Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";
import { ReentrancyGuard } from "../Helpers/ReentrancyGuard.sol";
import { SwapperV2, LibSwap } from "../Helpers/SwapperV2.sol";
import { Validatable } from "../Helpers/Validatable.sol";
import { LibUtil } from "../Libraries/LibUtil.sol";
import { ContractCallNotAllowed, CumulativeSlippageTooHigh, NativeAssetTransferFailed } from "../Errors/GenericErrors.sol";
import { ERC20, SafeTransferLib } from "solmate/utils/SafeTransferLib.sol";
import { LibAllowList } from "../Libraries/LibAllowList.sol";

/// @title GenericSwapFacet
/// @author LI.FI (https://li.fi)
/// @notice Provides functionality for swapping through any APPROVED DEX
/// @dev Can only execute calldata for APPROVED function selectors
/// @custom:version 2.0.0
contract GenericSwapFacet is ILiFi, ReentrancyGuard, SwapperV2, Validatable {
    // using SafeERC20 for ERC20;
    using SafeTransferLib for ERC20;

    /// External Methods ///

    /// @notice Performs a single swap from an ERC20 token to another ERC20 token
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensSingleERC20ToERC20(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData calldata _swapData
    ) external payable {
        _depositAndSwapERC20(_swapData);

        address receivingAssetId = _swapData.receivingAssetId;
        address sendingAssetId = _swapData.sendingAssetId;

        // get contract's balance (which will be sent in full to user)
        uint256 amountReceived = ERC20(receivingAssetId).balanceOf(
            address(this)
        );

        // ensure that minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        ERC20(receivingAssetId).safeTransfer(_receiver, amountReceived);

        // emit events (both required for tracking)
        uint256 fromAmount = _swapData.fromAmount;
        emit LibSwap.AssetSwapped(
            _transactionId,
            _swapData.callTo,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived,
            block.timestamp
        );

        emit LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived
        );
    }

    /// @notice Performs a single swap from an ERC20 token to the network's native token
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensSingleERC20ToNative(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData calldata _swapData
    ) external payable {
        _depositAndSwapERC20(_swapData);

        // get contract's balance (which will be sent in full to user)
        uint256 amountReceived = address(this).balance;

        // ensure that minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = _receiver.call{ value: amountReceived }("");
        if (!success) revert NativeAssetTransferFailed();

        // emit events (both required for tracking)
        address receivingAssetId = _swapData.receivingAssetId;
        address sendingAssetId = _swapData.sendingAssetId;
        uint256 fromAmount = _swapData.fromAmount;
        emit LibSwap.AssetSwapped(
            _transactionId,
            _swapData.callTo,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived,
            block.timestamp
        );

        emit LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived
        );
    }

    /// @notice Performs a single swap from the network's native token to ERC20 token
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensSingleNativeToERC20(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData calldata _swapData
    ) external payable {
        address callTo = _swapData.callTo;
        // ensure that contract (callTo) and function selector are whitelisted
        if (
            !(LibAllowList.contractIsAllowed(callTo) &&
                LibAllowList.selectorIsAllowed(bytes4(_swapData.callData[:4])))
        ) revert ContractCallNotAllowed();

        // execute swap
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = callTo.call{ value: msg.value }(
            _swapData.callData
        );
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }

        // get contract's balance (which will be sent in full to user)
        address receivingAssetId = _swapData.receivingAssetId;
        uint256 amountReceived = ERC20(receivingAssetId).balanceOf(
            address(this)
        );

        // ensure that minAmountOut was received
        if (amountReceived < _minAmountOut)
            revert CumulativeSlippageTooHigh(_minAmountOut, amountReceived);

        // transfer funds to receiver
        ERC20(receivingAssetId).safeTransfer(_receiver, amountReceived);

        // emit events (both required for tracking)
        address sendingAssetId = _swapData.sendingAssetId;
        uint256 fromAmount = _swapData.fromAmount;
        emit LibSwap.AssetSwapped(
            _transactionId,
            callTo,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived,
            block.timestamp
        );

        emit LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            sendingAssetId,
            receivingAssetId,
            fromAmount,
            amountReceived
        );
    }

    /// @notice Performs multiple swaps (of any kind) in one transaction
    /// @param _transactionId the transaction id associated with the operation
    /// @param _integrator the name of the integrator
    /// @param _referrer the address of the referrer
    /// @param _receiver the address to receive the swapped tokens into (also excess tokens)
    /// @param _minAmountOut the minimum amount of the final asset to receive
    /// @param _swapData an object containing swap related data to perform swaps before bridging
    function swapTokensGeneric(
        bytes32 _transactionId,
        string calldata _integrator,
        string calldata _referrer,
        address payable _receiver,
        uint256 _minAmountOut,
        LibSwap.SwapData[] calldata _swapData
    ) external payable nonReentrant refundExcessNative(_receiver) {
        uint256 postSwapBalance = _depositAndSwap(
            _transactionId,
            _minAmountOut,
            _swapData,
            _receiver
        );
        address receivingAssetId = _swapData[_swapData.length - 1]
            .receivingAssetId;
        LibAsset.transferAsset(receivingAssetId, _receiver, postSwapBalance);

        emit LiFiGenericSwapCompleted(
            _transactionId,
            _integrator,
            _referrer,
            _receiver,
            _swapData[0].sendingAssetId,
            receivingAssetId,
            _swapData[0].fromAmount,
            postSwapBalance
        );
    }

