Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

import { AccessControl } from "@openzeppelin/contracts/access/AccessControl.sol";
import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { ERC20Permit } from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { HourglassStableVaultBridgeManager } from "./base/HourglassStableVaultBridgeManager.sol";
import { HourglassStableVaultDepositCapManager } from "./base/HourglassStableVaultDepositCapManager.sol";
import { HourglassStableVaultDepositWindowManager } from "./base/HourglassStableVaultDepositWindowManager.sol";
import { HourglassStableVaultKYCManager } from "./base/HourglassStableVaultKYCManager.sol";
import { HourglassStableVaultTreasuryManager } from "./base/HourglassStableVaultTreasuryManager.sol";
import { IBridgeableVault } from "./interfaces/IBridgeableVault.sol";

enum OperationalMode {
    Deposit,
    Kyc,
    Yield,
    Withdraw,
    Recovery
}

/**
 * @title HourglassStableVaultKYC
 * @author Hourglass
 * @notice ERC20 pre-deposit vault with KYC for Stable. Accepts USDC deposits, deploys to treasury for yield generation
 * @dev This vault is a KYC-enabled vault that generates yield for KYC users only.
 *
 * Phase-by-phase logic:
 * 1. Deposit Phase:
 *    - Users receive shares at a 1:1 ratio
 *
 * 2. KYC Phase:
 *    - Admin can mark users as KYC approved during the KYC phase
 *    - Non-KYC users can recover their USDC at a 1:1 ratio
 *
 * 3. Yield Phase:
 *    - Treasury can withdraw KYC-approved USDC to treasury address
 *    - Non-KYC users can recover their USDC at a 1:1 ratio
 *
 * 4. Withdraw Phase:
 *    - KYC users can withdraw pro-rata USDT via the bridge contract
 *    - Non-KYC users can recover their USDC at a 1:1 ratio
 *
 * 5. Recovery Phase:
 *    - After RECOVERY_TIMESTAMP, anyone can transition to Recovery mode
 *    - Non-KYC users recover their USDC at a 1:1 ratio
 *    - KYC users recover their USDT at a pro-rata ratio plus any undeployed USDC pro-rata
 *
 * Accounting State:
 * - All deposited USDC is initially non-KYC
 * - When a user is marked KYC, their USDC moves from non-KYC pool to KYC pool
 * - Deployable assets are USDC in the KYC pool
 * - Non-KYC recoveries pull from the non-KYC USDC pool
 * - KYC recoveries pull from the USDT balance and undeployed USDC
 */
contract HourglassStableVaultKYC is
    IBridgeableVault,
    ERC20,
    ERC20Permit,
    AccessControl,
    ReentrancyGuard,
    HourglassStableVaultDepositWindowManager,
    HourglassStableVaultDepositCapManager,
    HourglassStableVaultBridgeManager,
    HourglassStableVaultKYCManager,
    HourglassStableVaultTreasuryManager
{
    using SafeERC20 for IERC20;
    using Math for uint256;

    // ------------------------------------------
    // State Variables
    // ------------------------------------------

    /// @notice USDC token contract address on Ethereum mainnet
    IERC20 public constant USDC = IERC20(0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48);

    /// @notice USDT token contract address on Ethereum mainnet
    IERC20 public constant USDT = IERC20(0xdAC17F958D2ee523a2206206994597C13D831ec7);

    /// @notice Number of decimals for the vault shares (matches USDC/USDT)
    uint8 private constant DECIMALS = 6;

    /// @notice Role identifier for admin operations
    bytes32 public constant ADMIN_ROLE = keccak256("ADMIN_ROLE");

    /// @notice Role identifier for treasury operations
    bytes32 public constant TREASURY_ROLE = keccak256("TREASURY_ROLE");

    /// @notice Maximum number of users that can be processed in a single batch operation
    uint256 public constant MAX_KYC_BATCH_SIZE = 100;

    /// @notice Timestamp after which the vault can enter Recovery mode permissionlessly
    /// @dev Set to 180 days from deployment
    uint256 public immutable RECOVERY_TIMESTAMP;

    /// @notice Current operational mode of the vault
    /// @dev Starts in Deposit mode and transitions through phases
    OperationalMode private _mode = OperationalMode.Deposit;

    // sharesKyc
    // sharesNonKyc

    /// @notice Total shares held by non-KYC users
    /// @dev Decreases when users are marked as KYC approved
    uint256 public sharesNonKyc;

    /// @notice Total shares held by KYC-approved users
    /// @dev Increases when users are marked as KYC approved
    uint256 public sharesKyc;

    /// @notice Total USDC assets available for deployment from KYC pool
    /// @dev Decreases when treasury withdraws for yield generation
    uint256 public usdcKycDeployable;

    // ------------------------------------------
    // Events
    // ------------------------------------------

    /**
     * @notice Emitted when the operational mode changes
     * @param previousMode The previous operational mode
     * @param newMode The new operational mode
     */
    event OperationalModeChanged(OperationalMode indexed previousMode, OperationalMode indexed newMode);

    /**
     * @notice Emitted when treasury withdraws funds
     * @param to Recipient address
     * @param amount Amount withdrawn
     */
    event TreasuryWithdrawal(address indexed to, uint256 indexed amount);

    /**
     * @notice Emitted when non-KYC user recovers their funds
     * @param user User address
     * @param usdcAmount Amount of USDC recovered
     * @param shares Amount of shares burned
     */
    event NonKYCRecovery(address indexed user, uint256 indexed usdcAmount, uint256 shares);

    /**
     * @notice Emitted when KYC user recovers both USDT and undeployed USDC in recovery mode
     * @param user User address
     * @param usdtAmount Amount of USDT recovered
     * @param usdcAmount Amount of undeployed USDC recovered
     * @param shares Amount of shares burned
     */
    event KYCRecovery(address indexed user, uint256 indexed usdtAmount, uint256 usdcAmount, uint256 shares);

    /**
     * @notice Emitted when KYC user recovers USDT in withdrawal mode
     * @param sender The address initiating the redeem
     * @param receiver The address receiving the USDT
     * @param owner The owner of the shares being redeemed
     * @param usdtAmount Amount of USDT recovered
     * @param shares Amount of shares burned
     */
    event KYCRedeem(
        address indexed sender, address indexed receiver, address indexed owner, uint256 usdtAmount, uint256 shares
    );

    /**
     * @notice Emitted when ERC20 tokens are recovered from the contract
     * @param token The token address
     * @param to The recipient address
     * @param amount The amount of tokens recovered
     */
    event RecoveredERC20(address indexed token, address indexed to, uint256 indexed amount);

    /**
     * @notice Emitted when a deposit occurs
     * @param sender The address initiating the deposit
     * @param owner The address that will own the shares
     * @param shares Amount of shares minted
     */
    event Deposit(address indexed sender, address indexed owner, uint256 shares);

    // ------------------------------------------
    // Errors
    // ------------------------------------------

    /// @notice Thrown when attempting an operation without sufficient balance
    error InsufficientBalance();

    /// @notice Thrown when attempting to recover forbidden token
    error RecoveryForbidden(address token);

    /// @notice Thrown when attempting to recover zero amount of tokens or ETH
    error RecoverZeroAmount();

    /// @notice Thrown when an amount parameter is zero but must be non-zero
    error ZeroAmount();

    /// @notice Thrown when an address parameter is zero but must be non-zero
    error ZeroAddress();

    /// @notice Thrown when vault is not in the expected operational mode
    error InvalidOperationalMode(OperationalMode currentMode, OperationalMode expectedMode);

    /// @notice Thrown when trying to transition to Recovery mode before the recovery timestamp
    error TransitionToRecoveryFailed();

    /// @notice Thrown when there are insufficient funds for deployment to treasury
    error InsufficientFundsForDeployment();

    /// @notice Thrown when attempting to transfer shares outside of allowed conditions
    error TransfersDisabled();

    /// @notice Thrown when user has no shares
    error NoSharesFound();

    /// @notice Thrown when batch array is empty
    error EmptyBatch();

    /// @notice Thrown when batch size exceeds maximum allowed
    error BatchTooLarge(uint256 provided, uint256 max);

    // ------------------------------------------
    // Modifiers
    // ------------------------------------------

    /**
     * @notice Ensures the vault is in the expected operational mode
     * @param expectedMode The operational mode that the vault must be in
     */
    modifier onlyMode(OperationalMode expectedMode) {
        if (_mode != expectedMode) revert InvalidOperationalMode(_mode, expectedMode);
        _;
    }

    /**
     * @notice Ensures the provided address is not zero address
     * @param addr The address to validate
     */
    modifier onlyNonZeroAddress(address addr) {
        if (addr == address(0)) revert ZeroAddress();
        _;
    }

