// @param owner The address that owns the WETH.
    /// @param spender The address that is approved to transfer the WETH.
    /// @return The amount of WETH that the spender can transfer on behalf of the owner.
    function allowance(address owner, address spender) external view returns (uint256);

    /// @notice Allows WETH to be deposited by sending ether to the contract.
    function deposit() external payable;

    /// @notice Withdraws an amount of ETH.
    /// @param wad The amount of ETH to withdraw.
    function withdraw(uint256 wad) external;

    /// @notice Returns the total supply of WETH.
    /// @return The total supply of WETH.
    function totalSupply() external view returns (uint256);

    /// @notice Approves the given address to transfer the WETH on behalf of the caller.
    /// @param guy The address that is approved to transfer the WETH.
    /// @param wad The amount that is approved to transfer.
    /// @return True if the approval was successful.
    function approve(address guy, uint256 wad) external returns (bool);

    /// @notice Transfers the given amount of WETH to the given address.
    /// @param dst The address to transfer the WETH to.
    /// @param wad The amount of WETH to transfer.
    /// @return True if the transfer was successful.
    function transfer(address dst, uint256 wad) external returns (bool);

    /// @notice Transfers the given amount of WETH from the given address to the given address.
    /// @param src The address to transfer the WETH from.
    /// @param dst The address to transfer the WETH to.
    /// @param wad The amount of WETH to transfer.
    /// @return True if the transfer was successful.
    function transferFrom(address src, address dst, uint256 wad) external returns (bool);
}

// SPDX-License-Identifier: GPL-3.0
// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

// Based on WETH9 by Dapphub.
// Modified by OP Labs.

pragma solidity 0.8.15;

import { IWETH } from "src/dispute/interfaces/IWETH.sol";

/// @title WETH98
/// @notice WETH98 is a version of WETH9 upgraded for Solidity 0.8.x.
contract WETH98 is IWETH {
    uint8 public constant decimals = 18;

    mapping(address => uint256) public balanceOf;
    mapping(address => mapping(address => uint256)) public allowance;

    /// @notice Pipes to deposit.
    receive() external payable {
        deposit();
    }

    /// @notice Pipes to deposit.
    fallback() external payable {
        deposit();
    }

    /// @inheritdoc IWETH
    function name() external view virtual override returns (string memory) {
        return "Wrapped Ether";
    }

    /// @inheritdoc IWETH
    function symbol() external view virtual override returns (string memory) {
        return "WETH";
    }

    /// @inheritdoc IWETH
    function deposit() public payable virtual {
        balanceOf[msg.sender] += msg.value;
        emit Deposit(msg.sender, msg.value);
    }

    /// @inheritdoc IWETH
    function withdraw(uint256 wad) public virtual {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        payable(msg.sender).transfer(wad);
        emit Withdrawal(msg.sender, wad);
    }

    /// @inheritdoc IWETH
    function totalSupply() external view returns (uint256) {
        return address(this).balance;
    }

    /// @inheritdoc IWETH
    function approve(address guy, uint256 wad) external returns (bool) {
        allowance[msg.sender][guy] = wad;
        emit Approval(msg.sender, guy, wad);
        return true;
    }

    /// @inheritdoc IWETH
    function transfer(address dst, uint256 wad) external returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    /// @inheritdoc IWETH
    function transferFrom(address src, address dst, uint256 wad) public returns (bool) {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != type(uint256).max) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        emit Transfer(src, dst, wad);

        return true;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import { ISemver } from "src/universal/ISemver.sol";
import { Storage } from "src/libraries/Storage.sol";

/// @custom:audit none This contracts is not yet audited.
/// @title SuperchainConfig
/// @notice The SuperchainConfig contract is used to manage configuration of global superchain values.
contract SuperchainConfig is Initializable, ISemver {
    /// @notice Enum representing different types of updates.
    /// @custom:value GUARDIAN            Represents an update to the guardian.
    enum UpdateType {
        GUARDIAN
    }

    /// @notice Whether or not the Superchain is paused.
    bytes32 public constant PAUSED_SLOT = bytes32(uint256(keccak256("superchainConfig.paused")) - 1);

    /// @notice The address of the guardian, which can pause withdrawals from the System.
    ///         It can only be modified by an upgrade.
    bytes32 public constant GUARDIAN_SLOT = bytes32(uint256(keccak256("superchainConfig.guardian")) - 1);

    /// @notice Emitted when the pause is triggered.
    /// @param identifier A string helping to identify provenance of the pause transaction.
    event Paused(string identifier);

    /// @notice Emitted when the pause is lifted.
    event Unpaused();

    /// @notice Emitted when configuration is updated.
    /// @param updateType Type of update.
    /// @param data       Encoded update data.
    event ConfigUpdate(UpdateType indexed updateType, bytes data);

    /// @notice Semantic version.
    /// @custom:semver 1.1.0
    string public constant version = "1.1.0";

    /// @notice Constructs the SuperchainConfig contract.
    constructor() {
        initialize({ _guardian: address(0), _paused: false });
    }

    /// @notice Initializer.
    /// @param _guardian    Address of the guardian, can pause the OptimismPortal.
    /// @param _paused      Initial paused status.
    function initialize(address _guardian, bool _paused) public initializer {
        _setGuardian(_guardian);
        if (_paused) {
            _pause("Initializer paused");
        }
    }

    /// @notice Getter for the guardian address.
    function guardian() public view returns (address guardian_) {
        guardian_ = Storage.getAddress(GUARDIAN_SLOT);
    }

    /// @notice Getter for the current paused status.
    function paused() public view returns (bool paused_) {
        paused_ = Storage.getBool(PAUSED_SLOT);
    }