    /// Internal helper methods ///

    function _depositAndSwapERC20(
        LibSwap.SwapData calldata _swapData
    ) private {
        ERC20 sendingAsset = ERC20(_swapData.sendingAssetId);
        uint256 fromAmount = _swapData.fromAmount;
        // deposit funds
        sendingAsset.safeTransferFrom(msg.sender, address(this), fromAmount);

        // ensure that contract (callTo) and function selector are whitelisted
        address callTo = _swapData.callTo;
        address approveTo = _swapData.approveTo;
        if (
            !(LibAllowList.contractIsAllowed(callTo) &&
                LibAllowList.selectorIsAllowed(bytes4(_swapData.callData[:4])))
        ) revert ContractCallNotAllowed();

        // ensure that approveTo address is also whitelisted if it differs from callTo
        if (approveTo != callTo && !LibAllowList.contractIsAllowed(approveTo))
            revert ContractCallNotAllowed();

        // check if the current allowance is sufficient
        uint256 currentAllowance = sendingAsset.allowance(
            address(this),
            approveTo
        );

        // check if existing allowance is sufficient
        if (currentAllowance < fromAmount) {
            // check if is non-zero, set to 0 if not
            if (currentAllowance != 0) sendingAsset.safeApprove(approveTo, 0);
            // set allowance to uint max to avoid future approvals
            sendingAsset.safeApprove(approveTo, type(uint256).max);
        }

        // execute swap
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = callTo.call(_swapData.callData);
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

interface ILiFi {
    /// Structs ///

    struct BridgeData {
        bytes32 transactionId;
        string bridge;
        string integrator;
        address referrer;
        address sendingAssetId;
        address receiver;
        uint256 minAmount;
        uint256 destinationChainId;
        bool hasSourceSwaps;
        bool hasDestinationCall;
    }

    /// Events ///

    event LiFiTransferStarted(ILiFi.BridgeData bridgeData);

    event LiFiTransferCompleted(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );

    event LiFiTransferRecovered(
        bytes32 indexed transactionId,
        address receivingAssetId,
        address receiver,
        uint256 amount,
        uint256 timestamp
    );

    event LiFiGenericSwapCompleted(
        bytes32 indexed transactionId,
        string integrator,
        string referrer,
        address receiver,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount
    );

    // Deprecated but kept here to include in ABI to parse historic events
    event LiFiSwappedGeneric(
        bytes32 indexed transactionId,
        string integrator,
        string referrer,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount
    );
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import { InsufficientBalance, NullAddrIsNotAnERC20Token, NullAddrIsNotAValidSpender, NoTransferToNullAddress, InvalidAmount, NativeAssetTransferFailed } from "../Errors/GenericErrors.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { LibSwap } from "./LibSwap.sol";

/// @title LibAsset
/// @notice This library contains helpers for dealing with onchain transfers
///         of assets, including accounting for the native asset `assetId`
///         conventions and any noncompliant ERC20 transfers
library LibAsset {
    uint256 private constant MAX_UINT = type(uint256).max;

    address internal constant NULL_ADDRESS = address(0);

    /// @dev All native assets use the empty address for their asset id
    ///      by convention

    address internal constant NATIVE_ASSETID = NULL_ADDRESS; //address(0)

    /// @notice Gets the balance of the inheriting contract for the given asset
    /// @param assetId The asset identifier to get the balance of
    /// @return Balance held by contracts using this library
    function getOwnBalance(address assetId) internal view returns (uint256) {
        return
            isNativeAsset(assetId)
                ? address(this).balance
                : IERC20(assetId).balanceOf(address(this));
    }

    /// @notice Transfers ether from the inheriting contract to a given
    ///         recipient
    /// @param recipient Address to send ether to
    /// @param amount Amount to send to given recipient
    function transferNativeAsset(
        address payable recipient,
        uint256 amount
    ) private {
        if (recipient == NULL_ADDRESS) revert NoTransferToNullAddress();
        if (amount > address(this).balance)
            revert InsufficientBalance(amount, address(this).balance);
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, ) = recipient.call{ value: amount }("");
        if (!success) revert NativeAssetTransferFailed();
    }

    /// @notice If the current allowance is insufficient, the allowance for a given spender
    /// is set to MAX_UINT.
    /// @param assetId Token address to transfer
    /// @param spender Address to give spend approval to
    /// @param amount Amount to approve for spending
    function maxApproveERC20(
        IERC20 assetId,
        address spender,
        uint256 amount
    ) internal {
        if (isNativeAsset(address(assetId))) {
            return;
        }
        if (spender == NULL_ADDRESS) {
            revert NullAddrIsNotAValidSpender();
        }

        if (assetId.allowance(address(this), spender) < amount) {
            SafeERC20.safeApprove(IERC20(assetId), spender, 0);
            SafeERC20.safeApprove(IERC20(assetId), spender, MAX_UINT);
        }
    }