    /**
     * @notice Ensures the provided amount is not zero
     * @param amount The amount to validate
     */
    modifier onlyNonZeroAmount(uint256 amount) {
        if (amount == 0) revert ZeroAmount();
        _;
    }

    // ------------------------------------------
    // Constructor & Receive
    // ------------------------------------------

    /**
     * @notice Vault constructor
     * @param _admin Address to receive all administrative roles
     * @param _name Name of the vault token
     * @param _symbol Symbol of the vault token
     * @param _depositCap The initial deposit cap for USDC deposits
     * @param _depositStart Unix timestamp when deposits open (inclusive)
     * @param _depositEnd Unix timestamp when deposits close (inclusive)
     * @param _treasuryAddress Address of the treasury for yield deployment
     * @dev Bridge contract for withdrawals set later to avoid circular dependency.
     *      Sets RECOVERY_TIMESTAMP to 180 days from deployment.
     *      Grants DEFAULT_ADMIN_ROLE, ADMIN_ROLE, and TREASURY_ROLE to _admin.
     */
    constructor(
        address _admin,
        string memory _name,
        string memory _symbol,
        uint256 _depositCap,
        uint64 _depositStart,
        uint64 _depositEnd,
        address _treasuryAddress
    )
        HourglassStableVaultDepositWindowManager(_depositStart, _depositEnd)
        HourglassStableVaultDepositCapManager(_depositCap)
        HourglassStableVaultTreasuryManager(_treasuryAddress)
        ERC20(_name, _symbol)
        ERC20Permit(_name)
        onlyNonZeroAddress(_admin)
    {
        _grantRole(DEFAULT_ADMIN_ROLE, _admin);
        _grantRole(ADMIN_ROLE, _admin);
        _grantRole(TREASURY_ROLE, _admin);

        RECOVERY_TIMESTAMP = block.timestamp + 180 days;
    }

    // ------------------------------------------
    // External Functions - Admin
    // ------------------------------------------

    /**
     * @notice Transitions the vault from Deposit to Kyc mode
     * @dev Only callable by admin role when in Deposit mode.
     *      After transition, no new deposits are accepted.
     */
    function transitionToKycMode() external onlyRole(ADMIN_ROLE) onlyMode(OperationalMode.Deposit) {
        _transitionToModeUnsafe(OperationalMode.Kyc);
    }

    /**
     * @notice Transitions the vault from KYC to Yield mode
     * @dev Called after KYC verification is complete.
     *      Only callable by admin role when in Kyc mode.
     *      After transition, treasury can withdraw KYC-approved funds.
     */
    function transitionToYieldMode() external onlyRole(ADMIN_ROLE) onlyMode(OperationalMode.Kyc) {
        _transitionToModeUnsafe(OperationalMode.Yield);
    }

    /**
     * @notice Transitions the vault from Yield to Withdraw mode
     * @dev Called after yield generation is complete and USDT has been returned.
     *      Only callable by admin role when in Yield mode.
     *      Treasury should have returned USDT before this transition.
     *      After transition, KYC users can withdraw via bridge.
     */
    function transitionToWithdrawMode() external onlyRole(ADMIN_ROLE) onlyMode(OperationalMode.Yield) {
        _transitionToModeUnsafe(OperationalMode.Withdraw);
    }

    /**
     * @notice Transitions the vault from any state to Recovery mode (a terminal state)
     * @dev Must be past the recovery timestamp. Can be called permissionlessly.
     *      Recovery mode is a terminal state that cannot be exited.
     *      Provides emergency exit for all users if admin is compromised.
     *      Non-KYC users recover USDC at 1:1, KYC users recover USDT + undeployed USDC.
     */
    function transitionToRecoveryMode() external {
        if (block.timestamp < RECOVERY_TIMESTAMP) revert TransitionToRecoveryFailed();
        _transitionToModeUnsafe(OperationalMode.Recovery);
    }

    /**
     * @notice Modifies a deposit window that is pending (has not yet started)
     * @param newStart Unix timestamp when deposits open
     * @param newEnd Unix timestamp when deposits close
     */
    function modifyPendingDepositWindow(
        uint64 newStart,
        uint64 newEnd
    )
        external
        onlyRole(ADMIN_ROLE)
        onlyMode(OperationalMode.Deposit)
    {
        _modifyPendingDepositWindow(newStart, newEnd);
    }

    /**
     * @notice Modifies the end timestamp of a deposit window that has already started
     * @param newEnd Unix timestamp when deposits close
     */
    function modifyStartedDepositWindow(uint64 newEnd)
        external
        onlyRole(ADMIN_ROLE)
        onlyMode(OperationalMode.Deposit)
    {
        _modifyStartedDepositWindow(newEnd);
    }

    /**
     * @notice Updates the deposit cap for the vault
     * @param newCap New maximum total USDT allowed (must be > 0 and >= current deposits)
     */
    function setDepositCap(uint256 newCap) external onlyRole(ADMIN_ROLE) onlyMode(OperationalMode.Deposit) {
        _setDepositCap(sharesNonKyc, newCap);
    }

    /**
     * @notice Sets the authorized bridge contract address and marks it as KYC-approved
     * @param newBridgeContract Address of the bridge contract that can call withdraw
     * @dev Also marks the bridge as KYC-approved to allow it to redeem shares
     */
    function setBridgeContract(address newBridgeContract) external onlyRole(ADMIN_ROLE) {
        _setBridgeContract(newBridgeContract);
        _setKycStatus(newBridgeContract, true);
    }

    /**
     * @notice Sets the treasury address where funds are sent
     * @param newTreasury Address of the new treasury
     */
    function setTreasuryAddress(address newTreasury) external onlyRole(ADMIN_ROLE) {
        _setTreasuryAddress(newTreasury);
    }

    /**
     * @notice Batch set KYC status for multiple users
     * @param users Array of addresses to update (max 100)
     * @param status KYC status to set
     * @dev Reverts if batch is empty or exceeds MAX_BATCH_SIZE
     */
    function batchSetKycStatus(
        address[] calldata users,
        bool status
    )
        external
        onlyRole(ADMIN_ROLE)
        onlyMode(OperationalMode.Kyc)
    {
        uint256 length = users.length;

        // Validate batch size
        if (length == 0) revert EmptyBatch();
        if (length > MAX_KYC_BATCH_SIZE) revert BatchTooLarge(length, MAX_KYC_BATCH_SIZE);

        for (uint256 i = 0; i < length;) {
            address user = users[i];
            if (user == address(0)) revert ZeroAddress();
            _setKycStatusWithAccounting(user, status);
            ++i;
        }
    }

    /**
     * @notice Recovers mistakenly sent ERC20 tokens from the contract
     * @param token Address of the ERC20 token to recover
     * @param to Recipient address for recovered tokens
     * @dev Only recovers excess tokens beyond what users can claim.
     *      Protects sharesNonKyc USDC for non-KYC users.
     *      Protects usdcKycDeployable USDC for KYC users.
     *      Protects all USDT as it belongs to KYC users.
     */
    function recoverErc20(
        address token,
        address to
    )
        external
        onlyRole(ADMIN_ROLE)
        onlyNonZeroAddress(token)
        onlyNonZeroAddress(to)
        nonReentrant
    {
        uint256 balance = IERC20(token).balanceOf(address(this));
        uint256 protected = 0;

        // Compute protected amounts for assets the contract holds
        if (token == address(USDC)) {
            // must protect sharesNonKyc so non-KYC users can recover their assets
            // must protect usdcKycDeployable since it belongs to the kyc users
            protected = sharesNonKyc + usdcKycDeployable;
        } else if (token == address(USDT)) {
            // all usdt belongs to the kyc users
            revert RecoveryForbidden(address(USDT));
        }

        uint256 recoverable = balance > protected ? balance - protected : 0;
        if (recoverable == 0) revert RecoverZeroAmount();

        IERC20(token).safeTransfer(to, recoverable);
        emit RecoveredERC20(token, to, recoverable);
    }

    // ---------------------
    // Treasury Functions
    // ---------------------

    /**
     * @notice Allows treasury to transfer USDC funds during Yield phase
     * @param amount Amount of USDC to transfer to treasury for yield generation
     * @dev Treasury can only access KYC pool funds, not non-KYC assets.
     *      Reduces usdcKycDeployable to track deployed funds.
     *      Ensures non-KYC user funds remain untouched and recoverable.
     */
    function transferToTreasury(uint256 amount)
        external
        nonReentrant
        onlyRole(TREASURY_ROLE)
        onlyMode(OperationalMode.Yield)
        onlyWhenTreasurySet
        onlyNonZeroAmount(amount)
    {
        if (amount > usdcKycDeployable) {
            revert InsufficientFundsForDeployment();
        }

        uint256 usdcBalance = USDC.balanceOf(address(this));
        if (amount > usdcBalance) {
            revert InsufficientFundsForDeployment();
        }

        usdcKycDeployable -= amount;
        USDC.safeTransfer(_treasuryAddress, amount);
        emit TreasuryWithdrawal(_treasuryAddress, amount);
    }