    /// @notice Pauses withdrawals.
    /// @param _identifier (Optional) A string to identify provenance of the pause transaction.
    function pause(string memory _identifier) external {
        require(msg.sender == guardian(), "SuperchainConfig: only guardian can pause");
        _pause(_identifier);
    }

    /// @notice Pauses withdrawals.
    /// @param _identifier (Optional) A string to identify provenance of the pause transaction.
    function _pause(string memory _identifier) internal {
        Storage.setBool(PAUSED_SLOT, true);
        emit Paused(_identifier);
    }

    /// @notice Unpauses withdrawals.
    function unpause() external {
        require(msg.sender == guardian(), "SuperchainConfig: only guardian can unpause");
        Storage.setBool(PAUSED_SLOT, false);
        emit Unpaused();
    }

    /// @notice Sets the guardian address. This is only callable during initialization, so an upgrade
    ///         will be required to change the guardian.
    /// @param _guardian The new guardian address.
    function _setGuardian(address _guardian) internal {
        Storage.setAddress(GUARDIAN_SLOT, _guardian);
        emit ConfigUpdate(UpdateType.GUARDIAN, abi.encode(_guardian));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/Address.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @title Storage
/// @notice Storage handles reading and writing to arbitary storage locations
library Storage {
    /// @notice Returns an address stored in an arbitrary storage slot.
    ///         These storage slots decouple the storage layout from
    ///         solc's automation.
    /// @param _slot The storage slot to retrieve the address from.
    function getAddress(bytes32 _slot) internal view returns (address addr_) {
        assembly {
            addr_ := sload(_slot)
        }
    }

    /// @notice Stores an address in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the address in.
    /// @param _address The protocol version to store
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting addresses
    ///      in arbitrary storage slots.
    function setAddress(bytes32 _slot, address _address) internal {
        assembly {
            sstore(_slot, _address)
        }
    }

    /// @notice Returns a uint256 stored in an arbitrary storage slot.
    ///         These storage slots decouple the storage layout from
    ///         solc's automation.
    /// @param _slot The storage slot to retrieve the address from.
    function getUint(bytes32 _slot) internal view returns (uint256 value_) {
        assembly {
            value_ := sload(_slot)
        }
    }

    /// @notice Stores a value in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the address in.
    /// @param _value The protocol version to store
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting values
    ///      in arbitrary storage slots.
    function setUint(bytes32 _slot, uint256 _value) internal {
        assembly {
            sstore(_slot, _value)
        }
    }

    /// @notice Returns a bytes32 stored in an arbitrary storage slot.
    ///         These storage slots decouple the storage layout from
    ///         solc's automation.
    /// @param _slot The storage slot to retrieve the address from.
    function getBytes32(bytes32 _slot) internal view returns (bytes32 value_) {
        assembly {
            value_ := sload(_slot)
        }
    }

    /// @notice Stores a bytes32 value in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the address in.
    /// @param _value The bytes32 value to store.
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting values
    ///      in arbitrary storage slots.
    function setBytes32(bytes32 _slot, bytes32 _value) internal {
        assembly {
            sstore(_slot, _value)
        }
    }

    /// @notice Stores a bool value in an arbitrary storage slot, `_slot`.
    /// @param _slot The storage slot to store the bool in.
    /// @param _value The bool value to store
    /// @dev WARNING! This function must be used cautiously, as it allows for overwriting values
    ///      in arbitrary storage slots.
    function setBool(bytes32 _slot, bool _value) internal {
        assembly {
            sstore(_slot, _value)
        }
    }

    /// @notice Returns a bool stored in an arbitrary storage slot.
    /// @param _slot The storage slot to retrieve the bool from.
    function getBool(bytes32 _slot) internal view returns (bool value_) {
        assembly {
            value_ := sload(_slot)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

{
  "remappings": [
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@openzeppelin/contracts-v5/=lib/openzeppelin-contracts-v5/contracts/",
    "@rari-capital/solmate/=lib/solmate/",
    "@lib-keccak/=lib/lib-keccak/contracts/lib/",
    "@solady/=lib/solady/src/",
    "forge-std/=lib/forge-std/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "safe-contracts/=lib/safe-contracts/contracts/",
    "kontrol-cheatcodes/=lib/kontrol-cheatcodes/src/",
    "gelato/=lib/automate/contracts/",
    "@solady-test/=lib/lib-keccak/lib/solady/test/",
    "automate/=lib/automate/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts-v5/lib/erc4626-tests/",
    "hardhat/=lib/automate/node_modules/hardhat/",
    "lib-keccak/=lib/lib-keccak/contracts/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts-v5/=lib/openzeppelin-contracts-v5/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "prb-test/=lib/automate/lib/prb-test/src/",
    "prb/-est/=lib/automate/lib/prb-test/src/",
    "solady/=lib/solady/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "none"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"uint256","name":"_delay","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":true,"internalType":"address","name":"guy","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"dst","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":true,"internalType":"address","name":"dst","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Unwrap","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"src","type":"address"},{"indexed":false,"internalType":"uint256","name":"wad","type":"uint256"}],"name":"Withdrawal","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"guy","type":"address"},{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"config","outputs":[{"internalType":"contract SuperchainConfig","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"delay","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"deposit","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_guy","type":"address"},{"internalType":"uint256","name":"_wad","type":"uint256"}],"name":"hold","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"contract SuperchainConfig","name":"_config","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_wad","type":"uint256"}],"name":"recover","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"dst","type":"address"},{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"src","type":"address"},{"internalType":"address","name":"dst","type":"address"},{"internalType":"uint256","name":"wad","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_guy","type":"address"},{"internalType":"uint256","name":"_wad","type":"uint256"}],"name":"unlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_wad","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_guy","type":"address"},{"internalType":"uint256","name":"_wad","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"withdrawals","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"timestamp","type":"uint256"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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