    /// @notice Transfers tokens from the inheriting contract to a given
    ///         recipient
    /// @param assetId Token address to transfer
    /// @param recipient Address to send token to
    /// @param amount Amount to send to given recipient
    function transferERC20(
        address assetId,
        address recipient,
        uint256 amount
    ) private {
        if (isNativeAsset(assetId)) {
            revert NullAddrIsNotAnERC20Token();
        }
        if (recipient == NULL_ADDRESS) {
            revert NoTransferToNullAddress();
        }

        uint256 assetBalance = IERC20(assetId).balanceOf(address(this));
        if (amount > assetBalance) {
            revert InsufficientBalance(amount, assetBalance);
        }
        SafeERC20.safeTransfer(IERC20(assetId), recipient, amount);
    }

    /// @notice Transfers tokens from a sender to a given recipient
    /// @param assetId Token address to transfer
    /// @param from Address of sender/owner
    /// @param to Address of recipient/spender
    /// @param amount Amount to transfer from owner to spender
    function transferFromERC20(
        address assetId,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (isNativeAsset(assetId)) {
            revert NullAddrIsNotAnERC20Token();
        }
        if (to == NULL_ADDRESS) {
            revert NoTransferToNullAddress();
        }

        IERC20 asset = IERC20(assetId);
        uint256 prevBalance = asset.balanceOf(to);
        SafeERC20.safeTransferFrom(asset, from, to, amount);
        if (asset.balanceOf(to) - prevBalance != amount) {
            revert InvalidAmount();
        }
    }

    function depositAsset(address assetId, uint256 amount) internal {
        if (amount == 0) revert InvalidAmount();
        if (isNativeAsset(assetId)) {
            if (msg.value < amount) revert InvalidAmount();
        } else {
            uint256 balance = IERC20(assetId).balanceOf(msg.sender);
            if (balance < amount) revert InsufficientBalance(amount, balance);
            transferFromERC20(assetId, msg.sender, address(this), amount);
        }
    }

    function depositAssets(LibSwap.SwapData[] calldata swaps) internal {
        for (uint256 i = 0; i < swaps.length; ) {
            LibSwap.SwapData calldata swap = swaps[i];
            if (swap.requiresDeposit) {
                depositAsset(swap.sendingAssetId, swap.fromAmount);
            }
            unchecked {
                i++;
            }
        }
    }

    /// @notice Determines whether the given assetId is the native asset
    /// @param assetId The asset identifier to evaluate
    /// @return Boolean indicating if the asset is the native asset
    function isNativeAsset(address assetId) internal pure returns (bool) {
        return assetId == NATIVE_ASSETID;
    }

    /// @notice Wrapper function to transfer a given asset (native or erc20) to
    ///         some recipient. Should handle all non-compliant return value
    ///         tokens as well by using the SafeERC20 contract by open zeppelin.
    /// @param assetId Asset id for transfer (address(0) for native asset,
    ///                token address for erc20s)
    /// @param recipient Address to send asset to
    /// @param amount Amount to send to given recipient
    function transferAsset(
        address assetId,
        address payable recipient,
        uint256 amount
    ) internal {
        isNativeAsset(assetId)
            ? transferNativeAsset(recipient, amount)
            : transferERC20(assetId, recipient, amount);
    }

    /// @dev Checks whether the given address is a contract and contains code
    function isContract(address _contractAddr) internal view returns (bool) {
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(_contractAddr)
        }
        return size > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

import { LibAsset } from "./LibAsset.sol";
import { LibUtil } from "./LibUtil.sol";
import { InvalidContract, NoSwapFromZeroBalance, InsufficientBalance } from "../Errors/GenericErrors.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

library LibSwap {
    struct SwapData {
        address callTo;
        address approveTo;
        address sendingAssetId;
        address receivingAssetId;
        uint256 fromAmount;
        bytes callData;
        bool requiresDeposit;
    }

    event AssetSwapped(
        bytes32 transactionId,
        address dex,
        address fromAssetId,
        address toAssetId,
        uint256 fromAmount,
        uint256 toAmount,
        uint256 timestamp
    );

    function swap(bytes32 transactionId, SwapData calldata _swap) internal {
        if (!LibAsset.isContract(_swap.callTo)) revert InvalidContract();
        uint256 fromAmount = _swap.fromAmount;
        if (fromAmount == 0) revert NoSwapFromZeroBalance();
        uint256 nativeValue = LibAsset.isNativeAsset(_swap.sendingAssetId)
            ? _swap.fromAmount
            : 0;
        uint256 initialSendingAssetBalance = LibAsset.getOwnBalance(
            _swap.sendingAssetId
        );
        uint256 initialReceivingAssetBalance = LibAsset.getOwnBalance(
            _swap.receivingAssetId
        );

        if (nativeValue == 0) {
            LibAsset.maxApproveERC20(
                IERC20(_swap.sendingAssetId),
                _swap.approveTo,
                _swap.fromAmount
            );
        }

        if (initialSendingAssetBalance < _swap.fromAmount) {
            revert InsufficientBalance(
                _swap.fromAmount,
                initialSendingAssetBalance
            );
        }