    // ------------------------------------------
    // Public Functions
    // ------------------------------------------

    /**
     * @notice Returns the current operational mode of the vault
     * @return The current operational mode of the vault
     */
    function operationalMode() public view returns (OperationalMode) {
        return _mode;
    }

    /**
     * @notice Returns the decimals of the vault shares
     * @return decimals The number of decimals (6, same as USDC and USDT)
     */
    function decimals() public pure override(ERC20) returns (uint8) {
        return DECIMALS;
    }

    /**
     * @notice Deposits USDC and mints shares for non-KYC users
     * @param assets Amount of USDC to deposit
     * @param receiver Address to receive the shares
     * @dev Follows ERC4626-style pattern: check → preview → execute.
     *      Shares are minted at 1:1 ratio to prevent inflation attacks.
     *      Deposits are subject to the configured deposit cap.
     */
    function deposit(
        uint256 assets,
        address receiver
    )
        public
        nonReentrant
        onlyMode(OperationalMode.Deposit)
        onlyWhenDepositWindowOpen
        onlyNonZeroAmount(assets)
    {
        // 1. Check against maximum
        if (assets > maxDeposit()) {
            revert DepositExceedsCap();
        }

        // 1. Transfer assets from depositor
        USDC.safeTransferFrom(msg.sender, address(this), assets);

        // 2. Update accounting
        sharesNonKyc += assets;

        // 3. Mint shares to receiver
        _mint(receiver, assets);

        // 4. Emit event
        emit Deposit(msg.sender, receiver, assets);
    }

    /**
     * @notice Allows non-KYC users to redeem shares for USDC at 1:1 ratio
     * @param shares Amount of shares to burn
     * @param receiver Address to receive the USDC
     * @param owner Owner of the shares being redeemed
     * @dev Available in any phase (including Deposit) - non-KYC funds are always protected.
     *      Non-KYC users maintain 1:1 redemption rate throughout all phases.
     *      This ensures principal preservation for users who don't complete KYC.
     */
    function redeemNonKyc(
        uint256 shares,
        address receiver,
        address owner
    )
        public
        nonReentrant
        onlyNonZeroAmount(shares)
        onlyNonKyc(owner)
    {
        // 1. Handle allowance if caller is not owner
        if (msg.sender != owner) {
            _spendAllowance(owner, msg.sender, shares);
        }

        // 2. Update accounting
        sharesNonKyc -= shares;

        // 3. Burn shares from owner
        _burn(owner, shares);

        // 4. Transfer USDC to receiver
        USDC.safeTransfer(receiver, shares);

        // 5. Emit events
        emit NonKYCRecovery(owner, shares, shares);
    }

    /**
     * @notice Allows KYC users to redeem shares for both USDT and undeployed USDC in Recovery mode
     * @param shares Amount of shares to redeem
     * @param receiver Address to receive the assets
     * @param owner Owner of the shares being redeemed
     * @dev Can only be called in Recovery mode by KYC approved users.
     *      Returns pro-rata share of both USDT and any undeployed USDC.
     *      Non-KYC users should use redeemNonKyc() which works in any phase.
     *      This function ensures KYC users can recover all assets in emergency scenarios,
     *      including both yield-bearing USDT and any USDC not yet deployed.
     */
    function redeemRecoveryKyc(
        uint256 shares,
        address receiver,
        address owner
    )
        external
        nonReentrant
        onlyMode(OperationalMode.Recovery)
        onlyNonZeroAmount(shares)
        onlyKycApproved(owner)
    {
        if (msg.sender != owner) {
            _spendAllowance(owner, msg.sender, shares);
        }

        // 2. Calculate both USDT and undeployed USDC amounts
        (uint256 usdtOut, uint256 usdcOut,) = previewRedeem(owner, shares);

        // 4. Update accounting
        sharesKyc -= shares;
        if (usdcOut > 0) {
            usdcKycDeployable -= usdcOut;
        }

        // 5. Burn shares
        _burn(owner, shares);

        // 6. Transfer both assets
        if (usdtOut > 0) {
            USDT.safeTransfer(receiver, usdtOut);
        }
        if (usdcOut > 0) {
            USDC.safeTransfer(receiver, usdcOut);
        }

        // 7. Emit event
        emit KYCRecovery(owner, usdtOut, usdcOut, shares);
    }

    // ------------------------------------------
    // Preview Functions (ERC4626-style)
    // ------------------------------------------

    function previewRedeem(
        address user,
        uint256 shares
    )
        public
        view
        returns (uint256 usdtOut, uint256 usdcOut, bool isKyc)
    {
        if (shares > balanceOf(user)) {
            revert InsufficientBalance();
        }
        isKyc = _isKycApproved(user);
        if (isKyc) {
            usdtOut = _convertToAssets(shares, sharesKyc, USDT.balanceOf(address(this)));
            usdcOut = _convertToAssets(shares, sharesKyc, usdcKycDeployable);
        } else {
            usdtOut = 0;
            usdcOut = shares;
        }
    }

    // ------------------------------------------
    // Max Functions (ERC4626-style)
    // ------------------------------------------

    /**
     * @notice Maximum amount of USDC that can be deposited
     * @return maxAssets Maximum USDC that can be deposited
     */
    function maxDeposit() public view returns (uint256 maxAssets) {
        if (_mode != OperationalMode.Deposit || !_depositWindowOpen()) return 0;
        return _getMaxDepositAgainstCap(sharesNonKyc);
    }

    // ------------------------------------------
    // Transfer Override Functions
    // ------------------------------------------
    // IBridgeableVault Implementation
    // ------------------------------------------

    /**
     * @notice Redeems vault shares for underlying assets for bridge operations
     * @param shares Amount of vault shares to redeem
     * @param receiver Address to receive the redeemed assets
     * @param owner Address that owns the shares being redeemed
     * @return usdtOut Amount of USDT returned to the receiver
     * @dev Implements IBridgeableVault interface for bridge withdrawals
     * @dev Can only be called in Withdraw mode by authorized bridge contract
     * @dev KYC users receive pro-rata share of USDT based on their share ownership
     */
    function redeemBridge(
        uint256 shares,
        address receiver,
        address owner
    )
        external
        override
        nonReentrant
        onlyNonZeroAmount(shares)
        onlyCallerIsBridge
        onlyMode(OperationalMode.Withdraw)
        returns (uint256 usdtOut)
    {
        // Preview conversion
        (usdtOut,,) = previewRedeem(owner, shares);
        if (usdtOut == 0) revert ZeroAmount();

        // Handle allowance if caller is not owner
        if (msg.sender != owner) {
            _spendAllowance(owner, msg.sender, shares);
        }

        // Update accounting
        sharesKyc -= shares;

        // Burn shares from owner
        _burn(owner, shares);

        // Transfer USDT to receiver
        USDT.safeTransfer(receiver, usdtOut);

        // Emit event
        emit KYCRedeem(msg.sender, receiver, owner, usdtOut, shares);
    }

    /**
     * @notice Preview the amount of assets that would be received for bridge redemption
     * @param shares Amount of shares to preview redemption for
     * @return assets Amount of USDT that would be received
     * @dev Implements IBridgeableVault interface
     * @dev Uses the KYC-specific previewRedeem with msg.sender for compatibility
     */
    function previewRedeemBridge(uint256 shares) external view override returns (uint256 assets) {
        // Use the KYC-specific previewRedeem function with msg.sender
        // This will check if the caller is KYC'd and return appropriate amounts
        (uint256 usdtOut,,) = previewRedeem(msg.sender, shares);
        return usdtOut;
    }

    // ------------------------------------------

    /**
     * @notice Override internal _update to restrict share transfers
     * @param from Sender address
     * @param to Recipient address
     * @param value Amount of shares to transfer
     * @dev Only KYC users can transfer to bridge during Withdraw phase
     *      Mints and burns (from or to address(0)) are always allowed
     */
    function _update(address from, address to, uint256 value) internal virtual override {
        if (
            from == address(0) || to == address(0)
                || (_mode == OperationalMode.Withdraw && _isKycApproved(from) && to == _bridgeContract)
        ) {
            super._update(from, to, value);
            return;
        }
        revert TransfersDisabled();
    }