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory res) = _swap.callTo.call{
            value: nativeValue
        }(_swap.callData);
        if (!success) {
            string memory reason = LibUtil.getRevertMsg(res);
            revert(reason);
        }

        uint256 newBalance = LibAsset.getOwnBalance(_swap.receivingAssetId);

        emit AssetSwapped(
            transactionId,
            _swap.callTo,
            _swap.sendingAssetId,
            _swap.receivingAssetId,
            _swap.fromAmount,
            newBalance > initialReceivingAssetBalance
                ? newBalance - initialReceivingAssetBalance
                : newBalance,
            block.timestamp
        );
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;

/// @title Reentrancy Guard
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide protection against reentrancy
abstract contract ReentrancyGuard {
    /// Storage ///

    bytes32 private constant NAMESPACE = keccak256("com.lifi.reentrancyguard");

    /// Types ///

    struct ReentrancyStorage {
        uint256 status;
    }

    /// Errors ///

    error ReentrancyError();

    /// Constants ///

    uint256 private constant _NOT_ENTERED = 0;
    uint256 private constant _ENTERED = 1;

    /// Modifiers ///

    modifier nonReentrant() {
        ReentrancyStorage storage s = reentrancyStorage();
        if (s.status == _ENTERED) revert ReentrancyError();
        s.status = _ENTERED;
        _;
        s.status = _NOT_ENTERED;
    }

    /// Private Methods ///

    /// @dev fetch local storage
    function reentrancyStorage()
        private
        pure
        returns (ReentrancyStorage storage data)
    {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            data.slot := position
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";
import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibAllowList } from "../Libraries/LibAllowList.sol";
import { ContractCallNotAllowed, NoSwapDataProvided, CumulativeSlippageTooHigh } from "../Errors/GenericErrors.sol";

/// @title Swapper
/// @author LI.FI (https://li.fi)
/// @notice Abstract contract to provide swap functionality
contract SwapperV2 is ILiFi {
    /// Types ///

    /// @dev only used to get around "Stack Too Deep" errors
    struct ReserveData {
        bytes32 transactionId;
        address payable leftoverReceiver;
        uint256 nativeReserve;
    }

    /// Modifiers ///

    /// @dev Sends any leftover balances back to the user
    /// @notice Sends any leftover balances to the user
    /// @param _swaps Swap data array
    /// @param _leftoverReceiver Address to send leftover tokens to
    /// @param _initialBalances Array of initial token balances
    modifier noLeftovers(
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256[] memory _initialBalances
    ) {
        uint256 numSwaps = _swaps.length;
        if (numSwaps != 1) {
            address finalAsset = _swaps[numSwaps - 1].receivingAssetId;
            uint256 curBalance;

            _;

            for (uint256 i = 0; i < numSwaps - 1; ) {
                address curAsset = _swaps[i].receivingAssetId;
                // Handle multi-to-one swaps
                if (curAsset != finalAsset) {
                    curBalance =
                        LibAsset.getOwnBalance(curAsset) -
                        _initialBalances[i];
                    if (curBalance > 0) {
                        LibAsset.transferAsset(
                            curAsset,
                            _leftoverReceiver,
                            curBalance
                        );
                    }
                }
                unchecked {
                    ++i;
                }
            }
        } else {
            _;
        }
    }

    /// @dev Sends any leftover balances back to the user reserving native tokens
    /// @notice Sends any leftover balances to the user
    /// @param _swaps Swap data array
    /// @param _leftoverReceiver Address to send leftover tokens to
    /// @param _initialBalances Array of initial token balances
    modifier noLeftoversReserve(
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256[] memory _initialBalances,
        uint256 _nativeReserve
    ) {
        uint256 numSwaps = _swaps.length;
        if (numSwaps != 1) {
            address finalAsset = _swaps[numSwaps - 1].receivingAssetId;
            uint256 curBalance;

            _;

            for (uint256 i = 0; i < numSwaps - 1; ) {
                address curAsset = _swaps[i].receivingAssetId;
                // Handle multi-to-one swaps
                if (curAsset != finalAsset) {
                    curBalance =
                        LibAsset.getOwnBalance(curAsset) -
                        _initialBalances[i];
                    uint256 reserve = LibAsset.isNativeAsset(curAsset)
                        ? _nativeReserve
                        : 0;
                    if (curBalance > 0) {
                        LibAsset.transferAsset(
                            curAsset,
                            _leftoverReceiver,
                            curBalance - reserve
                        );
                    }
                }
                unchecked {
                    ++i;
                }
            }
        } else {
            _;
        }
    }

    /// @dev Refunds any excess native asset sent to the contract after the main function
    /// @notice Refunds any excess native asset sent to the contract after the main function
    /// @param _refundReceiver Address to send refunds to
    modifier refundExcessNative(address payable _refundReceiver) {
        uint256 initialBalance = address(this).balance - msg.value;
        _;
        uint256 finalBalance = address(this).balance;

        if (finalBalance > initialBalance) {
            LibAsset.transferAsset(
                LibAsset.NATIVE_ASSETID,
                _refundReceiver,
                finalBalance - initialBalance
            );
        }
    }

    /// Internal Methods ///

    /// @dev Deposits value, executes swaps, and performs minimum amount check
    /// @param _transactionId the transaction id associated with the operation
    /// @param _minAmount the minimum amount of the final asset to receive
    /// @param _swaps Array of data used to execute swaps
    /// @param _leftoverReceiver The address to send leftover funds to
    /// @return uint256 result of the swap
    function _depositAndSwap(
        bytes32 _transactionId,
        uint256 _minAmount,
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver
    ) internal returns (uint256) {
        uint256 numSwaps = _swaps.length;

        if (numSwaps == 0) {
            revert NoSwapDataProvided();
        }

        address finalTokenId = _swaps[numSwaps - 1].receivingAssetId;
        uint256 initialBalance = LibAsset.getOwnBalance(finalTokenId);

        if (LibAsset.isNativeAsset(finalTokenId)) {
            initialBalance -= msg.value;
        }

        uint256[] memory initialBalances = _fetchBalances(_swaps);

        LibAsset.depositAssets(_swaps);
        _executeSwaps(
            _transactionId,
            _swaps,
            _leftoverReceiver,
            initialBalances
        );

        uint256 newBalance = LibAsset.getOwnBalance(finalTokenId) -
            initialBalance;

        if (newBalance < _minAmount) {
            revert CumulativeSlippageTooHigh(_minAmount, newBalance);
        }

        return newBalance;
    }

    /// @dev Deposits value, executes swaps, and performs minimum amount check and reserves native token for fees
    /// @param _transactionId the transaction id associated with the operation
    /// @param _minAmount the minimum amount of the final asset to receive
    /// @param _swaps Array of data used to execute swaps
    /// @param _leftoverReceiver The address to send leftover funds to
    /// @param _nativeReserve Amount of native token to prevent from being swept back to the caller
    function _depositAndSwap(
        bytes32 _transactionId,
        uint256 _minAmount,
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256 _nativeReserve
    ) internal returns (uint256) {
        uint256 numSwaps = _swaps.length;

        if (numSwaps == 0) {
            revert NoSwapDataProvided();
        }

        address finalTokenId = _swaps[numSwaps - 1].receivingAssetId;
        uint256 initialBalance = LibAsset.getOwnBalance(finalTokenId);

        if (LibAsset.isNativeAsset(finalTokenId)) {
            initialBalance -= msg.value;
        }

        uint256[] memory initialBalances = _fetchBalances(_swaps);

        LibAsset.depositAssets(_swaps);
        ReserveData memory rd = ReserveData(
            _transactionId,
            _leftoverReceiver,
            _nativeReserve
        );
        _executeSwaps(rd, _swaps, initialBalances);

        uint256 newBalance = LibAsset.getOwnBalance(finalTokenId) -
            initialBalance;

        if (LibAsset.isNativeAsset(finalTokenId)) {
            newBalance -= _nativeReserve;
        }

        if (newBalance < _minAmount) {
            revert CumulativeSlippageTooHigh(_minAmount, newBalance);
        }

        return newBalance;
    }

    /// Private Methods ///

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _transactionId the transaction id associated with the operation
    /// @param _swaps Array of data used to execute swaps
    /// @param _leftoverReceiver Address to send leftover tokens to
    /// @param _initialBalances Array of initial balances
    function _executeSwaps(
        bytes32 _transactionId,
        LibSwap.SwapData[] calldata _swaps,
        address payable _leftoverReceiver,
        uint256[] memory _initialBalances
    ) internal noLeftovers(_swaps, _leftoverReceiver, _initialBalances) {
        uint256 numSwaps = _swaps.length;
        for (uint256 i = 0; i < numSwaps; ) {
            LibSwap.SwapData calldata currentSwap = _swaps[i];

            if (
                !((LibAsset.isNativeAsset(currentSwap.sendingAssetId) ||
                    LibAllowList.contractIsAllowed(currentSwap.approveTo)) &&
                    LibAllowList.contractIsAllowed(currentSwap.callTo) &&
                    LibAllowList.selectorIsAllowed(
                        bytes4(currentSwap.callData[:4])
                    ))
            ) revert ContractCallNotAllowed();

            LibSwap.swap(_transactionId, currentSwap);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Executes swaps and checks that DEXs used are in the allowList
    /// @param _reserveData Data passed used to reserve native tokens
    /// @param _swaps Array of data used to execute swaps
    function _executeSwaps(
        ReserveData memory _reserveData,
        LibSwap.SwapData[] calldata _swaps,
        uint256[] memory _initialBalances
    )
        internal
        noLeftoversReserve(
            _swaps,
            _reserveData.leftoverReceiver,
            _initialBalances,
            _reserveData.nativeReserve
        )
    {
        uint256 numSwaps = _swaps.length;
        for (uint256 i = 0; i < numSwaps; ) {
            LibSwap.SwapData calldata currentSwap = _swaps[i];

            if (
                !((LibAsset.isNativeAsset(currentSwap.sendingAssetId) ||
                    LibAllowList.contractIsAllowed(currentSwap.approveTo)) &&
                    LibAllowList.contractIsAllowed(currentSwap.callTo) &&
                    LibAllowList.selectorIsAllowed(
                        bytes4(currentSwap.callData[:4])
                    ))
            ) revert ContractCallNotAllowed();