    // ------------------------------------------
    // Internal Functions
    // ------------------------------------------

    /**
     * @notice Internal helper to convert shares to assets (always rounds down)
     * @param shares Amount of shares to convert
     * @param supply Current supply of shares in the pool
     * @param totalAssets Current total assets in the pool
     * @return Amount of assets equivalent to the shares
     */
    function _convertToAssets(uint256 shares, uint256 supply, uint256 totalAssets) internal pure returns (uint256) {
        if (supply == 0) return 0;
        return Math.mulDiv(shares, totalAssets, supply, Math.Rounding.Floor);
    }

    /**
     * @notice Transitions the vault to a new operational mode
     * @param newMode The new operational mode
     * @dev It is the job of the caller to ensure the prevMode -> newMode transition is valid
     */
    function _transitionToModeUnsafe(OperationalMode newMode) private {
        OperationalMode prevMode = _mode;
        _mode = newMode;
        emit OperationalModeChanged(prevMode, newMode);
    }

    // ------------------------------------------
    // Internal Execution Functions (ERC4626-style)
    // ------------------------------------------

    /**
     * @notice Internal function to set KYC status and update accounting
     * @param user Address to update
     * @param status KYC status to set
     * @dev user validated to be non-zero address at call site
     */
    function _setKycStatusWithAccounting(address user, bool status) internal {
        uint256 userShares = balanceOf(user);
        if (userShares == 0) revert NoSharesFound();

        // Update KYC status using base contract function (emits KYCStatusSet event)
        // Note: _setKycStatus will revert if status is unchanged, guaranteeing the status is different
        _setKycStatus(user, status);

        // Update share and asset accounting based on status change
        // We know status changed, so we can simplify the logic
        if (status) {
            // Marking as KYC - move from non-KYC pool to KYC pool
            sharesNonKyc -= userShares;
            sharesKyc += userShares;
            usdcKycDeployable += userShares;
        } else {
            // Unmarking as KYC - move from KYC pool back to non-KYC pool
            sharesNonKyc += userShares;
            sharesKyc -= userShares;
            usdcKycDeployable -= userShares;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {IERC165, ERC165} from "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    mapping(bytes32 role => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /// @inheritdoc IERC165
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        return _roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        if (!hasRole(role, account)) {
            _roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` from `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        if (hasRole(role, account)) {
            _roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * Both values are immutable: they can only be set once during construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /// @inheritdoc IERC20
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /// @inheritdoc IERC20
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /// @inheritdoc IERC20
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "./IERC20Permit.sol";
import {ERC20} from "../ERC20.sol";
import {ECDSA} from "../../../utils/cryptography/ECDSA.sol";
import {EIP712} from "../../../utils/cryptography/EIP712.sol";
import {Nonces} from "../../../utils/Nonces.sol";

/**
 * @dev Implementation of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712, Nonces {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC-20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /// @inheritdoc IERC20Permit
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /// @inheritdoc IERC20Permit
    function nonces(address owner) public view virtual override(IERC20Permit, Nonces) returns (uint256) {
        return super.nonces(owner);
    }

    /// @inheritdoc IERC20Permit
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Return the 512-bit addition of two uint256.
     *
     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.
     */
    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        assembly ("memory-safe") {
            low := add(a, b)
            high := lt(low, a)
        }
    }

    /**
     * @dev Return the 512-bit multiplication of two uint256.
     *
     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.
     */
    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
        // variables such that product = high * 2²⁵⁶ + low.
        assembly ("memory-safe") {
            let mm := mulmod(a, b, not(0))
            low := mul(a, b)
            high := sub(sub(mm, low), lt(mm, low))
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            success = c >= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a - b;
            success = c <= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a * b;
            assembly ("memory-safe") {
                // Only true when the multiplication doesn't overflow
                // (c / a == b) || (a == 0)
                success := or(eq(div(c, a), b), iszero(a))
            }
            // equivalent to: success ? c : 0
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `DIV` opcode returns zero when the denominator is 0.
                result := div(a, b)
            }
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `MOD` opcode returns zero when the denominator is 0.
                result := mod(a, b)
            }
        }
    }

    /**
     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryAdd(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.
     */
    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {
        (, uint256 result) = trySub(a, b);
        return result;
    }

    /**
     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryMul(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);

            // Handle non-overflow cases, 256 by 256 division.
            if (high == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return low / denominator;
            }

            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
            if (denominator <= high) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [high low].
            uint256 remainder;
            assembly ("memory-safe") {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                high := sub(high, gt(remainder, low))
                low := sub(low, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly ("memory-safe") {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [high low] by twos.
                low := div(low, twos)

                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from high into low.
            low |= high * twos;

            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high
            // is no longer required.
            result = low * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.
     */
    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);
            if (high >= 1 << n) {
                Panic.panic(Panic.UNDER_OVERFLOW);
            }
            return (high << (256 - n)) | (low >> n);
        }
    }

    /**
     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.
     */
    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {
        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax ≡ 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        assembly ("memory-safe") {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `ε_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
            // This is going to be our x_0 (and ε_0)
            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              ≥ 0
            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // ε_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | ε_n² / (2 * x_n) |
            //         = ε_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // ε_1 = ε_0² / | (2 * x_0) |
            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))
            //     ≤ 2**(e-3) / 3
            //     ≤ 2**(e-3-log2(3))
            //     ≤ 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
            // ε_{n+1} = ε_n² / | (2 * x_n) |
            //         ≤ (2**(e-k))² / (2 * 2**(e-1))
            //         ≤ 2**(2*e-2*k) / 2**e
            //         ≤ 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72

            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // If upper 8 bits of 16-bit half set, add 8 to result
        r |= SafeCast.toUint((x >> r) > 0xff) << 3;
        // If upper 4 bits of 8-bit half set, add 4 to result
        r |= SafeCast.toUint((x >> r) > 0xf) << 2;

        // Shifts value right by the current result and use it as an index into this lookup table:
        //
        // | x (4 bits) |  index  | table[index] = MSB position |
        // |------------|---------|-----------------------------|
        // |    0000    |    0    |        table[0] = 0         |
        // |    0001    |    1    |        table[1] = 0         |
        // |    0010    |    2    |        table[2] = 1         |
        // |    0011    |    3    |        table[3] = 1         |
        // |    0100    |    4    |        table[4] = 2         |
        // |    0101    |    5    |        table[5] = 2         |
        // |    0110    |    6    |        table[6] = 2         |
        // |    0111    |    7    |        table[7] = 2         |
        // |    1000    |    8    |        table[8] = 3         |
        // |    1001    |    9    |        table[9] = 3         |
        // |    1010    |   10    |        table[10] = 3        |
        // |    1011    |   11    |        table[11] = 3        |
        // |    1100    |   12    |        table[12] = 3        |
        // |    1101    |   13    |        table[13] = 3        |
        // |    1110    |   14    |        table[14] = 3        |
        // |    1111    |   15    |        table[15] = 3        |
        //
        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.
        assembly ("memory-safe") {
            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))
        }
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8
        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

/**
 * @title HourglassStableVaultBridgeManager
 * @author Hourglass
 * @notice Abstract contract that manages bridge for Stable pre-deposit vaults
 */
abstract contract HourglassStableVaultBridgeManager {
    // ---------------------------------------------
    // Events
    // ---------------------------------------------

    /**
     * @notice Emitted when the bridge contract address is updated
     * @param bridge Address of the new bridge contract
     */
    event BridgeContractSet(address indexed bridge);

    // ---------------------------------------------
    // Errors
    // ---------------------------------------------

    /**
     * @notice Thrown when a non-bridge caller attempts to execute a bridge-only function
     */
    error CallerIsNotBridge();

    /**
     * @notice Thrown when attempting to set a bridge address to the zero address
     */
    error InvalidBridgeAddress();

    /**
     * @notice Thrown when bridge-only function is called but bridge is not set
     */
    error BridgeNotSet();

    // ---------------------------------------------
    // State Variables
    // ---------------------------------------------

    /**
     * @notice The address of the bridge contract
     */
    address internal _bridgeContract;

    // ---------------------------------------------
    // Modifiers
    // ---------------------------------------------

    /**
     * @notice Restricts function access to only the bridge contract
     */
    modifier onlyCallerIsBridge() {
        if (_bridgeContract == address(0)) {
            revert BridgeNotSet();
        }
        if (msg.sender != _bridgeContract) {
            revert CallerIsNotBridge();
        }
        _;
    }

    // ---------------------------------------------
    // Internal Functions - Setters
    // ---------------------------------------------