            LibSwap.swap(_reserveData.transactionId, currentSwap);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Fetches balances of tokens to be swapped before swapping.
    /// @param _swaps Array of data used to execute swaps
    /// @return uint256[] Array of token balances.
    function _fetchBalances(
        LibSwap.SwapData[] calldata _swaps
    ) private view returns (uint256[] memory) {
        uint256 numSwaps = _swaps.length;
        uint256[] memory balances = new uint256[](numSwaps);
        address asset;
        for (uint256 i = 0; i < numSwaps; ) {
            asset = _swaps[i].receivingAssetId;
            balances[i] = LibAsset.getOwnBalance(asset);

            if (LibAsset.isNativeAsset(asset)) {
                balances[i] -= msg.value;
            }

            unchecked {
                ++i;
            }
        }

        return balances;
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;

import { LibAsset } from "../Libraries/LibAsset.sol";
import { LibUtil } from "../Libraries/LibUtil.sol";
import { InvalidReceiver, InformationMismatch, InvalidSendingToken, InvalidAmount, NativeAssetNotSupported, InvalidDestinationChain, CannotBridgeToSameNetwork } from "../Errors/GenericErrors.sol";
import { ILiFi } from "../Interfaces/ILiFi.sol";
import { LibSwap } from "../Libraries/LibSwap.sol";

contract Validatable {
    modifier validateBridgeData(ILiFi.BridgeData memory _bridgeData) {
        if (LibUtil.isZeroAddress(_bridgeData.receiver)) {
            revert InvalidReceiver();
        }
        if (_bridgeData.minAmount == 0) {
            revert InvalidAmount();
        }
        if (_bridgeData.destinationChainId == block.chainid) {
            revert CannotBridgeToSameNetwork();
        }
        _;
    }

    modifier noNativeAsset(ILiFi.BridgeData memory _bridgeData) {
        if (LibAsset.isNativeAsset(_bridgeData.sendingAssetId)) {
            revert NativeAssetNotSupported();
        }
        _;
    }

    modifier onlyAllowSourceToken(
        ILiFi.BridgeData memory _bridgeData,
        address _token
    ) {
        if (_bridgeData.sendingAssetId != _token) {
            revert InvalidSendingToken();
        }
        _;
    }

    modifier onlyAllowDestinationChain(
        ILiFi.BridgeData memory _bridgeData,
        uint256 _chainId
    ) {
        if (_bridgeData.destinationChainId != _chainId) {
            revert InvalidDestinationChain();
        }
        _;
    }

    modifier containsSourceSwaps(ILiFi.BridgeData memory _bridgeData) {
        if (!_bridgeData.hasSourceSwaps) {
            revert InformationMismatch();
        }
        _;
    }

    modifier doesNotContainSourceSwaps(ILiFi.BridgeData memory _bridgeData) {
        if (_bridgeData.hasSourceSwaps) {
            revert InformationMismatch();
        }
        _;
    }

    modifier doesNotContainDestinationCalls(
        ILiFi.BridgeData memory _bridgeData
    ) {
        if (_bridgeData.hasDestinationCall) {
            revert InformationMismatch();
        }
        _;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

import "./LibBytes.sol";

library LibUtil {
    using LibBytes for bytes;

    function getRevertMsg(
        bytes memory _res
    ) internal pure returns (string memory) {
        // If the _res length is less than 68, then the transaction failed silently (without a revert message)
        if (_res.length < 68) return "Transaction reverted silently";
        bytes memory revertData = _res.slice(4, _res.length - 4); // Remove the selector which is the first 4 bytes
        return abi.decode(revertData, (string)); // All that remains is the revert string
    }

    /// @notice Determines whether the given address is the zero address
    /// @param addr The address to verify
    /// @return Boolean indicating if the address is the zero address
    function isZeroAddress(address addr) internal pure returns (bool) {
        return addr == address(0);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

error AlreadyInitialized();
error CannotAuthoriseSelf();
error CannotBridgeToSameNetwork();
error ContractCallNotAllowed();
error CumulativeSlippageTooHigh(uint256 minAmount, uint256 receivedAmount);
error ExternalCallFailed();
error InformationMismatch();
error InsufficientBalance(uint256 required, uint256 balance);
error InvalidAmount();
error InvalidCallData();
error InvalidConfig();
error InvalidContract();
error InvalidDestinationChain();
error InvalidFallbackAddress();
error InvalidReceiver();
error InvalidSendingToken();
error NativeAssetNotSupported();
error NativeAssetTransferFailed();
error NoSwapDataProvided();
error NoSwapFromZeroBalance();
error NotAContract();
error NotInitialized();
error NoTransferToNullAddress();
error NullAddrIsNotAnERC20Token();
error NullAddrIsNotAValidSpender();
error OnlyContractOwner();
error RecoveryAddressCannotBeZero();
error ReentrancyError();
error TokenNotSupported();
error UnAuthorized();
error UnsupportedChainId(uint256 chainId);
error WithdrawFailed();
error ZeroAmount();

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "../tokens/ERC20.sol";

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
    /*//////////////////////////////////////////////////////////////
                             ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*//////////////////////////////////////////////////////////////
                            ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
            mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

import { InvalidContract } from "../Errors/GenericErrors.sol";

/// @title Lib Allow List
/// @author LI.FI (https://li.fi)
/// @notice Library for managing and accessing the conract address allow list
library LibAllowList {
    /// Storage ///
    bytes32 internal constant NAMESPACE =
        keccak256("com.lifi.library.allow.list");

    struct AllowListStorage {
        mapping(address => bool) allowlist;
        mapping(bytes4 => bool) selectorAllowList;
        address[] contracts;
    }

    /// @dev Adds a contract address to the allow list
    /// @param _contract the contract address to add
    function addAllowedContract(address _contract) internal {
        _checkAddress(_contract);

        AllowListStorage storage als = _getStorage();

        if (als.allowlist[_contract]) return;

        als.allowlist[_contract] = true;
        als.contracts.push(_contract);
    }

    /// @dev Checks whether a contract address has been added to the allow list
    /// @param _contract the contract address to check
    function contractIsAllowed(
        address _contract
    ) internal view returns (bool) {
        return _getStorage().allowlist[_contract];
    }

    /// @dev Remove a contract address from the allow list
    /// @param _contract the contract address to remove
    function removeAllowedContract(address _contract) internal {
        AllowListStorage storage als = _getStorage();

        if (!als.allowlist[_contract]) {
            return;
        }

        als.allowlist[_contract] = false;

        uint256 length = als.contracts.length;
        // Find the contract in the list
        for (uint256 i = 0; i < length; i++) {
            if (als.contracts[i] == _contract) {
                // Move the last element into the place to delete
                als.contracts[i] = als.contracts[length - 1];
                // Remove the last element
                als.contracts.pop();
                break;
            }
        }
    }

    /// @dev Fetch contract addresses from the allow list
    function getAllowedContracts() internal view returns (address[] memory) {
        return _getStorage().contracts;
    }

    /// @dev Add a selector to the allow list
    /// @param _selector the selector to add
    function addAllowedSelector(bytes4 _selector) internal {
        _getStorage().selectorAllowList[_selector] = true;
    }

    /// @dev Removes a selector from the allow list
    /// @param _selector the selector to remove
    function removeAllowedSelector(bytes4 _selector) internal {
        _getStorage().selectorAllowList[_selector] = false;
    }

    /// @dev Returns if selector has been added to the allow list
    /// @param _selector the selector to check
    function selectorIsAllowed(bytes4 _selector) internal view returns (bool) {
        return _getStorage().selectorAllowList[_selector];
    }

    /// @dev Fetch local storage struct
    function _getStorage()
        internal
        pure
        returns (AllowListStorage storage als)
    {
        bytes32 position = NAMESPACE;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            als.slot := position
        }
    }

    /// @dev Contains business logic for validating a contract address.
    /// @param _contract address of the dex to check
    function _checkAddress(address _contract) private view {
        if (_contract == address(0)) revert InvalidContract();

        if (_contract.code.length == 0) revert InvalidContract();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;

library LibBytes {
    // solhint-disable no-inline-assembly

    // LibBytes specific errors
    error SliceOverflow();
    error SliceOutOfBounds();
    error AddressOutOfBounds();

    bytes16 private constant _SYMBOLS = "0123456789abcdef";

    // -------------------------

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    ) internal pure returns (bytes memory) {
        if (_length + 31 < _length) revert SliceOverflow();
        if (_bytes.length < _start + _length) revert SliceOutOfBounds();

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(
                    add(tempBytes, lengthmod),
                    mul(0x20, iszero(lengthmod))
                )
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(
                        add(
                            add(_bytes, lengthmod),
                            mul(0x20, iszero(lengthmod))
                        ),
                        _start
                    )
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(
        bytes memory _bytes,
        uint256 _start
    ) internal pure returns (address) {
        if (_bytes.length < _start + 20) {
            revert AddressOutOfBounds();
        }
        address tempAddress;

        assembly {
            tempAddress := div(
                mload(add(add(_bytes, 0x20), _start)),
                0x1000000000000000000000000
            )
        }

        return tempAddress;
    }

    /// Copied from OpenZeppelin's `Strings.sol` utility library.
    /// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/8335676b0e99944eef6a742e16dcd9ff6e68e609/contracts/utils/Strings.sol
    function toHexString(
        uint256 value,
        uint256 length
    ) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