    /**
     * @notice Sets the bridge contract address
     * @param newBridge Address of the bridge contract to authorize
     */
    function _setBridgeContract(address newBridge) internal {
        if (newBridge == address(0)) revert InvalidBridgeAddress();
        _bridgeContract = newBridge;
        emit BridgeContractSet(newBridge);
    }

    // ---------------------------------------------
    // External Functions - Views
    // ---------------------------------------------

    /**
     * @notice Returns the current bridge contract address
     * @return The address of the bridge contract
     */
    function bridgeContract() external view returns (address) {
        return _bridgeContract;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

/**
 * @title HourglassStableVaultDepositCapManager
 * @author Hourglass
 * @notice Abstract contract that manages deposit caps for Stable pre-deposit vaults
 * @dev It is the responsibility of child contracts to enforce the deposit cap during deposit operations.
 *      This contract merely provides a standard way of setting the cap and checking against it.
 */
abstract contract HourglassStableVaultDepositCapManager {
    // ---------------------------------------------
    // Events
    // ---------------------------------------------

    /**
     * @notice Emitted when the deposit cap is updated
     * @param cap New maximum total deposits allowed in the vault
     */
    event DepositCapSet(uint256 indexed cap);

    // ---------------------------------------------
    // Errors
    // ---------------------------------------------

    /**
     * @notice Thrown when attempting to set an invalid deposit cap
     */
    error InvalidDepositCap();

    /**
     * @notice Thrown when a deposit would exceed the configured deposit cap
     * @dev This error is not used within this contract and is intended for use in
     *      child contracts when validating deposits.
     */
    error DepositExceedsCap();

    // ---------------------------------------------
    // State Variables
    // ---------------------------------------------

    /**
     * @notice Maximum total deposits allowed in the vault
     */
    uint256 internal _depositCap;

    // ---------------------------------------------
    // Constructor
    // ---------------------------------------------

    /**
     * @notice Initializes the deposit cap
     * @param __depositCap Maximum total deposits allowed in the vault
     * @dev Assumes current deposits is 0 upon initialization
     */
    constructor(uint256 __depositCap) {
        _setDepositCap(0, __depositCap);
    }

    // ---------------------------------------------
    // Internal Functions - Setters
    // ---------------------------------------------

    /**
     * @notice Set the deposit cap for the vault
     * @param currentDeposits Current total deposits in the vault
     * @param newCap New maximum deposit limit to set
     * @dev This function validates that:
     *      - The new cap is not zero
     *      - The new cap is not below current deposits
     */
    function _setDepositCap(uint256 currentDeposits, uint256 newCap) internal {
        if (newCap == 0 || newCap < currentDeposits) revert InvalidDepositCap();
        _depositCap = newCap;
        emit DepositCapSet(newCap);
    }

    // ---------------------------------------------
    // Internal Functions - Views
    // ---------------------------------------------

    /**
     * @notice Calculates the maximum amount that can be deposited given the current cap
     * @param currentDeposits Current total deposits in the vault
     * @return Maximum additional deposits that can be accepted
     */
    function _getMaxDepositAgainstCap(uint256 currentDeposits) internal view returns (uint256) {
        return _depositCap > currentDeposits ? _depositCap - currentDeposits : 0;
    }

    // ---------------------------------------------
    // External Functions - Views
    // ---------------------------------------------

    /**
     * @notice Returns the current deposit cap
     * @return Current maximum total deposits allowed in the vault
     */
    function depositCap() external view returns (uint256) {
        return _depositCap;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

/**
 * @title HourglassStableVaultDepositWindowManager
 * @author Hourglass
 * @notice Abstract contract that manages time-windowed deposit periods for pre-deposit vaults
 */
abstract contract HourglassStableVaultDepositWindowManager {
    // ---------------------------------------------
    // Events
    // ---------------------------------------------

    /**
     * @notice Emitted when a deposit window is configured or updated
     * @param start Unix timestamp when deposits open (inclusive)
     * @param end Unix timestamp when deposits close (inclusive)
     */
    event DepositWindowSet(uint64 indexed start, uint64 indexed end);

    // ---------------------------------------------
    // Errors
    // ---------------------------------------------

    /**
     * @notice Thrown when operation requires window to be open, but it is not
     */
    error DepositWindowNotOpen();

    /**
     * @notice Thrown when operation requires window to have ended, but it is not
     */
    error DepositWindowNotEnded();

    /**
     * @notice Thrown when attempting to modify a deposit window that cannot be changed
     */
    error WindowCannotBeSet();

    /**
     * @notice Thrown when window parameters are invalid
     */
    error WindowInvalid();

    // ---------------------------------------------
    // State Variables
    // ---------------------------------------------

    /**
     * @notice Unix timestamp when deposits open (inclusive)
     */
    uint64 internal _depositStart;

    /**
     * @notice Unix timestamp when deposits close (inclusive)
     */
    uint64 internal _depositEnd;

    // ---------------------------------------------
    // Constructor
    // ---------------------------------------------

    /**
     * @notice Initializes the deposit window parameters
     * @param __depositStart Unix timestamp when deposits should open
     * @param __depositEnd Unix timestamp when deposits should close
     */
    constructor(uint64 __depositStart, uint64 __depositEnd) {
        _modifyPendingDepositWindow(__depositStart, __depositEnd);
    }

    // ---------------------------------------------
    // Modifiers
    // ---------------------------------------------

    /**
     * @notice Ensures that the deposit window is currently open
     */
    modifier onlyWhenDepositWindowOpen() {
        if (!_depositWindowOpen()) {
            revert DepositWindowNotOpen();
        }
        _;
    }

    /**
     * @notice Ensures that the deposit window has ended
     */
    modifier onlyAfterDepositWindow() {
        if (!_depositWindowEnded()) {
            revert DepositWindowNotEnded();
        }
        _;
    }

    // ---------------------------------------------
    // Internal Functions - Setters
    // ---------------------------------------------

    /**
     * @notice Modifies the start and end timestamp of a pending deposit window
     * @param newStart Unix timestamp when deposits should open
     * @param newEnd Unix timestamp when deposits should close
     * @dev This function can only be called:
     *      1. When no window has been set
     *      2. When a window is set but hasn't started yet
     *
     *      Validation ensures:
     *      - Neither timestamp is zero
     *      - Start time is before end time
     *      - Start time is in the future
     */
    function _modifyPendingDepositWindow(uint64 newStart, uint64 newEnd) internal {
        bool isInitialSetup = (_depositStart == 0 && _depositEnd == 0);
        bool isBeforeStart = (_depositStart != 0 && block.timestamp < _depositStart);
        if (!isInitialSetup && !isBeforeStart) {
            revert WindowCannotBeSet();
        }

        // Window cannot have zero bounds
        if (newStart == 0 || newEnd == 0) revert WindowInvalid();
        // Window start must precede end
        if (newStart >= newEnd) revert WindowInvalid();
        // Window must be in the future
        if (newStart <= block.timestamp) revert WindowInvalid();

        _depositStart = newStart;
        _depositEnd = newEnd;

        emit DepositWindowSet(newStart, newEnd);
    }

    /**
     * @notice Modifies the end timestamp of a deposit window that has already started
     * @param newEnd New unix timestamp when deposits should close (must be in future)
     * @dev Requirements:
     *      - Window must have already started
     *        - Note: Window can be currently open or already ended
     *      - New end must be in future
     *      - New end time must be after current start time
     */
    function _modifyStartedDepositWindow(uint64 newEnd) internal {
        // Window must be started
        if (_depositStart > block.timestamp) revert WindowCannotBeSet();
        // New end must be in the future
        if (newEnd <= block.timestamp) revert WindowInvalid();

        _depositEnd = newEnd;

        emit DepositWindowSet(_depositStart, newEnd);
    }

    // ---------------------------------------------
    // Internal Functions - Views
    // ---------------------------------------------

    /**
     * @notice Checks if the deposit window is currently open
     * @return True if current time is within the deposit window, false otherwise
     * @dev Window is considered open when:
     *      - Current time >= start time
     *      - Current time <= end time
     */
    function _depositWindowOpen() internal view returns (bool) {
        return block.timestamp >= _depositStart && block.timestamp <= _depositEnd;
    }

    /**
     * @notice Checks if the deposit window has ended
     * @return True if current time is after the deposit window end time
     * @dev Window is considered ended when current time > end time
     */
    function _depositWindowEnded() internal view returns (bool) {
        return block.timestamp > _depositEnd;
    }

    // ---------------------------------------------
    // External Functions - Views
    // ---------------------------------------------