{
  "remappings": [
    "@eth-optimism/=node_modules/@hop-protocol/sdk/node_modules/@eth-optimism/",
    "@uniswap/=node_modules/@uniswap/",
    "eth-gas-reporter/=node_modules/eth-gas-reporter/",
    "hardhat/=node_modules/hardhat/",
    "hardhat-deploy/=node_modules/hardhat-deploy/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "celer-network/=lib/sgn-v2-contracts/",
    "create3-factory/=lib/create3-factory/src/",
    "solmate/=lib/solmate/src/",
    "ds-test/=lib/ds-test/src/",
    "forge-std/=lib/forge-std/src/",
    "lifi/=src/",
    "test/=test/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts/contracts/",
    "sgn-v2-contracts/=lib/sgn-v2-contracts/contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"ContractCallNotAllowed","type":"error"},{"inputs":[{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"receivedAmount","type":"uint256"}],"name":"CumulativeSlippageTooHigh","type":"error"},{"inputs":[{"internalType":"uint256","name":"required","type":"uint256"},{"internalType":"uint256","name":"balance","type":"uint256"}],"name":"InsufficientBalance","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidContract","type":"error"},{"inputs":[],"name":"NativeAssetTransferFailed","type":"error"},{"inputs":[],"name":"NoSwapDataProvided","type":"error"},{"inputs":[],"name":"NoSwapFromZeroBalance","type":"error"},{"inputs":[],"name":"NoTransferToNullAddress","type":"error"},{"inputs":[],"name":"NullAddrIsNotAValidSpender","type":"error"},{"inputs":[],"name":"NullAddrIsNotAnERC20Token","type":"error"},{"inputs":[],"name":"ReentrancyError","type":"error"},{"inputs":[],"name":"SliceOutOfBounds","type":"error"},{"inputs":[],"name":"SliceOverflow","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"string","name":"integrator","type":"string"},{"indexed":false,"internalType":"string","name":"referrer","type":"string"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"address","name":"fromAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"toAssetId","type":"address"},{"indexed":false,"internalType":"uint256","name":"fromAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toAmount","type":"uint256"}],"name":"LiFiGenericSwapCompleted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"string","name":"integrator","type":"string"},{"indexed":false,"internalType":"string","name":"referrer","type":"string"},{"indexed":false,"internalType":"address","name":"fromAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"toAssetId","type":"address"},{"indexed":false,"internalType":"uint256","name":"fromAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toAmount","type":"uint256"}],"name":"LiFiSwappedGeneric","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"LiFiTransferCompleted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"indexed":false,"internalType":"address","name":"receivingAssetId","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"LiFiTransferRecovered","type":"event"},{"anonymous":false,"inputs":[{"components":[{"internalType":"bytes32","name":"transactionId","type":"bytes32"},{"internalType":"string","name":"bridge","type":"string"},{"internalType":"string","name":"integrator","type":"string"},{"internalType":"address","name":"referrer","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"bool","name":"hasSourceSwaps","type":"bool"},{"internalType":"bool","name":"hasDestinationCall","type":"bool"}],"indexed":false,"internalType":"struct ILiFi.BridgeData","name":"bridgeData","type":"tuple"}],"name":"LiFiTransferStarted","type":"event"},{"inputs":[{"internalType":"bytes32","name":"_transactionId","type":"bytes32"},{"internalType":"string","name":"_integrator","type":"string"},{"internalType":"string","name":"_referrer","type":"string"},{"internalType":"address payable","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_minAmountOut","type":"uint256"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"},{"internalType":"bool","name":"requiresDeposit","type":"bool"}],"internalType":"struct LibSwap.SwapData[]","name":"_swapData","type":"tuple[]"}],"name":"swapTokensGeneric","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_transactionId","type":"bytes32"},{"internalType":"string","name":"_integrator","type":"string"},{"internalType":"string","name":"_referrer","type":"string"},{"internalType":"address payable","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_minAmountOut","type":"uint256"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"},{"internalType":"bool","name":"requiresDeposit","type":"bool"}],"internalType":"struct LibSwap.SwapData","name":"_swapData","type":"tuple"}],"name":"swapTokensSingleERC20ToERC20","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_transactionId","type":"bytes32"},{"internalType":"string","name":"_integrator","type":"string"},{"internalType":"string","name":"_referrer","type":"string"},{"internalType":"address payable","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_minAmountOut","type":"uint256"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"},{"internalType":"bool","name":"requiresDeposit","type":"bool"}],"internalType":"struct LibSwap.SwapData","name":"_swapData","type":"tuple"}],"name":"swapTokensSingleERC20ToNative","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_transactionId","type":"bytes32"},{"internalType":"string","name":"_integrator","type":"string"},{"internalType":"string","name":"_referrer","type":"string"},{"internalType":"address payable","name":"_receiver","type":"address"},{"internalType":"uint256","name":"_minAmountOut","type":"uint256"},{"components":[{"internalType":"address","name":"callTo","type":"address"},{"internalType":"address","name":"approveTo","type":"address"},{"internalType":"address","name":"sendingAssetId","type":"address"},{"internalType":"address","name":"receivingAssetId","type":"address"},{"internalType":"uint256","name":"fromAmount","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"},{"internalType":"bool","name":"requiresDeposit","type":"bool"}],"internalType":"struct LibSwap.SwapData","name":"_swapData","type":"tuple"}],"name":"swapTokensSingleNativeToERC20","outputs":[],"stateMutability":"payable","type":"function"}]

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