    /**
     * @notice Returns the deposit window start timestamp
     * @return Unix timestamp when deposits open (inclusive)
     */
    function depositStart() external view returns (uint64) {
        return _depositStart;
    }

    /**
     * @notice Returns the deposit window end timestamp
     * @return Unix timestamp when deposits close (inclusive)
     */
    function depositEnd() external view returns (uint64) {
        return _depositEnd;
    }

    /**
     * @notice Returns the complete deposit window parameters
     * @return start Unix timestamp when deposits open (inclusive)
     * @return end Unix timestamp when deposits close (inclusive)
     */
    function depositWindow() external view returns (uint64 start, uint64 end) {
        return (_depositStart, _depositEnd);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

abstract contract HourglassStableVaultKYCManager {
    // ===== Events =====
    event KYCStatusSet(address indexed account, bool status);

    // ===== Errors =====
    error UserZeroAddress();
    error NotKycApproved();
    error AlreadyKycApproved();
    error KycStatusUnchanged(address user, bool currentStatus);

    // ===== Storage =====
    mapping(address account => bool isKycApproved) private _kycStatus;

    // ===== Modifiers =====
    modifier onlyKycApproved(address account) {
        if (!_kycStatus[account]) revert NotKycApproved();
        _;
    }

    modifier onlyNonKyc(address account) {
        if (_kycStatus[account]) revert AlreadyKycApproved();
        _;
    }

    // ===== Internal Setters =====
    function _setKycStatus(address account, bool status) internal {
        if (account == address(0)) revert UserZeroAddress();
        if (_kycStatus[account] == status) revert KycStatusUnchanged(account, status);
        _kycStatus[account] = status;
        emit KYCStatusSet(account, status);
    }

    // ===== Views =====
    function _isKycApproved(address account) internal view returns (bool) {
        return _kycStatus[account];
    }

    function isKycApproved(address account) external view returns (bool) {
        return _kycStatus[account];
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

/**
 * @title HourglassStableVaultTreasuryManager
 * @author Hourglass
 * @notice Abstract contract that manages treasury authorization for Stable pre-deposit vaults
 */
abstract contract HourglassStableVaultTreasuryManager {
    // ---------------------------------------------
    // Events
    // ---------------------------------------------

    /**
     * @notice Emitted when the treasury address is set or updated
     * @param treasury Address of the newly authorized treasury
     */
    event TreasuryAddressSet(address indexed treasury);

    // ---------------------------------------------
    // Errors
    // ---------------------------------------------

    /**
     * @notice Thrown when attempting to set a treasury address to the zero address
     */
    error InvalidTreasuryAddress();

    /**
     * @notice Thrown when an operation requires treasury to be set but it is not
     */
    error TreasuryNotSet();

    // ---------------------------------------------
    // State Variables
    // ---------------------------------------------

    /**
     * @notice The address of the authorized treasury
     */
    address internal _treasuryAddress;

    // ---------------------------------------------
    // Constructor
    // ---------------------------------------------

    /**
     * @notice Initializes the treasury address
     * @param __treasuryAddress Initial treasury address
     */
    constructor(address __treasuryAddress) {
        _setTreasuryAddress(__treasuryAddress);
    }

    // ---------------------------------------------
    // Modifiers
    // ---------------------------------------------

    /**
     * @notice Ensures that the treasury address has been set
     */
    modifier onlyWhenTreasurySet() {
        if (_treasuryAddress == address(0)) {
            revert TreasuryNotSet();
        }
        _;
    }

    // ---------------------------------------------
    // Internal Functions - Setters
    // ---------------------------------------------

    /**
     * @notice Sets the authorized treasury address
     * @param newTreasury Address of the treasury to authorize
     * @dev This function validates that:
     *      - The new treasury address is not zero
     */
    function _setTreasuryAddress(address newTreasury) internal {
        if (newTreasury == address(0)) revert InvalidTreasuryAddress();
        _treasuryAddress = newTreasury;
        emit TreasuryAddressSet(newTreasury);
    }

    // ---------------------------------------------
    // External Functions - Views
    // ---------------------------------------------

    /**
     * @notice Returns the currently authorized treasury address
     * @return The address of the authorized treasury
     */
    function treasuryAddress() external view returns (address) {
        return _treasuryAddress;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.29;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title IBridgeableVault
 * @author Hourglass
 * @notice Unified interface for all Hourglass vaults to enable bridging operations
 * @dev This interface provides a common redemption method that works across all vault types
 * @dev Extends IERC20 to ensure transferFrom and balanceOf are available
 */
interface IBridgeableVault is IERC20 {
    /**
     * @notice Redeems vault shares for underlying assets for bridge operations
     * @param shares Amount of vault shares to redeem
     * @param receiver Address to receive the redeemed assets
     * @param owner Address that owns the shares being redeemed
     * @return assets Amount of underlying assets returned
     * @dev This function provides a unified interface for both ERC4626 and KYC vaults
     * @dev For ERC4626 vaults, this delegates to the standard redeem function
     * @dev For KYC vaults, this wraps the redeemKyc function
     */
    function redeemBridge(uint256 shares, address receiver, address owner) external returns (uint256 assets);

    /**
     * @notice Preview the amount of assets that would be received for bridge redemption
     * @param shares Amount of shares to preview redemption for
     * @return assets Amount of assets that would be received
     */
    function previewRedeemBridge(uint256 shares) external view returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (access/IAccessControl.sol)

pragma solidity >=0.8.4;

/**
 * @dev External interface of AccessControl declared to support ERC-165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted to signal this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).
     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /// @inheritdoc IERC165
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity >=0.6.2;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC6093.sol)
pragma solidity >=0.8.4;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[ERC-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC-20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(
        bytes32 hash,
        bytes memory signature
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly ("memory-safe") {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "./MessageHashUtils.sol";
import {ShortStrings, ShortString} from "../ShortStrings.sol";
import {IERC5267} from "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP-712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP-712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    // slither-disable-next-line constable-states
    string private _nameFallback;
    // slither-disable-next-line constable-states
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP-712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /// @inheritdoc IERC5267
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    mapping(address account => uint256) private _nonces;

    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return _nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 *
 * _Available since v5.1._
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        assembly ("memory-safe") {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }

    /**
     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
     */
    function toUint(bool b) internal pure returns (uint256 u) {
        assembly ("memory-safe") {
            u := iszero(iszero(b))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.
     */
    function toDataWithIntendedValidatorHash(
        address validator,
        bytes32 messageHash
    ) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, hex"19_00")
            mstore(0x02, shl(96, validator))
            mstore(0x16, messageHash)
            digest := keccak256(0x00, 0x36)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        assembly ("memory-safe") {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {toShortStringWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {toShortStringWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC5267.sol)

pragma solidity >=0.4.16;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)

pragma solidity >=0.4.16;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SafeCast} from "./math/SafeCast.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    using SafeCast for *;

    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;
    uint256 private constant SPECIAL_CHARS_LOOKUP =
        (1 << 0x08) | // backspace
            (1 << 0x09) | // tab
            (1 << 0x0a) | // newline
            (1 << 0x0c) | // form feed
            (1 << 0x0d) | // carriage return
            (1 << 0x22) | // double quote
            (1 << 0x5c); // backslash

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev The string being parsed contains characters that are not in scope of the given base.
     */
    error StringsInvalidChar();

    /**
     * @dev The string being parsed is not a properly formatted address.
     */
    error StringsInvalidAddressFormat();

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            assembly ("memory-safe") {
                ptr := add(add(buffer, 0x20), length)
            }
            while (true) {
                ptr--;
                assembly ("memory-safe") {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its checksummed ASCII `string` hexadecimal
     * representation, according to EIP-55.
     */
    function toChecksumHexString(address addr) internal pure returns (string memory) {
        bytes memory buffer = bytes(toHexString(addr));

        // hash the hex part of buffer (skip length + 2 bytes, length 40)
        uint256 hashValue;
        assembly ("memory-safe") {
            hashValue := shr(96, keccak256(add(buffer, 0x22), 40))
        }

        for (uint256 i = 41; i > 1; --i) {
            // possible values for buffer[i] are 48 (0) to 57 (9) and 97 (a) to 102 (f)
            if (hashValue & 0xf > 7 && uint8(buffer[i]) > 96) {
                // case shift by xoring with 0x20
                buffer[i] ^= 0x20;
            }
            hashValue >>= 4;
        }
        return string(buffer);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }

    /**
     * @dev Parse a decimal string and returns the value as a `uint256`.
     *
     * Requirements:
     * - The string must be formatted as `[0-9]*`
     * - The result must fit into an `uint256` type
     */
    function parseUint(string memory input) internal pure returns (uint256) {
        return parseUint(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseUint-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `[0-9]*`
     * - The result must fit into an `uint256` type
     */
    function parseUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {
        (bool success, uint256 value) = tryParseUint(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseUint-string} that returns false if the parsing fails because of an invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseUint(string memory input) internal pure returns (bool success, uint256 value) {
        return _tryParseUintUncheckedBounds(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseUint-string-uint256-uint256} that returns false if the parsing fails because of an invalid
     * character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseUint(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, uint256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseUintUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseUint-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseUintUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, uint256 value) {
        bytes memory buffer = bytes(input);

        uint256 result = 0;
        for (uint256 i = begin; i < end; ++i) {
            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));
            if (chr > 9) return (false, 0);
            result *= 10;
            result += chr;
        }
        return (true, result);
    }

    /**
     * @dev Parse a decimal string and returns the value as a `int256`.
     *
     * Requirements:
     * - The string must be formatted as `[-+]?[0-9]*`
     * - The result must fit in an `int256` type.
     */
    function parseInt(string memory input) internal pure returns (int256) {
        return parseInt(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseInt-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `[-+]?[0-9]*`
     * - The result must fit in an `int256` type.
     */
    function parseInt(string memory input, uint256 begin, uint256 end) internal pure returns (int256) {
        (bool success, int256 value) = tryParseInt(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseInt-string} that returns false if the parsing fails because of an invalid character or if
     * the result does not fit in a `int256`.
     *
     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.
     */
    function tryParseInt(string memory input) internal pure returns (bool success, int256 value) {
        return _tryParseIntUncheckedBounds(input, 0, bytes(input).length);
    }

    uint256 private constant ABS_MIN_INT256 = 2 ** 255;

    /**
     * @dev Variant of {parseInt-string-uint256-uint256} that returns false if the parsing fails because of an invalid
     * character or if the result does not fit in a `int256`.
     *
     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.
     */
    function tryParseInt(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, int256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseIntUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseInt-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseIntUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, int256 value) {
        bytes memory buffer = bytes(input);

        // Check presence of a negative sign.
        bytes1 sign = begin == end ? bytes1(0) : bytes1(_unsafeReadBytesOffset(buffer, begin)); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        bool positiveSign = sign == bytes1("+");
        bool negativeSign = sign == bytes1("-");
        uint256 offset = (positiveSign || negativeSign).toUint();

        (bool absSuccess, uint256 absValue) = tryParseUint(input, begin + offset, end);

        if (absSuccess && absValue < ABS_MIN_INT256) {
            return (true, negativeSign ? -int256(absValue) : int256(absValue));
        } else if (absSuccess && negativeSign && absValue == ABS_MIN_INT256) {
            return (true, type(int256).min);
        } else return (false, 0);
    }

    /**
     * @dev Parse a hexadecimal string (with or without "0x" prefix), and returns the value as a `uint256`.
     *
     * Requirements:
     * - The string must be formatted as `(0x)?[0-9a-fA-F]*`
     * - The result must fit in an `uint256` type.
     */
    function parseHexUint(string memory input) internal pure returns (uint256) {
        return parseHexUint(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseHexUint-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `(0x)?[0-9a-fA-F]*`
     * - The result must fit in an `uint256` type.
     */
    function parseHexUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {
        (bool success, uint256 value) = tryParseHexUint(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseHexUint-string} that returns false if the parsing fails because of an invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseHexUint(string memory input) internal pure returns (bool success, uint256 value) {
        return _tryParseHexUintUncheckedBounds(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseHexUint-string-uint256-uint256} that returns false if the parsing fails because of an
     * invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseHexUint(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, uint256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseHexUintUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseHexUint-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseHexUintUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, uint256 value) {
        bytes memory buffer = bytes(input);

        // skip 0x prefix if present
        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(buffer, begin)) == bytes2("0x"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        uint256 offset = hasPrefix.toUint() * 2;

        uint256 result = 0;
        for (uint256 i = begin + offset; i < end; ++i) {
            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));
            if (chr > 15) return (false, 0);
            result *= 16;
            unchecked {
                // Multiplying by 16 is equivalent to a shift of 4 bits (with additional overflow check).
                // This guarantees that adding a value < 16 will not cause an overflow, hence the unchecked.
                result += chr;
            }
        }
        return (true, result);
    }

    /**
     * @dev Parse a hexadecimal string (with or without "0x" prefix), and returns the value as an `address`.
     *
     * Requirements:
     * - The string must be formatted as `(0x)?[0-9a-fA-F]{40}`
     */
    function parseAddress(string memory input) internal pure returns (address) {
        return parseAddress(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseAddress-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `(0x)?[0-9a-fA-F]{40}`
     */
    function parseAddress(string memory input, uint256 begin, uint256 end) internal pure returns (address) {
        (bool success, address value) = tryParseAddress(input, begin, end);
        if (!success) revert StringsInvalidAddressFormat();
        return value;
    }

    /**
     * @dev Variant of {parseAddress-string} that returns false if the parsing fails because the input is not a properly
     * formatted address. See {parseAddress-string} requirements.
     */
    function tryParseAddress(string memory input) internal pure returns (bool success, address value) {
        return tryParseAddress(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseAddress-string-uint256-uint256} that returns false if the parsing fails because input is not a properly
     * formatted address. See {parseAddress-string-uint256-uint256} requirements.
     */
    function tryParseAddress(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, address value) {
        if (end > bytes(input).length || begin > end) return (false, address(0));

        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(bytes(input), begin)) == bytes2("0x"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        uint256 expectedLength = 40 + hasPrefix.toUint() * 2;

        // check that input is the correct length
        if (end - begin == expectedLength) {
            // length guarantees that this does not overflow, and value is at most type(uint160).max
            (bool s, uint256 v) = _tryParseHexUintUncheckedBounds(input, begin, end);
            return (s, address(uint160(v)));
        } else {
            return (false, address(0));
        }
    }

    function _tryParseChr(bytes1 chr) private pure returns (uint8) {
        uint8 value = uint8(chr);

        // Try to parse `chr`:
        // - Case 1: [0-9]
        // - Case 2: [a-f]
        // - Case 3: [A-F]
        // - otherwise not supported
        unchecked {
            if (value > 47 && value < 58) value -= 48;
            else if (value > 96 && value < 103) value -= 87;
            else if (value > 64 && value < 71) value -= 55;
            else return type(uint8).max;
        }

        return value;
    }

    /**
     * @dev Escape special characters in JSON strings. This can be useful to prevent JSON injection in NFT metadata.
     *
     * WARNING: This function should only be used in double quoted JSON strings. Single quotes are not escaped.
     *
     * NOTE: This function escapes all unicode characters, and not just the ones in ranges defined in section 2.5 of
     * RFC-4627 (U+0000 to U+001F, U+0022 and U+005C). ECMAScript's `JSON.parse` does recover escaped unicode
     * characters that are not in this range, but other tooling may provide different results.
     */
    function escapeJSON(string memory input) internal pure returns (string memory) {
        bytes memory buffer = bytes(input);
        bytes memory output = new bytes(2 * buffer.length); // worst case scenario
        uint256 outputLength = 0;

        for (uint256 i; i < buffer.length; ++i) {
            bytes1 char = bytes1(_unsafeReadBytesOffset(buffer, i));
            if (((SPECIAL_CHARS_LOOKUP & (1 << uint8(char))) != 0)) {
                output[outputLength++] = "\\";
                if (char == 0x08) output[outputLength++] = "b";
                else if (char == 0x09) output[outputLength++] = "t";
                else if (char == 0x0a) output[outputLength++] = "n";
                else if (char == 0x0c) output[outputLength++] = "f";
                else if (char == 0x0d) output[outputLength++] = "r";
                else if (char == 0x5c) output[outputLength++] = "\\";
                else if (char == 0x22) {
                    // solhint-disable-next-line quotes
                    output[outputLength++] = '"';
                }
            } else {
                output[outputLength++] = char;
            }
        }
        // write the actual length and deallocate unused memory
        assembly ("memory-safe") {
            mstore(output, outputLength)
            mstore(0x40, add(output, shl(5, shr(5, add(outputLength, 63)))))
        }

        return string(output);
    }

    /**
     * @dev Reads a bytes32 from a bytes array without bounds checking.
     *
     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the
     * assembly block as such would prevent some optimizations.
     */
    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {
        // This is not memory safe in the general case, but all calls to this private function are within bounds.
        assembly ("memory-safe") {
            value := mload(add(add(buffer, 0x20), offset))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC-1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * TIP: Consider using this library along with {SlotDerivation}.
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct Int256Slot {
        int256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `Int256Slot` with member `value` located at `slot`.
     */
    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns a `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns a `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        assembly ("memory-safe") {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, int256 a, int256 b) internal pure returns (int256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * int256(SafeCast.toUint(condition)));
        }
    }

    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // Formula from the "Bit Twiddling Hacks" by Sean Eron Anderson.
            // Since `n` is a signed integer, the generated bytecode will use the SAR opcode to perform the right shift,
            // taking advantage of the most significant (or "sign" bit) in two's complement representation.
            // This opcode adds new most significant bits set to the value of the previous most significant bit. As a result,
            // the mask will either be `bytes32(0)` (if n is positive) or `~bytes32(0)` (if n is negative).
            int256 mask = n >> 255;

            // A `bytes32(0)` mask leaves the input unchanged, while a `~bytes32(0)` mask complements it.
            return uint256((n + mask) ^ mask);
        }
    }
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/openzeppelin-contracts/lib/forge-std/src/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "prague",
  "viaIR": false
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_admin","type":"address"},{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"uint256","name":"_depositCap","type":"uint256"},{"internalType":"uint64","name":"_depositStart","type":"uint64"},{"internalType":"uint64","name":"_depositEnd","type":"uint64"},{"internalType":"address","name":"_treasuryAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[],"name":"AlreadyKycApproved","type":"error"},{"inputs":[{"internalType":"uint256","name":"provided","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"BatchTooLarge","type":"error"},{"inputs":[],"name":"BridgeNotSet","type":"error"},{"inputs":[],"name":"CallerIsNotBridge","type":"error"},{"inputs":[],"name":"DepositExceedsCap","type":"error"},{"inputs":[],"name":"DepositWindowNotEnded","type":"error"},{"inputs":[],"name":"DepositWindowNotOpen","type":"error"},{"inputs":[],"name":"ECDSAInvalidSignature","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ECDSAInvalidSignatureLength","type":"error"},{"inputs":[{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"ECDSAInvalidSignatureS","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"ERC2612ExpiredSignature","type":"error"},{"inputs":[{"internalType":"address","name":"signer","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC2612InvalidSigner","type":"error"},{"inputs":[],"name":"EmptyBatch","type":"error"},{"inputs":[],"name":"InsufficientBalance","type":"error"},{"inputs":[],"name":"InsufficientFundsForDeployment","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"currentNonce","type":"uint256"}],"name":"InvalidAccountNonce","type":"error"},{"inputs":[],"name":"InvalidBridgeAddress","type":"error"},{"inputs":[],"name":"InvalidDepositCap","type":"error"},{"inputs":[{"internalType":"enum OperationalMode","name":"currentMode","type":"uint8"},{"internalType":"enum OperationalMode","name":"expectedMode","type":"uint8"}],"name":"InvalidOperationalMode","type":"error"},{"inputs":[],"name":"InvalidShortString","type":"error"},{"inputs":[],"name":"InvalidTreasuryAddress","type":"error"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"bool","name":"currentStatus","type":"bool"}],"name":"KycStatusUnchanged","type":"error"},{"inputs":[],"name":"NoSharesFound","type":"error"},{"inputs":[],"name":"NotKycApproved","type":"error"},{"inputs":[],"name":"RecoverZeroAmount","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"RecoveryForbidden","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[{"internalType":"string","name":"str","type":"string"}],"name":"StringTooLong","type":"error"},{"inputs":[],"name":"TransfersDisabled","type":"error"},{"inputs":[],"name":"TransitionToRecoveryFailed","type":"error"},{"inputs":[],"name":"TreasuryNotSet","type":"error"},{"inputs":[],"name":"UserZeroAddress","type":"error"},{"inputs":[],"name":"WindowCannotBeSet","type":"error"},{"inputs":[],"name":"WindowInvalid","type":"error"},{"inputs":[],"name":"ZeroAddress","type":"error"},{"inputs":[],"name":"ZeroAmount","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"bridge","type":"address"}],"name":"BridgeContractSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"cap","type":"uint256"}],"name":"DepositCapSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"start","type":"uint64"},{"indexed":true,"internalType":"uint64","name":"end","type":"uint64"}],"name":"DepositWindowSet","type":"event"},{"anonymous":false,"inputs":[],"name":"EIP712DomainChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"usdtAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"usdcAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"KYCRecovery","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"usdtAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"KYCRedeem","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"bool","name":"status","type":"bool"}],"name":"KYCStatusSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"usdcAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"NonKYCRecovery","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"enum OperationalMode","name":"previousMode","type":"uint8"},{"indexed":true,"internalType":"enum OperationalMode","name":"newMode","type":"uint8"}],"name":"OperationalModeChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"RecoveredERC20","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"treasury","type":"address"}],"name":"TreasuryAddressSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TreasuryWithdrawal","type":"event"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_KYC_BATCH_SIZE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RECOVERY_TIMESTAMP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TREASURY_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"USDC","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"USDT","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"users","type":"address[]"},{"internalType":"bool","name":"status","type":"bool"}],"name":"batchSetKycStatus","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"bridgeContract","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"depositCap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"depositEnd","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"depositStart","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"depositWindow","outputs":[{"internalType":"uint64","name":"start","type":"uint64"},{"internalType":"uint64","name":"end","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"eip712Domain","outputs":[{"internalType":"bytes1","name":"fields","type":"bytes1"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"version","type":"string"},{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"verifyingContract","type":"address"},{"internalType":"bytes32","name":"salt","type":"bytes32"},{"internalType":"uint256[]","name":"extensions","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isKycApproved","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxDeposit","outputs":[{"internalType":"uint256","name":"maxAssets","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"newStart","type":"uint64"},{"internalType":"uint64","name":"newEnd","type":"uint64"}],"name":"modifyPendingDepositWindow","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"newEnd","type":"uint64"}],"name":"modifyStartedDepositWindow","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operationalMode","outputs":[{"internalType":"enum OperationalMode","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"usdtOut","type":"uint256"},{"internalType":"uint256","name":"usdcOut","type":"uint256"},{"internalType":"bool","name":"isKyc","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeemBridge","outputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"recoverErc20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeemBridge","outputs":[{"internalType":"uint256","name":"usdtOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeemNonKyc","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeemRecoveryKyc","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newBridgeContract","type":"address"}],"name":"setBridgeContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newCap","type":"uint256"}],"name":"setDepositCap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newTreasury","type":"address"}],"name":"setTreasuryAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"sharesKyc","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"sharesNonKyc","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferToTreasury","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transitionToKycMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transitionToRecoveryMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transitionToWithdrawMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transitionToYieldMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"treasuryAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"usdcKycDeployable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000588a1014ad50e345d3ded6770b67ec83357f834000000000000000000000000000000000000000000000000000000000000000e0000000000000000000000000000000000000000000000000000000000000012000000000000000000000000000000000000000000000000000005af3107a400000000000000000000000000000000000000000000000000000000000690ca9e0000000000000000000000000000000000000000000000000000000006915e460000000000000000000000000588a1014ad50e345d3ded6770b67ec83357f83400000000000000000000000000000000000000000000000000000000000000014486f7572676c6173732055534443205661756c7400000000000000000000000000000000000000000000000000000000000000000000000000000000000000066867555344430000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : _admin (address): 0x588A1014aD50E345D3Ded6770B67ec83357F8340
Arg [1] : _name (string): Hourglass USDC Vault
Arg [2] : _symbol (string): hgUSDC
Arg [3] : _depositCap (uint256): 100000000000000
Arg [4] : _depositStart (uint64): 1762437600
Arg [5] : _depositEnd (uint64): 1763042400
Arg [6] : _treasuryAddress (address): 0x588A1014aD50E345D3Ded6770B67ec83357F8340

-----Encoded View---------------
11 Constructor Arguments found :
Arg [0] : 000000000000000000000000588a1014ad50e345d3ded6770b67ec83357f8340
Arg [1] : 00000000000000000000000000000000000000000000000000000000000000e0
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000120
Arg [3] : 00000000000000000000000000000000000000000000000000005af3107a4000
Arg [4] : 00000000000000000000000000000000000000000000000000000000690ca9e0
Arg [5] : 000000000000000000000000000000000000000000000000000000006915e460
Arg [6] : 000000000000000000000000588a1014ad50e345d3ded6770b67ec83357f8340
Arg [7] : 0000000000000000000000000000000000000000000000000000000000000014
Arg [8] : 486f7572676c6173732055534443205661756c74000000000000000000000000
Arg [9] : 0000000000000000000000000000000000000000000000000000000000000006
Arg [10] : 6867555344430000000000000000000000000000000000000000000000000000